SEICO 1 at a Glance
Monday, April 12Registration 8:00 a.m. to 4:30 p.m.Opening and Keynote Addresses 9:30 a.m. to 10:30 a.m.Introduction: Bruno Beral SAMPE Europe presidentKeynote: Dr.
Monday, April 12
Registration 8:00 a.m. to 4:30 p.m.
Opening and Keynote Addresses 9:30 a.m. to 10:30 a.m.
Introduction: Bruno Beral
SAMPE Europe president
Keynote: Dr. Leslie Cohen
HITCO Carbon Composites
Coffee Break 10:30 a.m. to 11:00 a.m.
SESSION 1 11:00 a.m. to 12:30 p.m.
1A: ALCAS I
1B: Nanotechnology I
1C: Testing I
Lunch 12:30 p.m. to 2:00 p.m.
SESSION 2 2:00 p.m. to 3:30 p.m.
2A: ALCAS II
2B: Blackfibers
2C: Infrastructure I
Coffee Break 3:30 p.m. to 4:00 p.m.
SESSION 3 4:00 p.m. to 5:30 p.m.
3A: Manufacturing I
3B: Joining
3C: Monitoring
SAMPE Europe Conference Dinner 8:00 p.m. to 11:00 p.m.
Tuesday, April 13
Registration 8:00 a.m. to 4:00 p.m.
SESSION 4 9:00 a.m. to 10:30 a.m.
4A: ALCAS III
4B: FST (Fire/Smoke/Toxicity)
4C: Applications I
Coffee Break 10:30 a.m. to 11:00 a.m.
SESSION 5 11:30 a.m. to 1:00 p.m.
5A: Manufacturing II
5B: Nanotechnology II
5C: Thermoplastics Composites
Lunch 12:30 p.m. to 2:00 p.m.
SESSION 6 2:00 p.m. to 3:30 p.m.
6A: Out-of-autoclave Processing
6B: Matrix Resins
6C: Fatigue Behavior
Coffee Break 3:30 p.m. to 4:00 p.m.
SESSION 7 4:00 p.m. to 5:30 p.m.
7A: ALCAS IV
7B: Sandwich Composites
7C: Composite Repair
Wednesday, April 14
Registration 8:00 a.m. to 4:00 p.m.
SESSION 8 9:00 a.m. to 10:30 a.m.
8A: Manufacturing III
8B: ALCAS V
8C: Nanotechnology III
Coffee Break 10:30 a.m. to 11:00 a.m.
SESSION 9 11:00 a.m. to 12:30 p.m.
9A: Panel Session: Automation
9B: Education: Student’s Conference
9C: Nanotechnology IV
Lunch 12:30 p.m. to 2:00 p.m.
SESSION 10 2:00 p.m. to 3:30 p.m.
10A: Testing II
10B: Impact Behavior
10C: Filament Winding
Coffee Break 3:30 p.m. to 4:00 p.m.
SESSION 11 4:00 p.m. to 5:30 p.m.
11A: Infrastructure II
11B: Applications II
11C: Manufacturing IV
Closing Session 5:30 p.m.
Bruno Beral, SAMPE Europe president
Related Content
-
One-piece, one-shot, 17-meter wing spar for high-rate aircraft manufacture
GKN Aerospace has spent the last five years developing materials strategies and resin transfer molding (RTM) for an aircraft trailing edge wing spar for the Airbus Wing of Tomorrow program.
-
Novel composite technology replaces welded joints in tubular structures
The Tree Composites TC-joint replaces traditional welding in jacket foundations for offshore wind turbine generator applications, advancing the world’s quest for fast, sustainable energy deployment.
-
Plant tour: Albany Engineered Composites, Rochester, N.H., U.S.
Efficient, high-quality, well-controlled composites manufacturing at volume is the mantra for this 3D weaving specialist.