1830 Airport Exchange Blvd.
Ste. 110
Erlanger , KY 41018 US


As Seen In CompositesWorld

Laser inspection for aerospace composites fabrication

LAP Laser laser-based camera system for composites fabrication
LAP Laser (Lüneberg, Germany) has introduced the DTEC-PRO camera system, a laser-based ply-placement vertification system designed to increase efficiency in composites manufacturing for aerospace applications.

LAP Laser DTEC-PRO laser projection, JEC World 2019

JEC World 2019 preview: LAP Laser
LAP Laser (Lüneberg, Germany, 5/F5) is featuring flexible applications of the DTEC-PRO camera system, showing how laser-based composites fabrication in the aerospace, automotive and other industries can be faster, safer and more flexible.

Spirit AeroSystems

The first composite fuselage section for the first composite commercial jet
Spirit AeroSystems was an established aerospace supplier when it earned that distinction, winning the contract for the Boeing 787’s Section 41. Now its sights are set on the next generation of aircraft.

Webinar: Camera-Assisted Laser Projection for Acceleration of Manual Composite Lay-Up

Webinar: Camera-Assisted Laser Projection for Acceleration of Manual Composite Lay-Up
CompositesWorld is presenting a free LAP sponsored webinar on Thursday June 5, at 11:00 am EDT, on camera-assisted laser projection for composite lay-up.

iComposite 4.0 AZL Schuler press glass fiber spray deposition preform with local carbon fiber UD patches

iComposite 4.0 — cutting composites cost by 50%
An intelligent, integrated process using 3D fiber spraying, inline inspections/simulation and embedded RFID chips to cut scrap and rejections for structural HP-RTM epoxy parts.

laser projection systems

Laser projection: Envisioning more than templates
Advanced systems offer ply-placement verification, aids to faster assembly and manufacturing process and quality control.

LAP Laser introduces new tablet PC and software integration capability
Airbus Stade and Czech supplier LA Composite report reduced layup labor and scrap while improving CFRP part quality.

Isotruss bicycle

SAMPE 2009 Product Showcase
Showgoers at the SAMPE 2009 Conference and Exhibiton in Baltimore, Md. found many suppliers undeterred by poor economic news. 

SEICO 09 at a Glance

SAMPE Europe/JEC Composites 2009 preview
SAMPE Europe’s 30th annual spring conclave and the nearby JEC Composites Show characterize the latest in material and process technologies.

JEC 2009 floor map

JEC Composites 2009/SAMPE Europe preview
 Organizers predict good turnout in poor economy for annual Paris tradeshow.

Product Categories of LAP Laser LLC

Auxiliary processing equipment, repair equipment, and supplies
  • Auxiliary processing equipment
    • Projection/alignment systems, laser
Fiber converting/prepreg manufacturing equipment
  • Web measurement and control equipment