Epoxy

Exploring the: Epoxy Zone

48 Results for: Blog

Sort by:
Published: 7/9/2018

It’s time to plan your Wisconsin trip: Oshkosh 2018 is coming
The annual EAA AirVenture event is an air show/aircraft exhibition/trade show/learning opportunity/history lesson/concert venue/giant campout/Wisconsin bratfest and more. As in past years, composites industry expert and CW contributor Russ Eman...

Published: 6/29/2018

Generative design and continuous 3D fiber deposition
Generative design replicates nature’s evolutionary approach by combining artificial intelligence (AI) and cloud computing to provide thousands of solutions to one engineering problem.

Published: 6/28/2018

Composites Pavilion at AIA 2018
New composite products for architecture/construction and student designs innovate how composites can be used.

Published: 5/28/2018

This foiling racer is crazy fast thanks to composites
The Exocet racer’s hull and its foils, designed via computer model, are fabricated using hand layup and resin infusion methods, respectively, with PRO-SET epoxy.

Published: 4/23/2018

Flexible cure prepreg finds use in marine and wind
It’s almost time for the 2018 Tour de France — no, not that one with the bicycles, but the Tour de France à la Voile. Hexcel (Stamford, CT, US) composite materials have been used for the race’s trimaran the DIAM 24...

Published: 3/27/2018

Carbon fiber/epoxy in production boats
Scout Boats and now Hinckley Yachts showcase how demand for lighter, faster performance pushes materials and process change.

Published: 3/23/2018

Automated Preforming: Coriolis Composites
Pioneer in automated fiber placement (AFP) advances preforms for overmolded thermoplastic composites enabling production of one automotive part every 20 seconds.

Published: 3/7/2018

Five highlights from JEC World 2018
It’s not Spring without a trip to Paris, France for the JEC World 2018 composites conference. It’s become a very big show, and thus, offers some big announcements and some developing trends.

Published: 3/1/2018

NanoStitch update: 60-inch wide sheet, industrial capacity, dramatic test results
N12 Technologies adds second facility in Boston and capacity at UDRI in Ohio while amassing knowledge to prevent microcracking and delamination in applications from sporting goods to aerospace.

Published: 2/28/2018

iComposite 4.0 — cutting composites cost by 50%
An intelligent, integrated process using 3D fiber spraying, inline inspections/simulation and embedded RFID chips to cut scrap and rejections for structural HP-RTM epoxy parts.