Connecting the composites industry

All Topics See All

Additive Manufacturing

Adhesives

Advanced Air Mobility

Aerospace

Application

ATL/AFP

Autoclave

Automation

Automotive

Biomaterials

BMI

Bonding

Braiding

CAMX

Carbon Fibers

Ceramic Matrix Composites

Coatings

Composites 4.0

Composites Basics

Compression Molding

Construction

Consumer

Core

Curing

Custom Content

Cutting/Kitting

CW Top Shops

CW Trending

Cyanate Ester

Defense

Design & Tooling

Design and Testing

Design/Simulation

Digital Demos

Digitization

Economics

Editorial

Electric Vehicles

Electronics

Epoxies

Fabrics/Preforms

Fastening

Feature

Filament Winding

Finishing & Fastening

Focus on Design

FRP Rebar

Glass Fibers

Global Composites

Graphene

Hi-Temp Resins

Hydrogen Storage

IACMI

Infrastructure

Infusion

Injection/Overmolding

Inside Manufacturing

JEC

Job Postings

Ketones

Lifecycle Analysis

Machining/Drilling

Marine

Market Outlook

Markets

Mass Transit

Materials

Materials Testing

Medical

Molds/Tools

Nanomaterials

National Composites Week

Natural Fibers

NDT

Out of Autoclave

PAEK

Past, Present and Future

PEEK

PEKK

Plant Tours

Post Cure

Predicting Failure

Prepregs

Pressure Vessels

Processes

Pultrusion

Recycling

Reinforcements

Repair

Resins

RTM

Sensors

Sheet Molding Compound

SHM

Space

Startups & Investors

Sustainability

Thermoplastics

Trends

Troubleshooter

Weaving

Welding

Wind/Energy

Work In Progress

Workforce Development
Markets See All

25 Feb 2026 Advanced Air Mobility
Archer selects Bristol as home of UK Engineering Hub
The U.K. engineering hub will support some of the company’s engineering initiatives in commercial and defense sectors.

20 Feb 2026 Carbon Fibers
Automated, integrated Engel production cell proves short cycle time TPC rotor blade production
JEC World 2026: Engel production solutions like its tie-bar-less injection molding unit demonstrates economical series manufacturing of high-grade TPC products for UAM and beyond.

19 Feb 2026 Aerospace
MTorres, Airbus enable next-gen composites via thin-ply AFP
Redesigned hardware and optimized CAM software enable precise, defect-free, thin-ply laminates in closed/complex geometries for even lighter, more efficient pressure vessels and other high-performance composite structures.

18 Feb 2026 Advanced Air Mobility
North Aircraft Industries is manufacturing the Cavorite X7 VTOL composite wings
Horizon Aircraft selects the Canadian company for its proven complex aerocomposite engineering, manufacturing and testing expertise.

18 Feb 2026 Pressure Vessels
Hexagon Agility, Processkontroll Green Technology mark 6,000th composite cylinder milestone
From bus fleets to biomethane stations, Hexagon Agility’s carbon fiber cylinders — 80% lighter than steel and able to hold twice the gas — have been advancing Norway, Sweden and Finland’s drive to clean energy for the last 17 years.

16 Feb 2026 Pressure Vessels
CIMC-Hexagon rolls out Type 4 hydrogen multi-element gas container
Milestone in high-pressure hydrogen storage and transport fills a domestic gap in China, with goals to eventually expand into regional Asian markets.
Design & Tooling See All

25 Feb 2026 Work In Progress
Kaneka BMI material attains >25% lead time, >20% tool cost reductions in Janicki evaluations
Process evaluations find that novel BMI polymer chemistry addresses longstanding manufacturing challenges of BMI tooling prepregs while maintaining high temperature performance and durability.

23 Feb 2026 Defense
Made Smarter funding supports AFD Systems digital enhancements for expertise growth
3D scanning metrology systems, amongst other ongoing investments, help enhance AFD’s support polymer and composites aerospace engineering, enter new markets and scale operations with a growing skilled workforce.

23 Feb 2026 Molds/Tools
Cannon Group R&D improves precise composite mold temperature control
With an approach based on the intrinsic properties of composite materials, the resulting Nexus system saves 70% energy compared to standard heating practices and heat ramp-up time reduced by 80%.

23 Feb 2026 Materials Testing
Instron demonstrate impact, fatigue and static testing systems
JEC World 2026: Live composites demonstrations and a tour of WaveMatrix3 testing software gives attendees real-time visibility to Instron’s testing environment.

23 Feb 2026 Work In Progress
Sentherm conductive polymers match aluminum thermal performance, cut weight
Tailored filler networks, anisotropic material design and manufacturing process control achieve hybrid polymers for EVs, batteries and other automotive-related electronics with 95% of aluminum’s thermal performance and 25-45% reduced component weight.

16 Feb 2026 Molds/Tools
Fibreglass Victoria hits milestone in automotive mold project
SNAPSHOT: Australian custom molder unveils successful fiberglass composite mold sections for a Mercedes-Benz 300SL Gullwing replica, emphasizing its precision and quality in composite builds.
Materials See All

27 Feb 2026 Thermoplastics
TeXtreme | Oxeon AB Wide Spread Tow UD Tapes achieve thinner laminates, direct integration
JEC World 2026: Learn more about the company’s UD tape technology that produces thinner laminates, achieves enhanced mechanical performance and simplifies UD production using existing infrastructure.

27 Feb 2026 Automotive
FibreCoat unveils EV battery case featuring AluCoat aluminum-coated fibers
JEC World 2026: FibreCoat and partners Coleitec and Forward Engineering display an HP-RTM-processed prototype that successfully validates industrial readiness.

27 Feb 2026 Consumer
Plant tour: Haddy, St. Petersburg, Fla., U.S.
The first LFAM microfactory using composites transforms supply chains, enables local manufacturing and circularity across industries.

26 Feb 2026 Biomaterials
ZAG UBAC 95 touring ski goes bio-based with Sicomin SR GreenPoxy80
Collaborating with Sicomin since 2015, ZAG Ski’s progressive redesigns have resulted in a prototype product that features 80% bio-based content and is compatible with industrial production.

26 Feb 2026 JEC
Johns Manville Engineered Products spotlights fiberglass, nonwoven solutions
JEC World 2026: Visitors are invited to stop by the booth, connect with the JM team and participate in technical discussions in the familiar setting of the JM Sports Bar in Paris.

26 Feb 2026 Fabrics/Preforms
Saertex expands distribution network in Turkey with Neva Composites
Stronger market presence will enable technical advice, short response times and a reliable local supply of Saertex multiaxial fabrics and customized materials.
Processes See All

27 Feb 2026 Marine
Caracol demonstrates how robotic LFAM is shaping global mobility applications
JEC World 2026: Caracol is hosting a panel discussion on composites manufacturing for the mobility industry and displaying projects designed for trains, racing cars and yachts.

27 Feb 2026 JEC
FibreCoat unveils EV battery case featuring AluCoat aluminum-coated fibers
JEC World 2026: FibreCoat and partners Coleitec and Forward Engineering display an HP-RTM-processed prototype that successfully validates industrial readiness.

27 Feb 2026 Additive Manufacturing
Plant tour: Haddy, St. Petersburg, Fla., U.S.
The first LFAM microfactory using composites transforms supply chains, enables local manufacturing and circularity across industries.

25 Feb 2026 Compression Molding
Double-belt press process supports natural fiber impregnation in VIBRIO project
AZL Aachen implements vibration in double-belt press processes for bike saddle shell production, enhancing impregnation and boosting NFRP bending strength from 145 MPa to 484 MPa.

25 Feb 2026 JEC
Belotti, Moi Composites launch hybrid additive/subtractive manufacturing centers for thermoset composites
Printing of rigid, thermoset composites with up to 45% fiber can be paused and restarted or added to functionalize prebuilt surfaces and are easily machined with full range of Belotti CNC centers, including as a retrofit option.

24 Feb 2026 Additive Manufacturing
Enabling thermoplastic composites with towpreg tailored for automation
As Suprem SA prepares for its 40th year in TPC materials and entry into the U.S. aerospace market, CW learns more about this company renowned for quality and its vision to deliver new products.
Composites 101 See All

17 Dec 2025 Market Outlook
Composites end markets: Industrial (2026)
Composites solve performance, weight, durability challenges and more in a variety of industrial applications. Recent notable examples include fire truck pumps, biogas reactor tanks and shipping pallets.

11 Nov 2025 Composites Basics
Thermoplastic composite fabrication: Thermal processing
Establish a proper thermal cycle during TPC rapid forming and achieve reproducible, successful parts through key material selection and process method understanding.

8 Oct 2025 Pressure Vessels
Composites end markets: Pressure vessels (2025)
H2 economy is set back by Trump policies, tariffs and funding pivot to defense and AI, but composite tanks remain a key segment with sales in CNG/RNG, growth in New Space and potential for H2-electric aviation.

13 Aug 2025 Infusion
Ceramic matrix composites: Faster, cheaper, higher temperature
New players proliferate, increasing CMC materials and manufacturing capacity, novel processes and automation to meet demand for higher part volumes and performance.

4 Aug 2025 Thermoplastics
Troubleshooting thermoplastic composite stamp forming
Understand the basic science of TPC stamp forming, a manufacturing process steadily gaining momentum in aerospace and mobility applications thanks to its rapid forming, short cycle times and automated methods.

21 Jul 2025 Recycling
Composites end markets: Automotive (2025)
Composites manufacturing intelligence drives circular economy solutions as automotive industry balances technical demands with sustainability mandates.
- Webinars
- Events
- Suppliers
- Whitepapers
Webinars See All

4 Mar 2026
Driving Innovation in Sustainable Manufacturing
As the composite industry shifts toward a circular economy, manufacturers face a dual challenge: integrating nontraditional feedstocks while maintaining high-performance output. This session explores the technical pathways for processing recycled carbon fibers, natural fibers and waste-derived materials using advanced scattering and double-belt press technology. Rather than viewing sustainability as a cost burden, this webinar will examine the "define and refine" methodology—a systematic approach to optimizing material composition and recipe accuracy. Attendees will learn how continuous production cycles reduce energy demand and processing steps compared to traditional batch methods, supported by data-driven insights into carbon dioxide reduction and process repeatability. Agenda Brief introduction to IPCO and overview of 2025/2026 market trends and their significance Innovations and next-generation products: using recycled materials for interior and exterior applications Energy efficiency and process optimization: reducing energy demand and processing steps Versatility and material selection: handling virgin and waste stream feedstock materials Scalability and production reliability: repeatability, recipe accuracy, and energy savings

On Demand
Use of Thermoplastic AFP to Enable Future Electric Aircraft Propulsion
The next generation of aircraft will implement various new propulsion technologies from hybrid engines and hydrogen propulsion to fully electric aircraft. These systems rely on the development of a new class of electric motor that needs to be lightweight and power dense to accommodate the added weight from the new technologies. Trelleborg and GE Aerospace R&D are collaborating in an ARPA-E funded program to develop an innovative, light weight and ultra-efficient electric motor. The use of in-situ fiber placed thermoplastic composites enables a transformational increase in power density. This webinar will highlight the development of a suite of key technologies that will enable future electric aircraft propulsion. Agenda: Introduction to next-generation aircraft propulsion Overview of the ARPA-E ASCEND program and the GE Aerospace eFLITES program Use of thermoplastic fiber placement to enable next-generation electric propulsion Trelleborg capabilities to support composite development

On Demand
Cure with Confidence: Tools and Models for Resin Process Control
The performance of the final product depends heavily on the degree of cure - making it critical to ensure that the reaction goes to completion for the highest quality and reliability. Achieving this requires both a deep understanding of the resin’s curing behavior and precise control of process parameters. Tools such as differential scanning calorimetry (DSC), dielectric analysis (DEA) and oscillatory rheometry provide powerful ways to characterize thermal transitions, cure progression and flow behavior. Each method delivers distinct insights. In this presentation, NETZSCH will discuss when to use DSC, DEA or oscillatory rheometry. These techniques also serve as the basis for kinetics analysis using Kinetics Neo software. Kinetics modeling allows simulation of resin behavior under any time or temperature conditions. This not only enables process optimization and consistent product performance but also helps reduce manufacturing variability and thus scrap rates by predicting and preventing potential processing issues. Agenda: Comparative use of DSC, DEA and oscillatory rheometry in thermoset cure characterization Kinetic modeling approaches for curing processes The role of vitrification as a critical parameter in cure analysis

On Demand
BMI Technologies: Global Solutions for Next-Gen Aerospace Structures
This technical webinar will provide an in-depth overview of Syensqo’s advanced Bismaleimide (BMI) portfolio, including prepregs and adhesives for high-performance aerospace applications. Attendees will learn about the unique properties and processing characteristics of Syensqo's BMI materials, which deliver outstanding thermal performance and mechanical strength. The session will highlight their global manufacturing footprint, non-ITAR product options and ongoing innovation pipeline. This webinar is ideal for engineers, material scientists and technical decision-makers seeking to optimize composite performance in aerospace systems. Agenda: The breadth of Syensqo’s BMI product range, highlighting solutions tailored for diverse aerospace requirements Syensqo's global manufacturing and supply footprint, ensuring consistent quality and availability Non-ITAR BMI products that facilitate international program participation and compliance An overview of our innovation pipeline, including recent developments and next-generation BMI technologies

On Demand
Tool Smarter, Repair Stronger: Kaneka’s Low-temp BMI and Advanced Resin Repair System
Kaneka Aerospace specializes in high-performance composite materials tailored for aerospace and industrial applications. Its portfolio of prepregs, resins and adhesives delivers properties that go beyond lightweight and strength — enabling customers to achieve greater value in manufacturing and sustainability. In this session, Kaneka Aerospace will unveil recent innovations in tooling and structural repair, two critical areas for the economics and longevity of composite structures. Kaneka Aerospace has developed a unique BMI prepreg designed to lower tooling costs while maintaining high performance. Unlike traditional BMI tools that require high-temperature master molds and costly fabrication processes, this prepreg cures first at 250 °F (121 °C) and then undergoes a free-standing post-cure at 400 °F (204 °C). The lower initial cure temperature allows the use of less expensive master molds, while testing demonstrates the carbon fiber reinforced BMI tools’ thermal and dimensional stability under extended use. To further support the composites market’s growth and sustainability goals, Kaneka offers a proprietary repair resin engineered for efficient structural repair. Its low viscosity and balanced mechanical properties ensure effective filling of damage such as delamination and matrix cracks. Comparative testing of repaired versus undamaged composites highlights strong performance across tensile strength, fracture toughness, compression after impact (CAI), and combined loading compression (CLC), showcasing repair as a cost-effective alternative to part replacement.

On Demand
UV Curing for Composite Manufacturing
Ultraviolet energy (UV) curing, also known as energy curing, has been used by the composites industry for some time, but it is still not quite as well-known as some other curing chemistries. The extremely rapid cure speed leads to high throughput and productivity, while the breath of physical properties of the cured resins allow them to be used in a variety of applications. The possibility of making lower VOC/styrene free formulations with very long pot life and reduced waste are also benefits of UV technology. In this presentation, allnex will briefly review what UV curing entails and compare the advantages and challenges of energy curing with thermally curing technologies (for example, peroxide curing of UP resins). In addition to comparing the chemistry of these approaches, we will also look at which composite manufacturing methods best lend themselves to energy curing. We will show some examples of UV curing being used in today’s composites world and where it might go in the future. Finally, this session will review allnex’s line of RAYLOK C products for UV curable composite manufacturing. Agenda: UV technology review Properties of UV cured composites Examples of UV composite technology being used today and possible future uses Review of the allnex RAYLOK C product line

3 Mar 2026 New & Upcoming
Aligned Discontinuous Fibers: Sustainability without Compromising Performance Register Now
Events See All

5 Mar 2026
18th World Pultrusion Conference
The World Pultrusion Conference takes place every two years and is the meeting point of the European and worldwide pultrusion industry. Practical presentations about innovative applications, technologies and processes as well as current market trends and developments are on the agenda. This Conference takes place the week before the JEC World Composites Show (March 10-12, 2026, Paris). The presentation language is English.

10 Mar 2026
JEC World 2026
JEC World gathers the whole value chain of the composite materials industry in Paris (France) every year and is “the place to be” for composites professionals from all over the world. The event brings together not only all major global companies, but also innovative startups in the field of composites and advanced materials, experts, academics, scientists, and R&D leaders. JEC World is also the “festival of composites”, offering a unique showcase of what composites can offer to various application sectors, from aerospace to marine, from construction to automotive, and an unlimited source of inspiration for participants from these industries.

16 Mar 2026
Green Materials 2026
The 3rd International Conference on Materials for a Green Future, widely recognized as the Green Materials Conference 2026, is a materials science conference in Europe dedicated to advancing environmentally responsible materials and technologies.Building on the success of the previous editions held in Thailand, the 2026 gathering continues this international dialogue in the heart of Europe. Hosted in Vienna, Austria, the conference offers a curated platform connecting fundamental science with practical implementation through plenary sessions, keynote talks and focused technical discussions.

17 Mar 2026
PTXPO 2026
PTXPO 2026 is a comprehensive showcase of cutting-edge technologies and innovations within the plastics molding industry. Join fellow molders, moldmakers, brand owners, OEMs and their full suite of suppliers in Rosemont, Illinois, for three days of nonstop networking, education and business development opportunities.

17 Mar 2026
Clean Aviation Annual Forum 2026
This year’s forum focuses on the updated vision for EU aviation, where competitive and clean stand as the core of our strategy to introduce a new generation of aircraft by 2035. However, the transition and shift to cleaner technologies presents significant Research & Innovation challenges from developing disruptive technologies to accelerating their market readiness and uptake. Join the upcoming Clean Aviation Annual Forum, where top policymakers, industry leaders & academic experts will offer valuable insights on Mastering the Shift as we aim to generate insightful debates on expanding the technological scope, aligning funding opportunities at all levels and ensuring high-quality innovative aircraft demonstrations. Additionally, as part of the forum activities the Hardware Hub returns to showcase tangible progress. Be sure to visit the exhibition area featuring posters and hardware from Clean Aviation's ongoing projects.

29 Mar 2026
ASTM D30.10 March 2026 Meeting
Taking place in conjunction with the ACI 440K committee at the ACI Spring Convention.

4 Mar 2026 New & Upcoming
International Seminar on Biopolymers and Sustainable Composites Register Now
Suppliers See All

Additive Manufacturing

Business Development

Cleaning & Pretreatment

Inspection, Testing, Measurement

Manufacturing Execution & Automation Software & Controls

Manufacturing Services

Materials

Pollution Control & Sustainability

Supplies

Temperature/Pressure Control Equipment

Workholding

Get Listed!
Thousands of people visit our Supplier Guide every day to source equipment and materials. Get in front of them with a free company profile.
Request Your Free Listing
Whitepapers See All

10 Jan 2024
Jetcam addresses the economic importance of efficient material nesting
Jetcam’s latest white paper explores the critical aspects of nesting in composites manufacturing, and strategies to balance material efficiency and kitting speed.

8 Jan 2024
Arris Composites demonstrates advantages of natural fibers applied with Additive Molding
Arris presents mechanical testing results of an Arris-designed natural fiber thermoplastic composite in comparison to similarly produced glass and carbon fiber-based materials.

27 Dec 2023
Cevotec white paper presents novel approach for H2 tank production
Cevotec, a tank manufacturer, Roth Composite Machinery and Cikoni, have undertaken a comprehensive project to explore and demonstrate the impact of dome reinforcements using FPP technology for composite tanks.

23 Nov 2023
KCARBON and KIST develop lyocell/PLA/wood biocomposites
Initial demonstration in furniture shows properties two to nine times higher than plywood, OOA molding for uniquely shaped components.

1 Nov 2023
Exel Composites releases guide for design considerations in composite tubes
The composite tubes white paper explores some of the considerations for specifying composite tubes, such as mechanical properties, maintenance requirements and more.

21 Jul 2023
UAMMI white paper addresses composites recycling in Utah
Foundational research discusses the current carbon fiber recycling landscape in Utah, and evaluates potential strategies and policies that could enhance this sustainable practice in the region.
Articles See All

25 Feb 2026 Work In Progress
Kaneka BMI material attains >25% lead time, >20% tool cost reductions in Janicki evaluations
Process evaluations find that novel BMI polymer chemistry addresses longstanding manufacturing challenges of BMI tooling prepregs while maintaining high temperature performance and durability.

24 Feb 2026 Aerospace
Enabling thermoplastic composites with towpreg tailored for automation
As Suprem SA prepares for its 40th year in TPC materials and entry into the U.S. aerospace market, CW learns more about this company renowned for quality and its vision to deliver new products.

23 Feb 2026 Graphene
Sentherm conductive polymers match aluminum thermal performance, cut weight
Tailored filler networks, anisotropic material design and manufacturing process control achieve hybrid polymers for EVs, batteries and other automotive-related electronics with 95% of aluminum’s thermal performance and 25-45% reduced component weight.

20 Feb 2026 Natural Fibers
Polestar 5 takes aesthetics and circularity approach to biocomposite seatback design
The 2026 Polestar 5 expands the company’s use of sustainable materials design in the interior, including flax fiber/thermoplastic seatbacks that save 7 kilograms of weight and reduce overall plastics use.

18 Feb 2026 Aerospace
Carbon fiber redundancy and readiness for defense
Insights into multisite material redundancy and high-rate production for growing military demand through events like Toray’s Industry Tech Days in Alabama.

16 Feb 2026 Composites 4.0
Bonded fastening meets the digital factory
Automation and XR tools aim to scale adhesive fastening for composites at next-gen aerospace production rates.

27 Feb 2026 Marine
Plant tour: Haddy, St. Petersburg, Fla., U.S.
Sustainability See All

26 Feb 2026 JEC
EuCIA promotes the European Circular Composites Alliance, highlights sustainability projects and initiatives
JEC World 2026: Comprising European national composites associations and industry-specific sector groups, the EuCIA is presenting ECCA alliance objectives, participating in various events and is touching on various R&I projects.

25 Feb 2026 Sustainability
Composites sustainability wins: CDP recognition, EcoVadis Gold, site decarbonization
The Daher Group, Gurit, Shawmut Corp. and INEOS continue to strive for environmental transparency, emissions decarbonization and energy reduction.

20 Feb 2026 Sustainability
RECREATE project conference connects industry to viable circular composites
Discuss solutions enabling the circularity of composite materials and their value chains, as well as the market and investment conditions needed for large-scale adoption, on April 23 in Belgium.

20 Feb 2026 Thermoplastics
Polestar 5 takes aesthetics and circularity approach to biocomposite seatback design
The 2026 Polestar 5 expands the company’s use of sustainable materials design in the interior, including flax fiber/thermoplastic seatbacks that save 7 kilograms of weight and reduce overall plastics use.

20 Feb 2026 Carbon Fibers
Teijin Carbon presents sustainability-driven Tenax Next, first customer applications
JEC World 2026: From sustainability targets to process integration and serial production readiness, Teijin is turning low-carbon carbon fiber materials like Tenax Next into customer-ready solutions.

18 Feb 2026 Biomaterials
Nova-Institut reports global bio-based polymer market to rise 11% annually until 2030
Market data forecast indicates that Europe and North America are driving expansion of bio-based polymer and bio-based building block capacity while Asia remains the largest producer.

26 Feb 2026 JEC
ZAG UBAC 95 touring ski goes bio-based with Sicomin SR GreenPoxy80
Knowledge Centers

_

The Now and Next in Composites

CompositesWorld Collections
CW’s editors are tracking the latest trends and developments in tooling, from the basics to new developments. This collection, presented by Composites One, features four recent CW stories that detail a range of tooling technologies, processes and materials.

Sensors for Composite Processing

High-Temp Composites

Sustainability
The composites industry is increasingly recognizing the imperative of sustainability in its operations. As demand for lightweight and durable materials rises across various sectors, such as automotive, aerospace, and construction, there is a growing awareness of the environmental impact associated with traditional composite manufacturing processes.

Automated Composites
In this resource, CGTech offers vital information about the benefits, processes, and vendors behind automated composite manufacturing.

Composites and Carbon Fiber in Hydrogen Storage

View Knowledge Center
CW Tech Days

High-Temp Composites
As defense and space missions push the boundaries of performance, the demand for advanced materials that can endure extreme environments and conditions continues to grow.

Composites in Infrastructure and Construction
CompositesWorld’s CW Tech Days: Infrastructure event offers a series of expert presentations on composite materials, processes and applications that should and will be considered for use in the infrastructure and construction markets.

Composites in Advanced Air Mobility
Explore the cutting-edge composites industry, as experts delve into the materials, tooling, and manufacturing hurdles of meeting the demands of the promising advanced air mobility (AAM) market. Join us at CW Tech Days to unlock the future of efficient composites fabrication operations.

Thermoplastics for Large Structures
Thermoplastics for Large Structures, experts explored the materials and processing technologies that are enabling the transition to large-part manufacturing.

Sustainability in Composites Manufacturing
Explore the technologies, materials, and strategies that can help composites manufacturers become more sustainable.

Design, Simulation and Testing Technologies for Next-Gen Composite Structures
CompositesWorld’s Tech Days: Design, Simulation and Testing Technologies for Next-Gen Composite Structures is designed to provide a multi-perspective view of the state of the art in design, simulation, failure analysis, digital twins, virtual testing and virtual inspection.

New Space Applications
Explore the technologies, materials and strategies used by composites manufacturers working in the evolving space market.

Bonding and Welding
Explore the latest technologies and strategies involving bonding and welding, essential processes in the assembly and manufacturing of composite materials, providing reliable methods for joining components.

Merging Materials and Technologies for Infrastructure and Construction
During this CW Tech Days event, sponsored by Composites One, experts will offer presentations to review and evaluate the composite materials, processes and applications that should and will be considered for use in the infrastructure and construction markets.

Composites in the Hydrogen Economy
In these sessions, experts will discuss the emerging hydrogen economy and the opportunities for composites in this lucrative space.
Collections See All

Composites in Hydrogen Storage
A report on the demand for hydrogen as an energy source and the role composites might play in the transport and storage of hydrogen.

Recycled Composites
This collection features detail the current state of the industry and recent success stories across aerospace, automotive and rail applications.

Thermoplastic Composites
This collection details the basics, challenges, and future of thermoplastic composites technology, with particular emphasis on their use for commercial aerospace primary structures.

Tooling
This collection features recent CW stories that detail a range of tooling technologies, processes and materials.

Source: LAP Laser

AI-Powered Quality Assurance in Laser Projection Processes

May 07, 2025 |

Discover how AI-powered camera systems identify potential issues early on, preventing escalation, reducing rework and minimizing waste.

Presented By

Visit the LAP Laser LLC Showroom

Combining advanced laser projection technology with AI-powered inspection delivers unmatched precision and efficiency. By attending this webinar, you will learn how AI enhances quality control in laser-guided manual composite manufacturing.

Gain insights into detecting foreign objects (FOD) and verifying parts placement with LAP's INSPECT-PRO AI camera system. This system seamlessly integrates with LAP's CAD-PRO laser projection systems to optimize your composite production. Discover how AI-powered camera systems identify potential issues early on, preventing escalation, reducing rework and minimizing waste.

Agenda:

Why AI-powered QA for composite manufacturing?
Black-on-black detection capabilities
Precise placement verification
Instant foreign object detection
Seamless integration with the LAP ecosystem

Presenter 1:

Harald Grimm

Product Manager, LAP

Harald Grimm is the product manager for PRO-SOFT laser projection software at LAP. He is a physicist with more than 20 years of experience in laser projection, starting his career as a software developer. Throughout his extensive experience, Harald has acquired deep knowledge of technology and industry applications, playing a significant role in the complete development of both software and hardware components for the LAP laser projection system.

Presenter 2:

Marie Hooper

Sales Manager, LAP

Marie Hooper started her career with LAP in 2006. As a sales manager for CAD-PRO laser projection systems, she is responsible for worldwide sales activities in the aerospace and wind energy industries. This long-term expertise has given her in-depth know-how in laser projection system applications in these fields. Marie holds a master’s degree in international sales management.

All content on this page is provided by the presenting company.

ACMA's Thermoplastic Composites Conference

Thermwood LSAM Elevate Precision Beyond Scale