Materials Testing
AIMS Metrology introduces coordinate measurement machine for large parts inspection
Suited for composites applications in a range of industries, the Summit is engineered with a 5-axis scanning probe, REVO-2 sensors and options for automation.
Read MoreTU Delft, KLM's Flying-V aircraft performs successful maiden flight
With the V-shaped long-haul aircraft’s successful maiden flight underway, next steps include using the data collected during the flight to develop an aerodynamic model.
Read MoreUsing nondestructive testing to inspect, repair carbon fiber bicycles
An Oregon-based bicycle inspection and repair shop uses an Olympus ultrasonic thickness gage to evaluate and fix structural damage.
Read MoreAll-composite EV wheel moves to next development phase
U.K. consortium partners’ ACRIM II project aims to develop a low-cost, lightweight, all-composite wheel for electric vehicle applications.
Read MoreBreakThru Technology reduces free formaldehyde in phenolic resins
The technology reduces free formaldehyde in phenolic fiber-reinforced plastic (FRP) resins to below 1000ppm (less than 0.1%).
Read MoreAeroFurnace consortium develops composite thermal insulation
According to consortium partners, SGL Carbon, ZAE Bayern and FCT Systeme, up to 40% of the required process energy for high-temperature furnaces can be saved.
Read MoreMS-21 begins engine water protection tests
The test is meant to confirm that water does not disrupt any of the MS-21’s existing systems, equipment or structural elements.
Read MoreSino Polymer develops high-performance epoxy resin systems for prepreg applications
The one-component carbon fiber prepreg can be cured at 150ºC for 10 minutes, is suitable for structural parts requiring Tg within 120-140ºC and can be stored for up to 18 months at -18ºC
Read MoreNASA announces new James Webb Space Telescope target launch date
The observatory is expected to launch Oct. 31, 2021, a change resulting from technical challenges and the impact of the pandemic.
Read MoreTPRC investigates AFP in-situ consolidation alternative
The two-step process involves deposition of thermoplastic prepreg via AFP, followed by vacuum-bag-only (VBO). Research has already been completed in the qualitative stage.
Read More