Composites 4.0
IMDEA introduces digital twin for real-time analysis of composite materials production
Newly designed digital twin by IMDEA and Technical University of Madrid researchers enables manufacturers to see inside composite materials as they are being produced, facilitating early detection of faults.
Read MorePlataine expands NCC's AI, IoT optimization capabilities
Under this partnership, the NCC will leverage technologies such as time-sensitive material management and Plataine’s Digital Twin to further develop its composites R&D.
Read MorePlant tour: Sekisui Aerospace, Orange City, Iowa, Renton and Sumner, Wash., U.S.
Veteran composites sites use kaizen and innovation culture to expand thermoplastic serial production, 4.0 digitization and new technology for diversified new markets.
Read MoreFIBRE4YARDS incorporates next-gen composites technologies to redefine shipbuilding
At the project’s completion, consortium members have unveiled final results and a 1:1 scale demonstrator, highlighting the opportunities for more collaborative, digitized, automated, efficient and environmentally friendly shipyards.
Read MorePlataine releases enhanced version of Digital Thread Portal
The cloud solution delivers digital thread connectivity across multiple sites and organizations, enabling manufacturers to automate material receiving and maintain a complete digital genealogy of their products.
Read MoreGMI Aero enhances digital/physical twin network application for Anita hot bonder
EVOLVED-5G project seeks to test, validate and certify, in a vendor-agnostic experimentation 5G platform, Industry 4.0 network applications.
Read More
Global aerospace manufacture uses sensXPERT to shorten cycle times, meet increased rate and reduce waste
Using minimal sensors and one edge device, data from 20 production cycles was used to train machine learning models, accurately predicting outcomes in ≤50 minutes by forecasting when target degree of cure is reached.
Read MoreAerospace manufacturer implements Plataine AI solution
Automation of composite material receiving, thawing and flow throughout the production process resulted in improved quality, increased capacity and cost savings.
Read MoreNew Frontier Technologies launches digital twinning, high-fidelity simulation capability
3D imaging and analysis capability illustrates detailed, quality characterization and performance simulation of composites and other advanced materials that properly captures the as-manufactured component.
Read MoreCTC commissions Carbon Axis XCell machine for LaiLa project
The XCell AFP machine is being used to investigate innovative fiber deposition concepts and improve lightweight production via Industry 4.0.
Read MoreFives introduces COAST in-process composite inspection technology
COAST is capable of precise measurement and defect detection on contoured composite surfaces during the AFP process, reducing costs and increasing AFP accessibility.
Read MoreMachina Labs secures $32 million to advance AI manufacturing for metals, composites
Latest funds will accelerate research initiatives and meet growing customer demand.
Read More
Cevotec Samba Pro installed in Fraunhofer IGCV AI research hall
Prepreg system is available to companies interested in exploring research in digitalization and AI for composites manufacture or to evaluate FPP-designed components.
Read MoreNext-gen composites manufacturing: Combining material, machine and mold cavity data with analytics
Using a sensor, an edge device and machine learning software, sensXPERT sees into processes and is improving quality and cutting scrap, cycle time and energy use for composites customers like ZF and Carbon Revolution.
Read MorePlataine publishes composite industry survey results
Survey findings provide insight from industry players as they navigate global manufacturing challenges and uncertainties, and sustainability and digitalization implementation.
Read MoreDLR develops safe, flexible workspaces for robot-assisted manual draping
The EU project Drapebot works on new ways of collaborating with industrial robots for manual CFRP preforming for large aircraft structural parts.
Read MoreNIAR seeks industry experts for new digital twins study
Advanced Robotics for Manufacturing (ARM) Institute is seeking representatives to assess technology gaps related to virtual commissioning and creation of digital twins.
Read MoreThermal processing workflow software effectively monitors composite processing equipment
CAMX 2023: State-of-the-art, user-friendly PCS 2.0 showcased by Walton Process Technologies is an Industry 4.0 process control software for autoclaves, presses and ovens.
Read More
Renishaw presents smart manufacturing data platform for industrial process control
Renishaw Central collects, presents and initiates accurate process and metrology data to optimize processes, reduce downtime and minimize waste.
Read MoreModular, robotic cells enable high-rate RTM using any material format
Airborne’s automated ply placement systems at Airbus, GKN Aerospace and Teijin Automotive Technologies aim to maximize flexibility and intelligent automation.
Read MoreIntelligent mobility concepts support e-mobility
CAMX 2023: Materials, process and automation solutions from Dieffenbacher enable Industry 4.0, high output, optimized quality and reproducible composites manufacturing.
Read MoreAerospace manufacturer meets increased demand with Plataine
Plataine’s AI-based solution, incorporated into the composite aerostructure manufacturer’s cutting and kitting operations, increased production throughput, material use, improved quality and reduced errors.
Read MoreAI-based production scheduling and IIoT increase productivity
CAMX 2023: Plataine’s Production Scheduler is an intelligent and intuitive solution that combines advanced tools and algorithms for a dynamic production planning approach.
Read MoreTPRC brings composites expertise to NxtGen HighTech program
Newly launched program in the Netherlands will run until 2030 with more than 330 partners contributing knowledge to advancing high-tech solutions, including additional research in composites welding, recycling and AFP.
Read More
.jpg;maxWidth=300;quality=90;format=webp)
