Connecting the composites industry

All Topics See All

Additive Manufacturing

Adhesives

Advanced Air Mobility

Aerospace

Application

ATL/AFP

Autoclave

Automation

Automotive

Biomaterials

BMI

Bonding

Braiding

CAMX

Carbon Fibers

Ceramic Matrix Composites

Coatings

Composites 101/Basics

Composites 4.0

Compression Molding

Construction

Consumer

Core

Curing

Custom Content

Cutting/Kitting

CW Top Shops

CW Trending

Cyanate Ester

Defense

Design & Tooling

Design and Testing

Design/Simulation

Digital Demos

Digitization

Economics

Editorial

Electric Vehicles

Electrical

Electronics

Epoxies

Fabrics/Preforms

Fastening

Feature

Filament Winding

Finishing & Fastening

Focus on Design

FRP Rebar

Glass Fibers

Global Composites

Graphene

Hi-Temp Resins

Hydrogen Storage

IACMI

Infrastructure

Infusion

Injection/Overmolding

Inside Manufacturing

JEC

Job Postings

Ketones

Lifecycle Analysis

Machining/Drilling

Marine

Market Outlook

Markets

Mass Transit

Materials

Materials Testing

Medical

Molds/Tools

Nanomaterials

National Composites Week

Natural Fibers

NDT

Out of Autoclave

PAEK

Past, Present and Future

PEEK

PEKK

Plant Tours

Post Cure

Predicting Failure

Prepregs

Pressure Vessels

Processes

Pultrusion

Recycling

Reinforcements

Repair

Resins

RTM

Sensors

Sheet Molding Compound

SHM

Space

Startups & Investors

Sustainability

Thermoplastics

Trends

Troubleshooter

Vitrimers

Weaving

Welding

Wind/Energy

Work In Progress

Workforce Development
Markets See All

4 Aug 2026 Aerospace
Farnborough International Airshow 2026: Progressing the Composite Advantage
At the 2026 Farnborough International Airshow, the focus on next-generation aircraft propulsion, eVTOL and battery-electric aerospace emphasized process and architecture. In particular, it highlighted how structures are placed, cured and protected — rather than focusing solely on the material itself.

29 Jul 2026 Carbon Fibers
Aerospace- and Defense-Grade Carbon Fiber Composites Are Engineered for High Rate
CAMX 2026: Teijin Carbon highlights rapid-cure prepregs, resin infusion systems and thermoplastic composites (TPC) built for high-rate aerospace and defense manufacturing.

27 Jul 2026 Prepregs
Joby Advances With Virgin Atlantic, Aims For Commercial Flights By Year’s End
Joby Aviation and Virgin Atlantic sign agreement to launch air taxi service in London and Manchester as certification for composites-intensive S4 aircraft continues.

24 Jul 2026 Advanced Air Mobility
Joby Aviation's Nobi Kawamura to Keynote SPE ACCE 2026
Nobi Kawamura bring his distinguished background at Toyota and now Joby Aviation, in addition to work on numerous composites-forward projects, to this third keynote.

24 Jul 2026 Advanced Air Mobility
Farnborough 2026 Delivers a Strong Show for Aerospace
From Wing of Tomorrow flight testing to a ramp-up of India-based partnerships, CW’s coverage of this year's air show spans composites news, aircraft orders and more — including updates from Airbus, Lockheed Martin/Sikorsky, Archer/Anduril, Vertical Aerospace and Hexcel.

22 Jul 2026 Mass Transit
3D-FiberTrain Project 3D Prints TPC Rail Components for Velaro MS High-Speed Train
SNAPSHOT: HÖRMANN Vehicle Engineering-led consortium developed a tool-free hybrid process combining large-format 3D printing and continuous fiber tape to produce a front apron and nose demonstrator on a Siemens Mobility’s train.
Design & Tooling See All

29 Jul 2026 Construction
Automating Layer Preparation in Composite Tooling Workflows
Rule-based add-in for CAM workflow automates sliced layer preparation for CNC-machined molds, cutting 10 seconds per layer to 10 seconds per mold for scalable, high-volume custom tooling production.

23 Jul 2026 Automotive
Precision Tooling Expertise Supports Truck, Aerospace Composite Parts Development
CAMX 2026: Lanulfi Moulds builds RIM, thermoforming, rotational molding and compression molding tooling for demanding truck and aerospace components, in addition to providing an integrated approach to tooling projects.

21 Jul 2026 Aerospace
Massivit Opens Europe-Based Service Center to Support RapidWings International Expansion
Barcelona-based facility serves to support the RapidWings on-demand 3D printed tooling platform for aerospace and defense composites manufacturers.

14 Jul 2026 Additive Manufacturing
Dash-CAE Launches Dastrude 100 and 165 for LFAM Composite Tooling
SNAPSHOT: U.K. engineering firm has developed two certified, purpose-built materials optimized for the demanding thermal cycling of composite tools and more rapid carbon fiber monocoque production.

8 Jul 2026 Marine
Curve Works Receives Bureau Veritas Approval for 3D Composite Kits Made Via Reconfigurable Mold
SNAPSHOT: Adaptable mold pioneer in composite parts production for marine, architecture and other markets receives Approval in Principle from classification society for primary load-bearing maritime and shipbuilding construction.

8 Jul 2026 CAMX
CNC-Cut Foam Core Kits Reduce Resin Use, Improve Mold Fit
CAMX 2026: Diab's Advanced Kits use proprietary CNC cutting and custom software to match local mold curvature and cut resin consumption.
Materials See All

4 Aug 2026 Carbon Fibers
Sinofibers Establishes 5,000-MT Production Capacity for Wet-Spun T1100-Grade Carbon Fiber
Wet spinning carbon fiber project has established a stable production capacity for 6,600-MPa and 335-GPa T1100-grade fibers via the development of several key technologies.

4 Aug 2026 Automotive
Avanco Composites CFRP Sleeves Secure Rotor Magnets Without Adhesives
SNAPSHOT: Demonstrated with partner WEKA Elektrowerkzeuge, the press-fitted sleeves use a process that generates high preload, serving rotor diameters from 30 to 300 millimeters.

4 Aug 2026 ATL/AFP
Farnborough International Airshow 2026: Progressing the Composite Advantage
At the 2026 Farnborough International Airshow, the focus on next-generation aircraft propulsion, eVTOL and battery-electric aerospace emphasized process and architecture. In particular, it highlighted how structures are placed, cured and protected — rather than focusing solely on the material itself.

3 Aug 2026 Recycling
First Strategic Acquisition Preps Afterwind for On-Site Wind Blade Cutting Expansion
An accumulation of Advantis A/S equipment, IP and technologies will strengthen Afterwind’s end-to-end recycling efforts and mark its entry into the Danish market.

3 Aug 2026 Core
Robotic Laminography Reveals Microscopic Impact Damage in CFRP Sandwich Panels
Unlike solutions constrained by flat, planar scanning motions and small component sizes, Omni NDE’s NDT methodology is free from movement restrictions, enabling the inspection of larger, more dynamic parts.

31 Jul 2026 Materials
Vitrimer Chemistry Brings Reversability to Thermoset Resins
CAMX 2026: Techstorm’s patent-pending vitrimer resin platform is designed to recycle at temperatures as low as 80°C, targeting full recyclability for wind turbine blades.
Processes See All

4 Aug 2026 Automation
Automation, Oven Heating Technologies Are Synchronized to Target Composite Cycle Times
CAMX 2026: Fmtec solution’s automated loading and unloading systems are designed to work with HK-Präzisionstechnik’s convection ovens for thermoplastic and thermoset processing.

4 Aug 2026 Aerospace
Farnborough International Airshow 2026: Progressing the Composite Advantage
At the 2026 Farnborough International Airshow, the focus on next-generation aircraft propulsion, eVTOL and battery-electric aerospace emphasized process and architecture. In particular, it highlighted how structures are placed, cured and protected — rather than focusing solely on the material itself.

3 Aug 2026 Filament Winding
Engineering Technology Corp. Celebrates National Composites Week By Inspiring Utah’s Future Engineers
ETC partners with Beehive Science and Technology Academy for the “From Curiosity to Career” initiative, where future engineers with experience composites in action and gain insight into science, technology, engineering and composites careers.

3 Aug 2026 Machining/Drilling
Modular CNC Platform Scales to Fit Oversized Composites Production
CAMX 2026: C.R. Onsrud presents the LR-Series machining center, which handles work areas up to 92 feet long, 20 feet wide and 10 feet tall for composites, foam and nonferrous metals.

31 Jul 2026 Adhesives
Multiyear Airbus Supply Agreement Continues Syensqo Materials Backing
The contract covers composites and adhesives that will support Airbus’ commercial aircraft, defense and space, and helicopter programs.

31 Jul 2026 Automation
AI Control Enables Faster, More Even Infrared Heating for Complex TPC Parts
KraussMaffei develops high-resolution, smart heating for load-optimized tailored organosheets and blanks, enabling consistent high-rate production of complex thermoplastic composite and overmolded parts.
Composites 101 See All

19 Jun 2026 Wind/Energy
Composites end markets: Energy (2026)
Composites continue to drive energy innovations, from new materials and installations of recyclable wind blades to nuclear CMC and offshore oil pipelines.

10 Jun 2026 Epoxies
Snap-Cure Epoxy Prepreg Systems: Thermoset Performance at Thermoplastic Speeds
The autoclave has long defined thermoset composites processing — snap-cure epoxy prepreg systems are built around the premise that it doesn't have to.

13 Apr 2026 Advanced Air Mobility
Composites End Markets: Aviation and Advanced Air Mobility (2026)
Market outlook highlights commercial, defense and bizjet upturn, shift to Asia/rise of India while supply chain struggles to meet rate, AAM begins pivot toward commercial routes plus trends in civil UAS, electric aircraft and the latest in composites developments.

7 Jan 2026 Pressure Vessels
The need for process modeling in filament winding applications
A discussion of how temperature, mandrel material and thickness, plus other factors affect the outcome of repeatable filament-wound composite shell manufacturing.

17 Dec 2025 Feature
Composites end markets: Industrial (2026)
Composites solve performance, weight, durability challenges and more in a variety of industrial applications. Recent notable examples include fire truck pumps, biogas reactor tanks and shipping pallets.

11 Nov 2025 Thermoplastics
Thermoplastic composite fabrication: Thermal processing
Establish a proper thermal cycle during TPC rapid forming and achieve reproducible, successful parts through key material selection and process method understanding.
- Webinars
- Events
- Suppliers
- Whitepapers
Webinars See All

On Demand
Material Advantage: How Advanced Composites Shape the Modern Battlefield
As modern warfare evolves towards increased speed, autonomy, and precision, the role of advanced composite materials has become more critical than ever. This webinar explores how high-performance carbon fibers and advanced composite materials enable breakthrough capabilities across air, land, sea, and space- based domains. Key topics include light-weighting for extended range and endurance, thermal performance, producibility, connectivity, and affordability.Drawing on recent applications in unmanned systems and higher operating temperature platforms, the discussion highlights how material selection and architecture directly influence mission effectiveness and survivability. Attendees will gain insight into emerging material technologies, manufacturing considerations, and qualification opportunities with defense applications.The session concludes with a forward-looking perspective on how composites will shape future battlefield dynamics, including increased autonomy, increased rate, and distributed systems all within rapid decision-making environments.AgendaOverview of the evolving battlefield and how advanced composite materials act as key enablersAdvancing affordable mass manufacturing for defense platforms through high-rate composite solutionsDatabase materials for accelerated, cost-effective part qualificationAdvanced material solutions engineered for structural performance, high-temperature environments, and radar transparency (low dielectric applications)

On Demand
High-Performance, Non-PFAS Options For Release & Protective Films
Despite the versatility of fluoropolymers in demanding, high-performance applications under harsh environments, many of them have been classified as per- and polyfluoroalkyl substances (PFAS) and are facing increasing regulatory scrutiny. However, polyvinyl fluoride (PVF) is outside all current regulatory definitions of PFAS due to the lack of full fluorination and the presence of hydrogen on each carbon in the backbone of the polymer. This positions PVF as a sustainable alternative to traditional fluoropolymers while retaining outstanding weatherability, durability and chemical resistance. In this talk, DuPont will review composite applications currently commonly utilizing PFAS materials and the status of PVF as a non-PFAS fluoropolymer within the regulatory landscape. DuPont will highlight PVF's exceptional surface protection and barrier properties, its compatibility with multiple composite manufacturing processes and its multifunctional use as a release film. Agenda Review of current PFAS regulations and in-scope materials Use cases for PFAS materials (films and coatings) in composite applications Non-PFAS options: range from non-fluorinated lower-performance materials to non-PFAS polyvinyl fluoride Overview: what PVF is, why it is non-PFAS and what its attributes are Real-world case studies

On Demand
Low-Dielectric Thermoset Materials for Radome Design: Selection, Qualification and NCAMP Allowables
As aerospace and defense radar systems push into higher frequency bands with increasingly complex antenna arrays, radome material selection becomes a critical design variable. Composite architectures must simultaneously satisfy dielectric performance targets and structural, thermal, and environmental qualification requirements that vary across platform and mission profiles.In this webinar, Tom Sutter of Renegade Materials examines the latest low-dielectric thermoset material systems developed for radome applications, with emphasis on how specific Renegade systems address design requirements across relevant frequency ranges. The session covers material qualification pathways, manufacturing challenges, and an NCAMP-published design allowables database — a publicly available resource for reducing qualification risk and supporting certification efforts.Attendees will leave with a technical framework for evaluating and qualifying next-generation radome materials against electrical, structural, and regulatory design requirements.

On Demand
Integrating AI and Machine Learning to Accelerate Composite Resin Formulation
Artificial intelligence and machine learning have entered into everyday usage, but what impact can they have on polymer and ceramic matrix composites development? Composite performance depends heavily on matrix properties that govern processability and operational stability. Increased digitization is providing clear value across industries, but successful application in composite resin formulations requires a clear understanding of the key questions and insight into the critical design factors. Combining expert know-how and atomic-level detail with powerful artificial intelligence and machine learning tools enables resin formulation teams to maximize successful design initiatives. This webinar will demonstrate how integrating machine learning with molecular simulation enables faster, more informed development of next-generation resin formulations.

On Demand
Driving Innovation in Sustainable Manufacturing
As the composite industry shifts toward a circular economy, manufacturers face a dual challenge: integrating nontraditional feedstocks while maintaining high-performance output. This session explores the technical pathways for processing recycled carbon fibers, natural fibers and waste-derived materials using advanced scattering and double-belt press technology. Rather than viewing sustainability as a cost burden, this webinar will examine the "define and refine" methodology—a systematic approach to optimizing material composition and recipe accuracy. Attendees will learn how continuous production cycles reduce energy demand and processing steps compared to traditional batch methods, supported by data-driven insights into carbon dioxide reduction and process repeatability. Agenda Brief introduction to IPCO and overview of 2025/2026 market trends and their significance Innovations and next-generation products: using recycled materials for interior and exterior applications Energy efficiency and process optimization: reducing energy demand and processing steps Versatility and material selection: handling virgin and waste stream feedstock materials Scalability and production reliability: repeatability, recipe accuracy, and energy savings

On Demand
Aligned Discontinuous Fibers: Sustainability without Compromising Performance
The composites industry is under increasing pressure to deliver high-performance materials while improving sustainability, manufacturing efficiency and design freedom. Manufacturers are being asked to reduce waste, integrate recycled content and support complex part geometries — all without compromising quality, scalability or process compatibility. These demands are driving the need for new material formats that move beyond conventional tradeoffs.In this webinar, Mandy Clement will introduce UNIMAT, a scalable aligned nonwoven solution from James Cropper. Achieving more than 95 percent fiber alignment, UNIMAT delivers exceptional mechanical performance while offering the flexibility required for modern composite manufacturing. Clement will explore how UNIMAT enables the use of recycled and post-industrial waste (PIW) carbon fiber, supports complex geometries through improved conformability and integrates with multiple resin systems and processing routes.Dale Brosius will then place this innovation in a broader industry context, examining how aligned nonwovens can help address key challenges across composite markets. From aerospace and automotive to sporting goods and advanced air mobility, the session will highlight how this material approach supports circular manufacturing, reduces cost and material waste, and unlocks new design possibilities — enabling manufacturers to align composite performance with sustainability goals.Agenda:Attendees will gain insights into technical breakthroughs and how UNIMAT can provide new pathways for the composites market to achieve sustainability goals. Key points include:Why sustainability and processability are critical pain points in composites today.Innovative Alignment Technology: How UNIMAT delivers directional performance with the added benefit of design flexibility and handling.Circular Economy Impact: The role of recycled and post-industrial fibers in meeting sustainability targets.Hybridization: Fiber agnostic processing technology gives manufacturers and partners freedom to design bespoke solutions, including the incorporation of thermoplastic fibers, low-melt resins, recycled blends and more.Integration with multiple processes and resin systems for scalable manufacturing.

3 Sep 2026 New & Upcoming
Establishing and Monitoring Surface Cleanliness and Contamination for Adhesion Quality Register Now
Events See All

11 Aug 2026
NDIA Tennessee Valley - 29th Space and Missile Defense Symposium
The NDIA Tennessee Valley chapter hosts 29th Space and Missile Defense Symposium on Aug. 11-13, 2026 in Huntsville, AL.

18 Aug 2026
Extrusion Conference 2026
Extrusion's general sessions cover best practices, troubleshooting and processing solutions that can help you run your operation and maximize the utilization of your existing assets—as efficiently as possible. Extrusion professionals from the shop floor to the front office are represented at the Extrusion Conference. You’ll meet the entire global supply chain: manufacturing managers, supervisors, engineers and technicians, as well as engineers and technical managers at OEMs and other firms.

24 Aug 2026
National Composites Week 2026
Celebrate National Composites Week 2026! The goal of National Composites Week is to celebrate and bring attention to the myriad ways that composite materials and composites manufacturing contribute to the products and structures that shape the American manufacturing landscape today. Learn how you can participate in this year's National Composites Week on NationalCompositesWeek.com.

25 Aug 2026
NDIA - 2026 Space Warfighter Forum
NDIA hosts 2026 Space Warfighter Forum on Aug. 25-27, 2026 in Colorado Springs, CO.

8 Sep 2026
NDIA - Emerging Technologies for Defense Conf. & Exhibition
NDIA hosts Emerging Technologies for Defense Conf. & Exhibition on Sept. 8-10, 2026 in Washington, DC.

9 Sep 2026
SPE ACCE 2026
The Society of Plastics Engineers Automotive Composites Conference & Exhibition (SPE ACCE) is a global forum for the automotive and transportation industries to learn about the latest advancements, applications and benefits of polymer composites (thermoset and thermoplastic) for lightweighting, performance, sustainability and electric vehicles (EVs). Hosted annually by SPE’s Automotive & Composites Divisions, it brings together OEMs, suppliers, academia and professionals for technical presentations, exhibits, networking and student competitions.

10 Aug 2026 New & Upcoming
The 14th Canadian-International Conference on Composites (CANCOM) Register Now
Suppliers See All

Additive Manufacturing

Business Development

Cleaning & Pretreatment

Inspection, Testing, Measurement

Manufacturing Execution & Automation Software & Controls

Manufacturing Services

Materials

Pollution Control & Sustainability

Supplies

Temperature/Pressure Control Equipment

Workholding

Get Listed!
Thousands of people visit our Supplier Guide every day to source equipment and materials. Get in front of them with a free company profile.
Request Your Free Listing
Whitepapers See All

10 Jan 2024
Jetcam addresses the economic importance of efficient material nesting
Jetcam’s latest white paper explores the critical aspects of nesting in composites manufacturing, and strategies to balance material efficiency and kitting speed.

8 Jan 2024
Arris Composites demonstrates advantages of natural fibers applied with Additive Molding
Arris presents mechanical testing results of an Arris-designed natural fiber thermoplastic composite in comparison to similarly produced glass and carbon fiber-based materials.

27 Dec 2023
Cevotec white paper presents novel approach for H2 tank production
Cevotec, a tank manufacturer, Roth Composite Machinery and Cikoni, have undertaken a comprehensive project to explore and demonstrate the impact of dome reinforcements using FPP technology for composite tanks.

23 Nov 2023
KCARBON and KIST develop lyocell/PLA/wood biocomposites
Initial demonstration in furniture shows properties two to nine times higher than plywood, OOA molding for uniquely shaped components.

1 Nov 2023
Exel Composites releases guide for design considerations in composite tubes
The composite tubes white paper explores some of the considerations for specifying composite tubes, such as mechanical properties, maintenance requirements and more.

21 Jul 2023
UAMMI white paper addresses composites recycling in Utah
Foundational research discusses the current carbon fiber recycling landscape in Utah, and evaluates potential strategies and policies that could enhance this sustainable practice in the region.
Articles See All

3 Aug 2026 Automation
Robotic Laminography Reveals Microscopic Impact Damage in CFRP Sandwich Panels
Unlike solutions constrained by flat, planar scanning motions and small component sizes, Omni NDE’s NDT methodology is free from movement restrictions, enabling the inspection of larger, more dynamic parts.

31 Jul 2026 Thermoplastics
AI Control Enables Faster, More Even Infrared Heating for Complex TPC Parts
KraussMaffei develops high-resolution, smart heating for load-optimized tailored organosheets and blanks, enabling consistent high-rate production of complex thermoplastic composite and overmolded parts.

29 Jul 2026 Molds/Tools
Automating Layer Preparation in Composite Tooling Workflows
Rule-based add-in for CAM workflow automates sliced layer preparation for CNC-machined molds, cutting 10 seconds per layer to 10 seconds per mold for scalable, high-volume custom tooling production.

27 Jul 2026 Aerospace
VIDEO: Braided TPC Tube System Takes on Cryogenic Fuel Lines
Ductility at cryogenic extremes, not to mention the ability to bend to the complexities required for aerospace, led herone to pursue thermoplastic composites for LH2 fuel lines — with promising results. The company speaks more on the subject in this CW article and Thermoforged video.

24 Jul 2026 CAMX
What to Know Before CAMX 2026
Get ready for CAMX 2026 in Atlanta! Explore 500+ exhibits, 100+ sessions, keynotes, networking events and tips to make the most of your experience.

22 Jul 2026 Automotive
VIDEO: Polestar 5 Flax Fiber Seatbacks Put Circularity By Design Into Production
Polestar's collaboration with Bcomp on the Polestar 5 interior, highlighted through CW content and this snapshot video, demonstrates how design for end-of-life recyclability and lightweighting can be achieved in a single production part.

4 Aug 2026 Thermoplastics
Farnborough International Airshow 2026: Progressing the Composite Advantage
Sustainability See All

29 Jul 2026 Sustainability
Nlcomp Opens RFactory, With Sustainable Composites and Maritime Projects in the Works
The 2019 startup’s first production facility is already in operation to meet its ambitious project pipeline, including Offshore 34 fit-out, rComposite sails manufacture and other R&D activities.

22 Jul 2026 Sustainability
European Circular Composites Alliance Working Groups Shift From Strategy to Action
ECCA’s five working groups share progress on circular composites across vehicles, construction, aerospace and other industries, each with goals and priorities to translate that work into actionable items.

20 Jul 2026 Sustainability
Climate Impulse Project Receives Official Patronage from European Commission
The strategic endorsement reflects the EU’s firm commitment and alignment with the project’s zero-emission aviation ambitions, industrial competitiveness and strategic autonomy.

14 Jul 2026 Recycling
Nlcomp Selected for Amazon Sustainability Accelerator 2026
The European program supports companies committed to product sustainability, gives nlcomp the opportunity to accelerate rComposite commercial development beyond marine.

10 Jul 2026 Recycling
Exel Composites, OCF Build Commercial-Scale Use of Circular Composites Across Europe
The composites manufacturer has strengthened its partnership with Original Composites & Fiberglass to adopt Sustaina continuous filament mat in its production process.

8 Jul 2026 Automotive
FURHY Publishes Concrete Technological Advances Toward Bio-Based, 100% Recyclable Composites
SNAPSHOT: Gen 2 Carbon, RINA and OlgunCelik A.S. contributed three new key exploitable results (KERs) for the FURHY project covering nonwoven reinforcements, life cycle assessment and automotive components.

31 Jul 2026 Sustainability
Vitrimer Chemistry Brings Reversability to Thermoset Resins
Knowledge Centers

Sensors for Composite Processing

The Now and Next in Composites

_

CompositesWorld Collections
CW’s editors are tracking the latest trends and developments in tooling, from the basics to new developments. This collection, presented by Composites One, features four recent CW stories that detail a range of tooling technologies, processes and materials.

Automated Composites
In this resource, CGTech offers vital information about the benefits, processes, and vendors behind automated composite manufacturing.

Composites and Carbon Fiber in Hydrogen Storage
The materials, manufacturing processes, market and energy trends driving use of carbon fiber composites in global hydrogen storage applications for fuel cell-powered trucks, buses, trains and passenger vehicles.

High-Temp Composites

Sustainability
The composites industry is increasingly recognizing the imperative of sustainability in its operations. As demand for lightweight and durable materials rises across various sectors, such as automotive, aerospace, and construction, there is a growing awareness of the environmental impact associated with traditional composite manufacturing processes.
View Knowledge Center
CW Tech Days

High-Temp Composites
As defense and space missions push the boundaries of performance, the demand for advanced materials that can endure extreme environments and conditions continues to grow.

Composites in Infrastructure and Construction
CompositesWorld’s CW Tech Days: Infrastructure event offers a series of expert presentations on composite materials, processes and applications that should and will be considered for use in the infrastructure and construction markets.

Composites in Advanced Air Mobility
Explore the cutting-edge composites industry, as experts delve into the materials, tooling, and manufacturing hurdles of meeting the demands of the promising advanced air mobility (AAM) market. Join us at CW Tech Days to unlock the future of efficient composites fabrication operations.

Thermoplastics for Large Structures
Thermoplastics for Large Structures, experts explored the materials and processing technologies that are enabling the transition to large-part manufacturing.

Sustainability in Composites Manufacturing
Explore the technologies, materials, and strategies that can help composites manufacturers become more sustainable.

Design, Simulation and Testing Technologies for Next-Gen Composite Structures
CompositesWorld’s Tech Days: Design, Simulation and Testing Technologies for Next-Gen Composite Structures is designed to provide a multi-perspective view of the state of the art in design, simulation, failure analysis, digital twins, virtual testing and virtual inspection.

New Space Applications
Explore the technologies, materials and strategies used by composites manufacturers working in the evolving space market.

Bonding and Welding
Explore the latest technologies and strategies involving bonding and welding, essential processes in the assembly and manufacturing of composite materials, providing reliable methods for joining components.

Merging Materials and Technologies for Infrastructure and Construction
During this CW Tech Days event, sponsored by Composites One, experts will offer presentations to review and evaluate the composite materials, processes and applications that should and will be considered for use in the infrastructure and construction markets.

Composites in the Hydrogen Economy
In these sessions, experts will discuss the emerging hydrogen economy and the opportunities for composites in this lucrative space.
Collections See All

Composites in Hydrogen Storage
A report on the demand for hydrogen as an energy source and the role composites might play in the transport and storage of hydrogen.

Recycled Composites
This collection features detail the current state of the industry and recent success stories across aerospace, automotive and rail applications.

Thermoplastic Composites
This collection details the basics, challenges, and future of thermoplastic composites technology, with particular emphasis on their use for commercial aerospace primary structures.

Tooling
This collection features recent CW stories that detail a range of tooling technologies, processes and materials.

Home
Suppliers
Fibrtec Inc.

Fibrtec Inc.

AS SEEN ON CW
TRADE NAMES

1935 Randall Rd
Texarkana, TX 75501 US
903-826-2174
bob@fibrtec.com
fibrtec.com

About Fibrtec Inc.

Licenses a patented thermoplastic prepreg technology. Flexible tows make a conformable textile preform.

IS THIS YOUR COMPANY?

UPDATE YOUR LISTING SUBMIT A PRESS RELEASE TO OUR EDITORIAL TEAMS

As Seen On CompositesWorld

Third patent issued for flexible thermoplastic prepreg

IACMI: Driving innovation in the advanced composites industry

Overmolding on the cheap

IACMI, DuPont, Fibrtec and Purdue University explore new thermoplastics manufacturing process

CAMX 2014 show report

CAMX 2014 exhibit previews, part 2

SAMPE 2013 Long Beach new product showcase

VIEW ALL ARTICLES

Fibrtec Inc. Supplies the Following Products

Trade Names Offered by Fibrtec Inc.

Fibrflex
Towflex

Editorial, News, and Products