Resins
Composite molding compound replaces Invar for lightweight small satellite structures
Patz Materials and Technologies and Lawrence Livermore National Laboratory developed a new monolithic optics housing with 80% less weight, near-zero CTE and the high-volume manufacturing required for commercial space.
Read MoreMatsumoto Fine Chemical unveils solution for efficient infusion process with one-part epoxy resins
New one-part epoxy resin X-1366R shows very low viscosity and can be easily impregnated to reinforcing fibers at room temperature without resin/hardener mixing process.
Read MoreAvient presents Hammerhead sandwich panels for boatbuilders
Continuous glass fiber-reinforced thermoplastic panels offer the marine industry lightweighting and production efficiency compared to traditional construction materials.
Read MoreAsahi Kasei presents circular composite solutions for EV batteries
Novel thermoplastic composite materials, a bio-based and biodegradable nanofiber and a technology that chemically recycles PA66 polymers enable more circular, lightweight and connective EVs.
Read More9T Labs selected to supply composite connectors to Dufour eVTOL
Structural thermoplastic composite connectors will further lightweight the Aero2 tilt-wing aircraft.
Read MoreSperlu prepolymers enable high-performance epoxy resins with up to 80% bio-based content
Spero Renewables has received funding to further scale its pilot production, enabling tunable epoxy resins for composites with Tg of 65-160°C and storage modulus >2,000 megapascals.
Read MorePlant tour: Arris Composites, Berkeley, Calif., U.S.
The creator of Additive Molding is leveraging automation and thermoplastics to provide high-volume, high-quality, sustainable composites manufacturing services.
Read MoreComplex recycled CFRTP parts demonstrate discontinuous fiber advantages
CAMX 2023: herone GmbH is showcasing a set of tubes, shafts and profiles, all of which demonstrate the feasibility of rCF discontinuous fibers molded into complex thermoplastic composite parts.
Read MoreBio-based epoxy, recycled materials increase sustainability of all-terrain snowboards
Aiming for a smaller environmental footprint while maintaining high performance, Salomon’s Highpath snowboard line incorporates bio-based epoxy, glass and basalt fiber stringers and recycled materials.
WatchThermoplastic honeycomb, lightweight solar modules demonstrate sustainability
CAMX 2023: Together, EconCore and ThermHex are providing a first look at new product variations for additional lightweight opportunities, including high-performance thermoplastic cores and solar panels with a honeycomb structure.
Read More