Infusion
Irkut completes final assembly of composite-intensive MS-21-300 aircraft
The MS-21-300 design is approximately 40% composite, which Irkut says is a record figure for medium-range aircraft. After switching to local production, the first aircraft is about to fly.
Read More
DITF develops textile sensors for composites
German Institutes of Textile and Fiber Research are advancing large-area sensors that can detect deformations and stress using printing onto textiles which are then incorporated into composite structures.
Read More
All-electric motor boat tests the waters for recycled carbon fiber
RS Sailing aimed to create a fully electric, rigid inflatable boat (RIB) that is produced as sustainably as possible. A few iterations later, the Pulse 63 is ready to hit the water.
Read More
Composite ring frame improves safety, cost for workhorse helicopter
Airbus Helicopters replaces aluminum primary structure with CFRP using multi-piece preform and single-shot infusion.
Read More
Clean Sky 2 FUSINBUL project develops full-scale, carbon fiber pressure bulkheads
Two 3.5-meter pressure bulkhead demonstrators incorporate advanced layup techniques with the goal of increasing serial production capabilities for fuselage manufacture for regional aircraft.
Watch
Brazil-based Gatron manufactures fiberglass composite deflectors for concept truck
Five deflectors in total combine a sinuous, aerodynamic design, high strength and low weight.
Read More
Designing for automated composites manufacturing of low-volume aerostructures
The commercial aerospace industry is heavily focused on design for efficient high-rate manufacturing, but there is still need for automated, affordable fabrication of low-rate aerostructures.
Read More
Tech Table: Vacuum bagging supplies
This is the fifth in a series of Tech Tables and comprises vacuum bagging material data provided by suppliers.
Read More
Sicomin infuses Couach's superyacht with bio-based epoxy resin
Sicomin’s InfuGreen 810 was used to vacuum infuse Couach’s 26-meter, 52-ton superyacht’s hull, deck and superstructure, for a lighter, faster, more durable yacht.
Read More
Refrigerated railcar floor expands composites horizons
TrinityRail, in an effort to update a 20-year-old design, seizes the opportunity to apply composites in a structural application in its refrigerated railcar. It’s a first for the rail and composites industry.
Read More
