INEOS Composites
5220 Blazer Pkwy.
Dublin, OH 43017 US
800-523-6963 | 614-790-9299
americascustomer.composites@ineos.com
ineos.com/composites
About INEOS Composites
IS THIS YOUR COMPANY?
As Seen On CompositesWorld
INEOS Composites Supplies the Following Products
- Adhesive bonding
- Automotive, body panels & substructures
- Automotive, underhood
- Carbon/carbon composites
- Chemical-/corrosion-resistant
- Consulting, process development
- Education/Training
- Fiberglass composite
- Finite element modeling/analysis (FEM/FEA)
- Fire-retardant
- General-purpose
- Low-profile additives
- Machine calibration services
- Marine
- Materials analysis
- Other gel coats
- Sheet molding (SMC)
- Testing, materials
- Testing, product
- Testing, structural
- Unsaturated polyester
- Unsaturated polyester, bisphenol A fumerate
- Unsaturated polyester, DCPD-modified
- Unsaturated polyester, fire-retardant
- Unsaturated polyester, isophthalic
- Unsaturated polyester, low-VOC/no VOC
- Unsaturated polyester, orthophthalic
- Unsaturated polyester, terephthalic
- Vinyl ester
- Viscosity control agents
Trade Names Offered by INEOS Composites
Editorial, News, and Products
-
Biomaterials make strides toward composites sustainability
A compilation of trends in development or application of natural fibers, bio-based resins and more showcases industry players, educational institutes and global projects.
-
Exel launches commercial-scale use of Ineos bio-based resins
Circular feedstock-based Envirez serves as a springboard for the pultrusion specialist to phase out use of hydrocarbon-derived resins, reducing 21% manufacturing emissions.
-
Trillium selects INEOS for next sustainable acrylonitrile facility
INEOS, backing 75% of the world’s operating acrylonitrile capacity, will establish the conversion of plant-based glycerol into acrylonitrile in early 2025.
-
Resins deliver reliability, consistency in hundreds of applications
CAMX 2023: Derakane and Derakane Signia resins from INEOS Composites have high resistance to oxidizing acids, solvents, brine and caustics.
-
Thermoset-thermoplastic joining, natural fibers enable sustainability-focused brake cover
Award-winning motorcycle brake disc cover showcases potential for KTM Technologies’ Conexus joining technology and flax fiber composites.
-
Mass, cost, durability improvements: EV battery enclosures, Part 2
As interest grows in composite battery covers and trays, composite materials suppliers work to meet current and future needs of automakers, battery module producers.
-
Materials & Processes: Resin matrices for composites
The matrix binds the fiber reinforcement, gives the composite component its shape and determines its surface quality. A composite matrix may be a polymer, ceramic, metal or carbon. Here’s a guide to selection.
-
Composites end markets: Industrial (2022)
Composites often must meet a certain aesthetic in applications where the consumer is the end user. But fiber-reinforced materials are just as valuable in industrial applications where corrosion resistance, high strength and durability are the performance key.
-
Brazilian composites industry meets Top of Mind award winners
Latin American Composite Materials Association (ALMACO) releases the winners of the 12th Top of Mind of the Composites Award.
-
ALMACO discloses Top of Mind 2021 award finalists
The primary award for the Brazilian composites sector identifies the three most-voted companies in 27 categories. Winners will be announced Dec. 9.
-
Episode 39: Joe Fox, FX Consulting
Consultant Joe Fox talks about the massive potential for composites use in infrastructure applications and what it will take to turn that potential into reality.
-
Resin shortages continue to affect composites supply chain
Power outages caused by mid-February’s U.S. winter storms led to immediate shortages from Gulf Coast petrochemical companies. Fabricators continue to report shortages.
-
Tecniplas extends useful life of composites equipment used in paper mill by 50%
Taking into accordance corrosive fluids and high process temperatures, the new FRP up flow tower is able to operate for 15 years without need for maintenance.
-
Annual Brazil: Top of Mind of Composites Industry survey begins
The initiative serves to award several most-remembered companies in the Brazilian composites sector each year. Winners will be announced Dec. 10 on ALMACO’s website and social pages.
-
Composites fill the gaps in museum dinosaur skeletons
Ontario-based Research Casting International uses composites to build lightweight, durable dinosaur castings for museums around the world.
-
Composites suppliers, fabricators respond to coronavirus
Companies across the composites industry supply chain share how the COVID-19 pandemic is affecting their businesses, and how they are available to help.
-
INEOS Composites’ Aropol resin emphasizes cosmetics, low shrinkage
Aropol LP 67400 unsaturated polyester resin is suited for above-water-line marine and pontoon small parts, as well as RV parts.
-
INEOS Composites and Ashland after acquisition
INEOS Composites recently acquired the composites polymer business of Ashland, but Ashland’s adhesives business remains. See a breakdown of company products.
-
INEOS completes acquisition of Ashland Composites
Ashland’s Composites Business will become INEOS Composites, and will continue to provide gelcoats and glass fiber-reinforced plastic (FRP).
-
Decommissioned wind turbine blades used for cement co-processing
An initiative to recycle wind turbine blades includes the use of recycled glass fiber composites for cement manufacturing, replacing raw material and saving energy.
-
Chopped carbon fiber, polyamide and innovation redefine the modern pickup truck bed
CarbonPro, the first thermoplastic composite box, boosts damage resistance, reduces mass 28 kg, scales to high production volumes.
-
Reaping the benefits: Composites use grows in agricultural equipment
Multiple trends support composites advances in this huge but fragmented market.
-
Developing fire-resistant resins for composites
Ashland, Polynt-Reichhold and Scott Bader discuss chemistries, applications and future developments for FR composites.
-
Withstanding fire without the weight
New composites meet stringent fire requirements while lightweighting ships, rail cars and battery boxes for electric cars and planes.
-
Energy storage in multifunctional carbon fiber composites
A need for lightweight energy storage technology is fueling the development of carbon fiber composite materials for car batteries and other electronics.
-
Tecnofire adds fire resistance to transportation and infrastructure applications
Intumescent nonwoven veils improve the fire performance of composites in bridge, bus, building, marine and aircraft structures.
-
Ashland names VELOX distributor for Nordic region
Ashland has appointed VELOX as its new main composites distributor for the countries of Sweden, Norway and Denmark.
-
Ashland to sell Composites business and German BDO manufacturing facility to INEOS
The transaction is expected to close prior to the end of the June 2019 quarter.
-
VELOX to distribute Ashland products in Nordics region
The agreement includes Ashland’s resins, gelcoats, bonding pastes and low profile additives.
-
2018 CAMX Award finalists announced
The winning entries will be announced and presented during the General Session at CAMX on Tuesday, Oct.16 in Dallas, TX, US.
-
Composite container protects satellites — on the ground
Cored composites add the strength, smoothness and portability needed for a container built to ship satellites over air, land and water.
-
Automotive tipping point?
CW Editor Jeff Sloan predicts a tipping point for autocomposites after attending this year’s Society of Plastics Engineers’ Automotive Composites Conference and Exhibition (SPE ACCE).
-
U.S. styrene-reduction mandates: Go or no-go?
Legislative changes are slow in coming, but technology forges ahead.
-
Teaming to define what automotive CFRP could be
Ford and Magna explore a high-volume chassis front subframe build from co-molded chopped fiber and noncrimp fabric SMC.
-
Composites Pavilion at AIA 2018
New composite products for architecture/construction and student designs innovate how composites can be used.
-
Ashland partners with Velox for composites distribution in France
All activities previously managed by Quimidroga, will transfer to VELOX France SAS (Paris, France) as of July 1, 2018.
-
Additive manufacturing: Big and going commercial
A demonstration of large-format 3D printing delivers parts for an excavator cab, from CAD data to ready for assembly, in only five hours.
-
Big composite container protects vital satellite
Before they experience the vibrations of launch and the rigors of the space environment, satellites first have to make it to the launch pad. Pagnotta Engineering Inc. (PEI, Exton, PA, US) was called upon by Orbital ATK (Dulles, VA, US) to design a shipping box to protect Orbital ATK’s GEOStar-3 geosynchronous satellite bus structure, during shipment.
-
New Products: April 2018
CW’s monthly roundup of new products for the composites industry.
-
Ashland launches new Derakane resin
New resin improves manufacturing efficiencies and lowers emissions with an innovative styrene suppressant technology while maintaining the performance of the legacy Derakane lines.
-
Ashland releases Derakane Signia
Resin offers added features while maintaining the chemical performance of the legacy Derakane line.
-
Composite fendering piles fit the bill
Composites replace wood in New Jersey marine fender project.
-
Highlights: SPE ACCE 2017
The Society of Plastics Engineers Automotive Composites Conference and Exhibiton (SPE ACCE), held Sept. 6-8 in Novi, MI, US, remains the composites industry’s go-to event for the latest on technology and equipment for automotive composites design, tooling and fabrication.
-
SMC + D-LFT: A hybrid box for the Gen 2 Ridgeline
D-LFT optimizes vertical component functionality while first use of weatherable SMC eliminates paint, reduces mass and stands up to tough-duty use.
-
SMC: Old dog, more tricks
In the sheet molding compound renaissance, the advent of new resins and compounds are broadening the definition and application of this versatile family of composites.
-
Composites at AIA 2017
The ACMA Architectural Division exhibited its 4th annual Composites Pavilion and 2nd annual COMPOSITES CHALLENGE for architectural students.
-
Composites for builders: Establishing structural foundations
Doors open to composites in residential and light commercial construction, above and below ground.
-
SMC: Old dog, new tricks
A sheet molding compound renaissance highlights new reinforcements, new fillers, new matrices, new opportunities.
-
Composites extensively used in Air Force communication tower
The tower was fabricated by Composite Support & Solutions using Ashland Derakane vinyl ester resin designed for pultrusion.
-
SMC is on the upswing (and check out this design competition)
There’s a lot going on with sheet molding compound (SMC) right now, including a design competition for best SMC design, with the winner announced at Composites Europe.
-
Composites in Class A body panels: Evolution continues
Low-density SMCs lead the way as fiber-reinforced polymers make headway in auto components that must please the eye.
-
CAMX 2016 Show Report
The 3rd annual joint ACMA/SAMPE-sponsored trade event comes to Anaheim with an exhibition and conference program attractive to professionals across the composites world.
-
Carbon/epoxy Cadillac hood
Automated process for prepreg hood inner/outer cuts weight by 20% and yields Class A exterior out of the autoclave.
-
Ashland unveils low-density, high-performance SMC
Ashland's new Arotran 771 sheet molding compound (SMC) offers a specific gravity of 1.2, with good mechanical and physical properties. The company is targeting 1.0 specific gravity, which would put SMC on par with aluminum in automotive applications.
-
Structural adhesives, Part I: Industrial
Today’s myriad chemistry options enable formulators to tailor adhesives to customers' exact application requirements.
-
Suppliers team to amp Viking 80C performance
Thanks to a coordinated effort with its fabric, core and panel suppliers, Viking Yachts was able to introduce carbon fiber cost-effectively, shaving weight and boosting speed in its new 24m-long 80C model.
-
Green resins: Closer to maturity
As more players approach the market, R&D expands, but overall market growth in the composites arena is still slow but steady.
-
Composite rebar strengthens riverbed “catfish houses”
Basalt-reinforced polyester rebar eliminates rust and spalling and extends the useful life of concrete catfish spawning and habitat units in Chicago River environmental restoration effort.
-
Bioresins: Not a tsunami, but more like a rising tide
This excerpt from an upcoming article in CW magazine shows that a lot of investigation is happening, and some promising applications are developing.
-
SFMOMA façade: Advancing the art of high-rise FRP
The fabrication and installation of 700+ composite panels has a backstory of detailed design and careful quality assurance.
-
The building envelope: FRP unitized façades
New composite design reduces framing, simplifies construction and improves performance vs. conventional aluminum-framed glass curtainwalls.
-
The matrix (2015)
The matrix binds the fiber reinforcement, gives the composite component its shape and determines its surface quality. A composite matrix may be a polymer, ceramic, metal or carbon. Here's a guide to selection.
-
Back-country boating: Carbon fiber Adirondack pack canoe
Placid Boatworks (Lake Placid, NY, US) makes modern composite versions of classic, but relatively heavy, Adirondack pack canoes, using vacuum-infused carbon fiber. Here's how.
-
SPE ACCE report
Automotive composites still on the horizon — are they getting closer?
-
SPE ACCE 2014 report
Automotive composites still on the horizon — are they getting closer?
-
AIA 2014 Convention report
The ACMA helps American Institute of Architects launch Composites Pavilion at Chicago convention.
-
Dual-laminates: Scaling up to scrubbers
A double-protection strategy for this massive fiberglass vessel tests pushes the limits of this shop’s fabricating and logistical planning skills.
-
Destroyer deckhouse roof meets U.S. Navy fire code with phenolic composite
An all-composite deckhouse superstructure, built by Huntington Ingalls Industries (Gulfport, Miss.) cuts topside weight and enables stealth capability by reducing the radar signature of the U.S. Navy’s new, nearly $4 billion (USD) Zumwalt-class destroyer.
-
Composites steady radio telescope reflector
Precise carbon fiber-reinforced dish prototype could be the model for as many as 2,500 telescopes in the Square Kilometre Array.
-
GFRP enables first grid-connected U.S. floating wind turbine
Composite tower on 1:8-scale system reduces hull size/weight and helps mitigate the overall cost of electric power generation.
-
Public transit: Modular composites update Sao Paulo ferries
When the Brazilian state of São Paulo, through its state-controlled company DERSA, funded new composite superstructures for 12 existing car ferries, Barracuda Advanced Composites (Rio de Janeiro, Brazil) specified materials and engineered the new design.
-
Styrene & cobalt: Headed for the exit?
Fair or not, styrene and cobalt are now considered harmful to humans. Here's an update on the impact this issue poses for the composites industry and what resin and additive manufacturers are doing about it.
-
Sportfishing yacht: Infusion optimized
This well-loved deepsea fishing brand has moved from Miami to a new facility, and to a state-of-the-art resin-infused laminate for its Bertram 64.
-
Fossil and mineral resources: Composites expand
Attention-grabbing applications in these challenging, corrosive environments are positioning fiber-reinforced polymers for continued growth.
-
Maximum thrills: Minimal tools
Water slide manufacturer’s disastrous fire loss opens door to a closed molding process that reduces the number — and cost — of production molds, promising future gain.
-
Composite submarine camels win with long-term durability
U.S. Navy wisely opts for more expensive submarine moorings that maximize lifecycle cost efficiency.
-
Cast polymer market: On the upswing
Postrecession, this commodity industry is emerging stronger and going global as competitive pressures encourage innovation.
-
Revisioning the Viper: Clamshell hood challenge
Autoclave-cured carbon-fiber prepreg hood/fender combo proves as technically formidable as it is visually stunning.
-
JEC Europe 2013 review
Snow in Paris slowed traffic to the show floor but did nothing to cool the enthusiasm of composites innovators in a broad range of markets.
-
JEC Europe 2013 new product showcase
The JEC Europe 2013 trade show (March 12-14, at the Paris Expo, Porte de Versailles, Paris, France) was the venue for introductions of a large number of new composite materials, technologies and manufacturing processes. Here's the CT editorial staff's compilation of what was on display.
-
Bio-composites update: Beyond eco-branding
No longer dependent only on their green credentials, some suppliers of bio-based fibers and resins are competing on price and performance.
-
ACMA COMPOSITES 2013 review
Once again, cautious optimism, an abundance of revealing research and a parade of notable new products are ACMA convention keystones.
-
The building envelope: Betting on the big time
Building code changes and growing architect familiarity feed more frequent composites use in large-scale commercial construction.
-
The structural grid: Prefabrication
Digitally designed and cut, preformed and preinfused stringers and bulkheads reduce boat weight, labor and cycle time and improve boatbuilder process control.
-
Composites slake the world's thirst
As the global thirst for drinkable water increases, the composites industry is drinking in the tremendous possibilities in seawater desalination.
-
ACMA COMPOSITES 2013 preview
For 2013, the American Composites Manufacturers Assn. (ACMA, Arlington, Va.) returns its annual U.S. COMPOSITES exhibition and convention to the East Coast’s sunny, fun capital, Orlando, Fla.
-
Cladding controversy: SMC insulation panels preserve pre-1919 building aesthetics
Acell (Milan, Italy) offers a solution for insulating older buildings that is designed to satisfy advocates of both architectural preservation and environmental conservation.
-
Industrial corrosion control: Huge opportunities
Fiber-reinforced plastic is the ideal but still widely ignored option in environments that eat away at most metal alloys. Opportunities abound, but the key is still education.
-
Designing for high pressure: Large-diameter underground pipe
Careful analysis is needed to ensure success of buried composite piping for industrial applications.
-
COMPOSITES 2012 Highlights
As ACMA’s annual conclave convened in North America’s gambling capital, show exhibitors and attendees placed their bets on better days.
-
SMC sandwich panels: Lean process opens doors
Patented process enables compression molding at lower pressures, saving capital equipment costs for panel fabrication.
-
SPE ACCE 2011: Growing again
The Society of Plastics Engineers’ 11th conference on automotive composites fields a top slate of speakers and attracts its largest crowd.
-
2011 High-Performance Resins Highlights
Attendees reviewed the current state of advanced resin technology and the tests that lay ahead for expanding composites into new applications and markets.
-
Green resins: Growing up
High hurdles remain, but the push for sustainable sources of resin monomers is gaining momentum.
-
Tough resins for aggressive environments
New thermoset systems drive composites deeper into markets where fire, corrosion, stress and fatigue are ever-present threats.
-
Heavy-duty infusion: Scaling up for scrubbers
Infused 3-D woven fabric preforms best steel in beams and unitized deck structures built for the caustic confines of massive flue gas desulfurization systems.
-
Life Cycle Assessment: Are composites "green"?
Methods for calculating the impact composites have on the environment enable data-driven comparisons to traditional materials on a level playing field.
-
Double-bag infusion: 70% fiber volume?
A double vacuum-bag system and tight process control enable repeatable fiber volumes of 60 to 70 percent and improves consistency of infused laminates.
-
IBEX 2010: Looking up in Louisville
A new location helps regenerate a recession-battered industry, drawing in more exhibitors and attendees than in 2009.
-
Blades? Yes! Towers ... maybe
Although steel dominates the utility-scale wind turbine tower market, height increases, on- and offshore, are shifting the wind toward composites.
-
Composites 2010 Product Showcase
The ACMA’s Las Vegas exhibition reflected an industry in recovery.
-
Report from Detroit: NAIAS highlights
Electrics and hybrids make headlines, composites suppliers see hopeful signs after OEM restructuring.
-
DDG-1000 Zumwalt: Stealth warship
U.S. Navy navigates radar transparency, cost and weight challenges with composite superstructure design.
-
Free-form surfacing optimizes free-style kayak
The 6-ft/1.8m-long Project 54cx kayak, made using aramid and carbon fabric-reinforced composites, weighs only 19 lb/8.6 kg.
-
IBEX 2009 Marine Composites Showcase
The 19th International BoatBuilders’ Exhibition & Conference endures the economic “perfect storm” on the Florida coast and looks forward to fairer weather inland.
-
Antiballistics: Composites in the cross hairs
An increasing quantity and variety of fiber/polymer solutions are stopping bullets and blast debris in armored ground vehicles and stationary structures.
-
SPE ACCE 2009 Show Highlights
The Society’s annual conclave highlights composites use in new hybrids and electrics and its prospects in a “post-depression” auto industry.
-
Corvette's carbon hood creates shock and awe
North America’s first mass-produced, all-CFRP hood raises the bar for production sports cars.
-
SPE's ACCE 2009 Show Preview
The Society’s 2009 Automotive Composites Conference & Exhibition charts an industry at a crossroads.
-
Researchers nano-enhance natural fiber
Mississippi State University uses nanoparticle impregnation to improve the performance of kenaf fiber in composites.
-
JEC Composites 2009 showcase
Despite the doleful state of the global economy, the turnout in Paris — exhibitors and visitors — proved surprisingly strong.
-
Composite wing key to high-speed stability
First mass-produced CFRP wing helps supercar achieve downforce and lateral acceleration values superior to many GT racing cars.
-
CNC routers optimize cooling tower build
Although cooling towers traditionally have been made with wood and concrete, composite materials are gaining acceptance due to their corrosion and rot resistance, light weight and ease of installation.
-
COMPOSITES+POLYCON 2009 Showcase
Despite the deepening recession, composites pros returned to the show in its new time slot to explore the wealth of products and services collected here.
-
Resin systems update: The greening of thermosets
Thermoset resin formulators seek environmental benefits as customers demand reduced cost and increased performance.
-
Composites ride and support the rails
Increased ridership and heavier axle loads on rail systems around the world signal a potential boon for composites.
-
Integrated drop-in-place superstructure the solution for Eight Mile Bridge
Based on the successful performance of previous composite bridge decks installed in Hamilton County, Ohio, highway engineers recently took a bold step, specifying an integrated composite bridge superstructure — that is, deck and support beams together in one unit — to replace a deficient span known as Eight Mile Bridge.
-
IBEX 2008 postshow review
Despite a sluggish boatbuilding market, this annual Miami marine showcase was the platform for the introduction of innovative composite products.
-
Engineered fiberglass cladding replaces metal for retail architectural applications
When FormaShape's (Kelowna, British Columbia, Canada) engineering manager Henry Czenczek approached Husky Energy, one of Canada's largest energy companies, his demonstration of the way fiberglass composites could dramatically improve the look, weatherability and vandal-resistance of the ribbed tin architectural cladding on Husky's Travel Centre retail outlets was enough to persuade Husky execs to overhaul the entire network. For the Husky project, FormaShape applied NEi Nastran finite element analysis software, Solidworks 3D, supplied by Noran Engineering Inc. (Westminster, Calif.
-
Composites Pick Up New Applications in Light Trucks
Long a bastion of steel, the tougher-duty pickup segment of the light truck market is warming to the benefits of composites.
-
Taking Subjectivity out of Class A Surface Evaluation
Toward the goal of more consistent, repeatable and quantifiable Class A surface analysis, automakers and systems suppliers are developing and employing automated surface inspection tools.
-
HYBRID COMPOSITE PANEL UNLOCKS HIDDEN VALUE
SMC and flax/polypropylene come together in a single component to add functionality to Nissan’s Sentra.
-
Bio-Composites Update: Bio-Based Resins Begin to Grow
Substituting agricultural for fossil-based feedstocks in polymer resins is not new, but maturing technology now promises composites less dependent on petrochemicals for their performance.
-
FRP troughs help remove iron from mine water discharge
For more than 60 years, iron from iron ore deposits has polluted water that flows out of the abandoned Marchand Mine near Lowber, Pa., into Sewickley Creek and the Youghiogheny River. After it was shut down in the early 1940s, the mine began to discharge iron — almost 1 million lb (more than 450,000 kg) annually. In
-
SMC Flexes Muscles in Other Markets
Often identified with automotive body applications, sheet molding compound shows growing promise in a variety of other temperature- and weather-resistant applications.
-
New hybrid electric bus takes advantage of composites
Mobile Energy Solutions LLC (MES, Golden, Colo.) will soon premiere a “green” transit bus, featuring a fuel cell/hybrid permanent-magnet electric propulsion system (built by UQM Technologies, Frederick, Colo.) optimized for fuel efficiency with an all-composite body. The low-floor, 37-passenger vehicle is being
-
JEC Composites 2007 Product Showcase
This year’s Parisian exhibition provides key evidence of the composites industry’s unprecedented breadth and technical sophistication.
-
Bonding Technology: Thermosetting Structural Adhesives
A wealth of epoxies, polyurethanes and acrylics speed assembly and cut manufacturing cost in an ever-wider range of composites applications.
-
Inside manufacturing: Dual-Laminate Pipe Comes of Age
Computerized pipe fusion and customized multimandrel filament winding equipment mass-produces nearly four miles of pipe for chemical plant in China.
-
Composite Automotive Crush Structures
Tests that characterize, isolate and accurately measure energy absorption modes provide auto engineers the data they need to develop predictive CAE models.
-
Corvette converts floor panels, wheelhousings from glass to chopped carbon
Since 1953, General Motor's Chevrolet Corvette has been a trendsetter in glass-reinforced automotive composites and has served as the test bed for many GM innovations.
-
Inside-the-box thinking pays off for Honda
New Ridgeline pickup features innovative composite box with first-ever molded-in trunk.
-
Corvette gets leaner with carbon fiber hood
Advances in materials and processing yield high-volume, low-mass hood for GM flagship.