Thermoplastics
Salewa's new hiking boot features thermoplastic composites
The Ortles Couloir boot includes thermoplastic composites from Xenia Materials and was designed to offer both stiffness and flexibility.
Read MoreThermoplastic tapes continue to show potential for composite aerostructures
Web Industries reports increased R&D activity within several aerospace markets enabled by the flexibility and advantages of thermoplastic tapes.
Read MoreElectroimpact, Toray, Janicki advance technologies for rapid, large-scale thermoplastic parts manufacture
Project combines Electroimpact high-speed AFP equipment, Janicki’s OOA heated layup tooling system and Toray Cetex TC1225 low melt PAEK UD tape for deposition rates of up to 4,000 inches/minute.
Read MoreClean Sky 2 FRAMES project advances heating simulation of thermoplastic composite AFP with xenon flashlamp
Heraeus Noblelight and Compositadour develop heating simulation to optimize process temperatures during automated fiber placement of composite aerostructures.
Read MoreReactively polymerized resin expands organosheet market, opportunities
Johns Manville to introduce Neomera, a new family of thermoplastic composites.
Read MoreOut-of-autoclave VBO rear spar, thermoplastic ribs target Wing of Tomorrow
French Tier 1 aerospace supplier Daher develops out-of-autoclave materials and process technologies for application in next-gen structures for the Airbus Wing of Tomorrow program.
Read MoreCAMX 2021 exhibit preview: Teubert
Teubert highlights its continuous compression molding (CCM) system for manufacturing fiber-reinforced thermoplastic composites such as plates and profiles.
Read MoreAON3D debuts AON M2+ printer to fabricate high performance end-use parts
Printer aimed to exceed aluminum parts using chopped carbon fiber and high-performance polymers (e.g., PEEK, PEKK, ULTEM) via widely available, off-the-shelf filaments.
Read MoreStratasys, Champion Motorsport team up to test 3D-printed core technology
Stratasys proves out carbon fiber-wrapped, printed core for toolless, customizable manufacture, on aerodynamic prototype and production parts for a winning racecar.
Read MoreOTOMcomposite develops software for Composites 4.0 production using laser-assisted tape placement and winding
Optical thermal optimization model (OTOM) software enables inline monitoring and control for improved part quality and reduced production time and cost of in-situ consolidated thermoplastic composites and Type IV pressure vessels.
Watch