Toray boosts European carbon fiber production capacity
Toray Carbon Fibers Europe S.A. facility in France will increase to an annual production of 6,000 metric tons of medium and high modulus carbon fiber tows.
On Oct. 4, Toray Industries Inc. (Tokyo, Japan), announced the decision to expand French subsidiary Toray Carbon Fibers Europe S.A.’s (Lacq) production facilities for regular tow (up to 24,000 filaments) medium and high modulus carbon fibers. This move will increase annual capacity at the Abidos plant in southwest France from 5,000 metric tons annually to 6,000 metric tons. Production is expected to start in 2025.
Demand for medium and high modulus carbon fibers is rising in Europe, driven by a push to move towards a net-zero society, says Toray. This growth is mainly due to higher build rates for commercial aircrafts (secondary structures and engines), as well as centrifuge for energy production, satellites and high-end automobiles.
Toray reports sustainable growth pivotal to Project AP-G 2025, its medium-term management program. Accordingly, the company has developed solutions to tackle climate change with its carbon fiber composite materials. Toray will fully leverage its resources to help achieve a carbon-neutral economy by 2050, in keeping with its corporate philosophy of contributing to society by creating new value.
For related information, read “Toray Advanced Composites to expand Morgan Hill operations” and “Toray to increase carbon fiber tow capacity by more than 20%.”
Related Content
-
Cryo-compressed hydrogen, the best solution for storage and refueling stations?
Cryomotive’s CRYOGAS solution claims the highest storage density, lowest refueling cost and widest operating range without H2 losses while using one-fifth the carbon fiber required in compressed gas tanks.
-
Novel dry tape for liquid molded composites
MTorres seeks to enable next-gen aircraft and open new markets for composites with low-cost, high-permeability tapes and versatile, high-speed production lines.
-
Materials & Processes: Fibers for composites
The structural properties of composite materials are derived primarily from the fiber reinforcement. Fiber types, their manufacture, their uses and the end-market applications in which they find most use are described.