Arkema, CNRS open France-based lab for UV-curable material exploration
Accelerated photopolymerization research to benefit adhesives, 3D printing, composites, electronics and coatings applications, among others.
Specialty materials company Arkema Inc. (Exton, Pa., U.S.) recently announced a partnership with the French National Center for Scientific Research (CNRS, Paris, France) and the Université de Haute-Alsace (Brunstatt-Didenheim) to inaugurate a new lab at the Mulhouse Institute of Materials Science (IS2M).
This lab will help accelerate research into photopolymerization, a future-oriented technology that improves energy savings and doesn’t require the use of solvents, and explore new and more sustainable UV-curable materials.
“Our goal is to design more sustainable specialty photopolymer materials for applications such as adhesives, 3D printing, composites, electronics and coatings, focusing on new market developments like new energies, clean mobility, home efficiency and lightweight materials,” Laurent Peyronneau, vice president at Arkema Coating Additives, says. “This initiative will support us to offer better sustainability throughout the value chain.”
Arkema has a long history of designing and marketing specialty materials for photopolymerization, through its flagship Sartomer product line, and custom formulations for 3D printing, through its N3xtDimension product line — for example, its partnership with Continuous Composites. UV-curable specialties are one of Arkema key low volatile organic compound (VOC) technologies, together with waterborne, high solid and powder.
For other related content, be sure to take a look at:
- “UV-curing grows composites market share”
- “Applying UV-curable powder coatings to composites”
- “Easy-to-use kits enable infield repair of composite structures”
Related Content
-
A new era for ceramic matrix composites
CMC is expanding, with new fiber production in Europe, faster processes and higher temperature materials enabling applications for industry, hypersonics and New Space.
-
Large-format 3D printing enables toolless, rapid production for AUVs
Dive Technologies started by 3D printing prototypes of its composite autonomous underwater vehicles, but AM became the solution for customizable, toolless production.
-
Manufacturing the MFFD thermoplastic composite fuselage
Demonstrator’s upper, lower shells and assembly prove materials and new processes for lighter, cheaper and more sustainable high-rate future aircraft.