Carbon fiber suppliers gear up for next-gen growth
CompositesWorld’s annual Carbon Fiber conference was held in Knoxville, Tenn., U.S., in late 2019 and included a pre-conference seminar focused on carbon fiber supply and demand.
CompositesWorld’s annual Carbon Fiber conference was held in Knoxville, Tenn., U.S., in late 2019 and included a pre-conference seminar focused on carbon fiber supply and demand, presented by Tony Roberts, a longtime composites industry veteran and proprietor of AJR Consultancy.
Roberts spoke to a packed conference room of attendees eager for a snapshot of the state of carbon fiber manufacturing. This eagerness stems from the fact that carbon fiber manufacturers tend to hold carbon fiber capacity information very closely, thus it’s difficult to develop hard-and-fast figures. Roberts acknowledged as much in his presentation, and provided capacity estimates from other analysts to give his report context. That said, what follows is a summary of Roberts’ own data.
The accompanying tables summarize the supply and demand picture. On the supply side, there was 161,200 metric tonnes of global carbon fiber nameplate capacity in 2019. Toray (Tokyo, Japan) dominates the carbon fiber supply chain with 57,000 metric tonnes of annual capacity, which nearly equals the capacity of the next four largest suppliers combined.
Carbon fiber supply, nameplate, metric tonnes
Manufacturer | Headquarters | 2019 |
---|---|---|
Toray | Japan | 57,000 |
Hexcel | U.S. | 16,000 |
Mitsubishi Chemical Carbon Fiber & Composites | U.S. | 16,000 |
Teijin | Japan | 14,000 |
SGL Carbon | Germany | 13,000 |
Formosa Plastics | Taiwan | 9,000 |
Solvay Composite Materials | U.S. | 4,400 |
DowAksa | U.S. | 3,000 |
Hyosung | South Korea | 2,000 |
Various | China | 21,800 |
Various | Rest of World | 5,000 |
Total | 161,200 |
In 2020, Roberts said to expect capacity expansion for Hyosung (Seoul, South Korea), which is adding 2,000 metric tonnes in Korea; Teijin (Tokyo, Japan), which is adding 2,200 metric tonnes in the U.S.; and Toray, which is adding 2,000-3,000 metric tonnes in the U.S. and Mexico. By the end of 2020, Roberts says, expect global nameplate carbon fiber capacity to be 172,000 metric tonnes.
Carbon fiber manufacturing in China is slowly maturing, with the largest suppliers there each with capacity of less than 10,000 metric tonnes. The five largest are Zhongfu Shenying Carbon Fiber (Lianyungang City, China), Hengshen (Danyang City, China), Jinggong Science & Technology (Shaoxing City, China), Weihai Guangwei Composite Materials (Weihai City, China) and Kangdexin Composite Material Group (Changping, China). Almost all, said Roberts, have expansion plans, but the most aggressive appears to be Kangdexin, which is said to be working toward an ultimate goal of almost 70,000 metric tonnes capacity.
The global demand for carbon fiber is complicated, mainly because it is offered in such variety — size (tow counts) and mechanical capability (strength, stiffness) — that making sense of the data requires a closer look at the end markets that use carbon fiber. That said, Roberts reported, 2019 saw total global carbon fiber demand of 123,300 metric tonnes, with the bulk of that, 85,000 metric tonnes, coming from the industrial segment, which includes wind energy, automotive, pressure vessels and infrastructure. Aerospace, which consumes the highest quality carbon fiber, accounted for 24,500 metric tonnes; the sports and leisure segment accounted for 13,800 metric tonnes.
Carbon fiber demand, metric tonnes
End market | 2017 | 2020 (est.) | 2025 (est.) |
---|---|---|---|
Aerospace |
24,500 |
30,000 | |
Industrial | 68,000 | 85,000 | 142,350 |
Sports/Leisure | 12,000 | 13,800 | 19,000 |
Total | 98,000 | 123,300 | 191,350 |
Looking ahead, Roberts is particularly bullish about increased carbon fiber demand from wind energy (27,300 metric tonnes in 2025), transportation (22,750 metric tonnes in 2025), infrastructure (20,800 metric tonnes in 2025) and pressure vessels (19,500 metric tonnes in 2015). Roberts expects the aerospace end market to demand 30,000 metric tonnes of carbon fiber by 2025, with 15,500 metric tonnes of that going to commercial aircraft. The balance goes to interiors, defense, business jets, general aviation, engines, rotorcraft, unmanned aircraft and munitions.
The upshot is that by 2025, it is estimated that the total carbon fiber demand will be 191,350 metric tonnes. Roberts expects global nameplate carbon fiber demand, by 2025, will be about 201,000 metric tonnes. Accounting for knockdown — the difference between nameplate and actual carbon fiber production — it is conceivable that the industry may see a carbon fiber shortfall in the next five years.
In any case, the carbon fiber supply chain is showing serious signs of maturation. The material, Roberts noted, is now available in almost every industrialized nation in the world.
Related Content
Cryo-compressed hydrogen, the best solution for storage and refueling stations?
Cryomotive’s CRYOGAS solution claims the highest storage density, lowest refueling cost and widest operating range without H2 losses while using one-fifth the carbon fiber required in compressed gas tanks.
Read MoreOne-piece, one-shot, 17-meter wing spar for high-rate aircraft manufacture
GKN Aerospace has spent the last five years developing materials strategies and resin transfer molding (RTM) for an aircraft trailing edge wing spar for the Airbus Wing of Tomorrow program.
Read MoreNovel dry tape for liquid molded composites
MTorres seeks to enable next-gen aircraft and open new markets for composites with low-cost, high-permeability tapes and versatile, high-speed production lines.
Read MoreThe making of carbon fiber
A look at the process by which precursor becomes carbon fiber through a careful (and mostly proprietary) manipulation of temperature and tension.
Read MoreRead Next
Composites end markets: Energy (2024)
Composites are used widely in oil/gas, wind and other renewable energy applications. Despite market challenges, growth potential and innovation for composites continue.
Read MoreFrom the CW Archives: The tale of the thermoplastic cryotank
In 2006, guest columnist Bob Hartunian related the story of his efforts two decades prior, while at McDonnell Douglas, to develop a thermoplastic composite crytank for hydrogen storage. He learned a lot of lessons.
Read MoreCW’s 2024 Top Shops survey offers new approach to benchmarking
Respondents that complete the survey by April 30, 2024, have the chance to be recognized as an honoree.
Read More