Slideshow of SPE ACCE 2015
A look at the 15th edition of SPE’s Automotive Composites Conference & Exhibition (ACCE).
A look at part of the SPE ACCE exhibit hall. The show floor was busy – several exhibitors told me they received a high amount of traffic, even during the technical presentations. (Photo courtesy of SPE).
The very cool BMW i8 with carbon composite life module was prominently displayed in the parts area. Too bad they weren’t offering test drives. (CW/Photo: Heather Caliendo).
Hexion (Columbus, OH, US) showcased this lightweight, CFRP door that was produced by Benteler-SGL (Ried im Innkreis, Austria) for the Porsche 911 GT3 Coupe. The composite was manufactured by HP-RTM using Hexion’s EPIKOTE resin TRAC 06300 and EPIKURE curing agent TRAC 06300. (CW/Photo: Heather Caliendo).
Huntsman (The Woodlands, TX, US) showcased its VITROX resin technology used in the structural carbon fiber honeycomb elements for the production of the chassis of the Zenos E10 sports car. The advanced honeycomb sandwich panel is a collaboration between Huntsman and Bright Lite Structures (Peterborough, UK). (CW/Photo: Heather Caliendo).
Paul Krajewski, director of vehicle systems research laboratory at General Motors Co. (Detroit), speaking during a panel discussion discussing automotive lightweighting targets. He said that one challenge for composites is how to move the “novel application” to the mainstream as the fundamental issue is cost. “We have to look more into the long-term and on how to make it cheaper to get that market to grow.” (Photo courtesy of SPE).
Specialized Bicycle Components used Altair’s CAE software suite HyperWorks to analyze and improve the aerodynamic performance of the bike as well as optimize the weight and structural efficiency of the new S-Works Venge carbon frame. (CW/Photo: Heather Caliendo)
Tom Schmitz, business manager at composites mold making specialist Weber Manufacturing Technologies (Midland, ON, Canada), getting ready for show attendees. (Photo courtesy of SPE).
Here’s the carbon fiber wheels produced for the Ford Shelby GT350R Mustang. The wheels are supplied by Carbon Revolution and the weight of each wheel is cut nearly in half compared to an equivalent aluminum wheel (18 lb vs. 33 lb). (CW/Photo: Heather Caliendo).
Lanxess (Cologne, Germany) showed off this front end module for the Skoda Octavia larger family car that was produced with its Durethan material. The full plastic design features high strength and stiffness. (CW/Photo: Heather Caliendo).
The Multi-Material Lightweight Vehicle (MMLV) is a concept vehicle designed by Ford and Magna under a project funded by the Department of Energy’s Vehicle Technologies Office. It features a new aluminum-intensive passenger-car structure and also makes use of carbon fiber. (CW/Photo: Heather Caliendo).
How did I miss the booth that had candy? (Photo courtesy of SPE).
The 15th edition of SPE's Automotive Composites Conference & Exhibition (ACCE) was its largest event to date. This year’s show, which the theme was Composites: The Next Generation of Lightweighting, returned Sept. 9-11, 2015 to The Diamond Banquet & Conference Center at the Suburban Collection Showplace in Novi, MI in the Detroit area.
There was plenty to see and hear— so here's a sampling of the conference and exhibition.
Related Content
-
Jeep all-composite roof receivers achieve steel performance at low mass
Ultrashort carbon fiber/PPA replaces steel on rooftop brackets to hold Jeep soft tops, hardtops.
-
JEC World 2022, Part 3: Emphasizing emerging markets, thermoplastics and carbon fiber
CW editor-in-chief Jeff Sloan identifies companies exhibiting at JEC World 2022 that are advancing both materials and technologies for the growing AAM, hydrogen, automotive and sustainability markets.
-
3D-printed CFRP tools for serial production of composite landing flaps
GKN Aerospace Munich and CEAD develop printed tooling with short and continuous fiber that reduces cost and increases sustainability for composites production.
