Hawkeye Industries Inc.
PO Box 415
Bloomington , CA 92316 US
As Seen In CompositesWorld
Racing to build tomorrow’s automotive composites workforce
Recent graduates share experiences gained from collegiate automotive design, engineering and motorsport competition Formula SAE.
Composites suppliers, fabricators respond to coronavirus
Companies across the composites industry supply chain share how the COVID-19 pandemic is affecting their businesses, and how they are available to help.
Aviation’s big US show: Oshkosh 2017 highlights
The 2017 edition of the Experimental Aircraft Assn.’s (EAA) AirVenture airshow event, held in Oshkosh, WI, US, from July 24 – 30, was another blockbuster.
Composites enable portability in driving simulator
FRP design enables portable, light-tight, enclosure with an image-projection-grade inner surface.
Oshkosh’s AirVenture 2016 included a big infusion event
The big annual airshow featured the on-site infusion of complete aircraft fuselages for two kit aircraft.
Oshkosh “Fly-In” preview: Multi-day infusion demo
Visitors to the Experimental Aircraft Assn.’s (EAA) AirVenture 2016 (July 25-31) will have the opportunity to attend a reprise of last year’s multi-day infusion processing demo, again sponsored by Innegra Technologies (Greenville, SC, US).
Composites lighten driving simulator dome
A first for its codevelopers, Pagnotta Engineering Inc. (PEI, Exton, PA, US) and JRL Ventures (Cape Coral, FL, US), this low-mass enclosure spawned a new product venture for the pair in research-oriented driving simulation systems.
Moldmaker bypasses patterns for high-tech production catamarans
Direct-to-milled-tool process simplifies large deck mold development.
Resin infusion produces autoclave-capable tools for Scorpion jet
Leading Edge Aerospace designs and builds cost-effective prototype tools for maverick military aircraft concept.
VX Aerospace: Small company, big performance
Innovative design, OOA manufacturing and C-PLY laminate construction produce “big fabricator” aerostructures in fewer steps at low cost.
Building a bigger Big Wheel
Machining specialist scales up the 1970s icon, producing plugs and tools for an exact fiberglass replica at a Disney resort.
Engineering Insights: Not Your Father's EV
A stylish composite body makes the world's first all-electric sports car not only lean and green but efficient and fast as well.
Team-built bus body bests all
OEM meets tight development schedule on superlight multipart molded shell to offset propulsion system weight in fuel cell-powered transit bus.
COMPOSITES & POLYCON 2009 preview
The ACMA’s annual tradeshow takes its first turn in its new January timeframe.
Composites take the hit in U.S. Navy patrol boat
New carbon/Kevlar composite hull and deck provide impact-absorbing solution to crew injury problems caused by severe vertical acceleration of previous high-speed, all-metal patrol boat.
Engineering Insights: Composites Lessen Load in Fuel-Cell Demonstrator
CFRP decklid helps offset fuel-cell system weight to meet vehicle weight target.
The Basics Of Boat Design
Naval architects reveal design, tooling and material selection guidelines for a new sportfishing powerboat.
- Gel coats
- Other gel coats
- Coatings and sizings
- Flame retardant
- Other coating materials
- Fairing compounds (formerly paste systems)
- Resin additives & modifiers
- Other additives/modifiers
- Tooling equipment, materials and supplies
- Master pattern material, other
- Mold cleaners
- Mold polishes