German railway bridge suspended on CFRP hangers
The 72 CFRP hangers on the 127-meter-long railway bridge met installation, mass and sustainability goals.
Source | Teijin
The Stuttgart Stadtbahn bridge, installed over the A8 motorway on May 3 in Germany, is the world's first network arch bridge that hangs entirely on tension elements made of carbon fiber-reinforced plastic (CFRP). The 72 hangers are produced with Teijin (Wuppertal, Germany) carbon fiber, Tenax, by Carbo-Link AG (Fehraltorf, Switzerland), and differs from the original plan for a conventional steel- bridge.
Source | Teijin
In the end, CFRP cables had more advantages than steel. The carbon fiber cables were cheaper, enabled the crossing of the eight freeway lanes without supporting pillars and ideally fulfilled the requirements for hangers of network arch bridges: the cross-sectional area of the CFRP cables was only a quarter compared to the steel solution. Further, due to their light weight, the 72 CFRP tension elements could be installed without a crane and with only three construction workers.
Incorporation of CFRP in the 127-meter-long railway bridge also pioneers sustainability. The EMPA (Federal Material Testing and Research Institute, Switzerland) proved that CO2 emissions during the carbon fiber manufacturing are one-third of steel, and the energy consumption is more than halved.
Teijin is accelerating the development of applications for carbon fiber in the architecture and construction industries, and intends to further strengthen its position as the world's leading provider of cost-effective and sustainable composite solutions. Dr. Bernd Wohlmann, president of Teijin Carbon Europe GmbH says, “The Stuttgart railway bridge as the first network arch bridge solely made of CFRP cables should be groundbreaking for other bridges and constructions comprising CFRP. We are only at the beginning of manifold possibilities."
Related Content
-
Infinite Composites: Type V tanks for space, hydrogen, automotive and more
After a decade of proving its linerless, weight-saving composite tanks with NASA and more than 30 aerospace companies, this CryoSphere pioneer is scaling for growth in commercial space and sustainable transportation on Earth.
-
Plant tour: Joby Aviation, Marina, Calif., U.S.
As the advanced air mobility market begins to take shape, market leader Joby Aviation works to industrialize composites manufacturing for its first-generation, composites-intensive, all-electric air taxi.
-
Cryo-compressed hydrogen, the best solution for storage and refueling stations?
Cryomotive’s CRYOGAS solution claims the highest storage density, lowest refueling cost and widest operating range without H2 losses while using one-fifth the carbon fiber required in compressed gas tanks.