Airtech 3D Printing Solutions
Published

U.S. Coast Guard MBI releases report on Titan submersible

The two-year investigation into the June 2023 tragedy that took five lives has been published, citing key findings, contributing factors to the casualty and a recommended regulatory framework to avoid future oversight.

Share

The U.S. Coast Guard Marine Board of Investigation (MBI, Washington, D.C., U.S.) has released its Report of Investigation (ROI) on the loss of the Titan submersible, which imploded during a June 2023 dive to the Titanic, killing five people. The Titan was a 22-foot manned submersible with an 8-foot long carbon fiber composite pressure hull glued to titanium end sections.

The more than 300-page ROI outlines key findings and contributing factors in the casualty and includes 17 safety recommendations aimed at strengthening oversight of submersible operations, improving coordination among federal agencies and closing gaps in international maritime policy. 

“This marine casualty and the loss of five lives was preventable,” says Jason Neubauer, Titan MBI chair. “The 2-year investigation has identified multiple contributing factors that led to this tragedy, providing valuable lessons learned to prevent a future occurrence. There is a need for stronger oversight and clear options for operators who are exploring new concepts outside of the existing regulatory framework. I am optimistic the ROI’s findings and recommendations will help improve awareness of the risks and the importance of proper oversight while still providing a pathway for innovation.” 

The board determined the primary contributing factors were OceanGate’s inadequate design, certification, maintenance and inspection process for the Titan. Other factors cited in the report include a toxic workplace culture at OceanGate, an inadequate domestic and international regulatory framework for submersible operations and vessels of novel design, and an ineffective whistleblower process under the Seaman’s Protection Act. 

The board also found OceanGate failed to properly investigate and address known hull anomalies following its 2022 Titanic expedition. Investigators determined the Titan’s real-time monitoring system generated data that should have been analyzed and acted on during the 2022 Titanic expedition. However, OceanGate did not take any action related to the data, conduct any preventative maintenance or properly store the Titan during the extended off season before its 2023 Titanic expedition. 

MBI recommendations include restricting the Oceanographic Research Vessel designations for submersibles; expanding federal and international requirements to all submersibles conducting scientific or commercial dives; and requiring Coast Guard documentation for all U.S. submersibles. The board also recommended adding Coast Guard personnel capacity at Coast Guard headquarters to support new construction oversight and field inspections involving submersibles and vessels of novel design. 

Further recommendations include requiring operators to submit dive and emergency response plans to the local Coast Guard officer in charge, marine inspection; evaluating the Coast Guard’s subsea search and rescue capabilities; and working with the International Maritime Organization (IMO) to define passenger submersibles and expand international safety requirements for submersibles operating on the high seas. The board also called for a new Occupational Safety and Health Administration and Coast Guard agreement to clarify whistleblower investigative protocols and improve interagency coordination. 

The Marine Board’s report is now under review by the Commandant of the Coast Guard. Upon completion of the review, the Commandant will issue a Final Action Memorandum confirming the U.S. Coast Guard’s position on the recommendations and any actions to be pursued.  

The complete Marine Board report can be downloaded here.

Airtech
CONTRAX
advanced materials development
Industrial CNC Routers
supplier of essential composite materials
CAMX 2026
DJ Engineering on Thermwood LSAM
Advanced polymeric composites
multi-component injection molding process
VIRTEK IRIS AI COMPOSITE INSPECTION
Airtech
release agents, purging compounds,process aids

Related Content

Large-format AM speeds plug production for manufacture of composite boat molds

Hungarian manufacturer Rapid Prototyping transitioned its conventional foam milling process to 3D printing to produce faster, higher quality, recyclable foam plugs and composite boat molds.

Read More

Functionalizing surfaces for sustainability

Riblets reduce drag, fuel consumption, CO2 emissions and noise while boosting power output, flow rates, speed and efficiency.

Read More
Wind/Energy

Hybrid composite architecture enables rigid wind propulsion solution for maritime decarbonization

GT Wings’ AirWing leverages aerospace engineering principles combined with hybrid glass and carbon fiber composite construction to deliver up to 30% fuel savings through compact, deck-compatible wind propulsion.

Read More
Sustainability

Anemoi installs 35-meter-tall composite rotor sails on Sohar Max maritime vessel

Carbon fiber-reinforced epoxy composites are key to building these long-lasting wind propulsion technologies for energy-efficient watercraft.

Read More

Read Next

Marine

Revisiting the OceanGate Titan disaster

A year has passed since the tragic loss of the Titan submersible that claimed the lives of five people. What lessons have been learned from the disaster?

Read More
Marine

REGENT forms REGENT Defense, unveils defense seaglider product line

ISR, medevac and other maritime defense missions will be supported through the new line of high-speed, long-range, low-signature marine craft, which build off the company’s composites-intensive Viceroy.

Read More
Marine

Anemoi wins U.K. funding to advance CFRP rotor sail designs

Seven-month project will develop folding sail systems for Anemoi’s 3.5-meter-diameter rotor sail, and cover additional design optimizations that are expected to improve the aerodynamic performance of wind-assisted vessels.

Read More
Airtech 3D printing Solutions