Zyvex Technologies Inc.

Creates high-performance, nano-enhanced composite materials. Designs and builds advanced molecules for improved mechanical properties in composites. Makes prepregs, epoxies, resin and adhesives enhanced with carbon nanotubes and graphene for unmatched strength and performance.

1255 Kinnear Rd., Ste. 100
Columbus, OH 43212-1155 US

Connect

As Seen In CompositesWorld

Graphene and CNTs: Commercialization after the hype
Graphene and CNT applications within the advanced composites sector are still at a relatively early stage of the commercialization process, but as the availability of materials or dispersions of consistent quality has increased, a number of composite materials and components are starting to incorporate these nanomaterials.

CW Ideas in Action
Ideas are just ideas until someone does the hard work of putting them into action and seeing results. CW's editors, therefore, inaugurate an annual review of Ideas in Action, celebrating a handful of hot concepts that could make those who conceived them "household names."

Zyvex nano-based toughener offers increased ease of use
Zyvex Technologies has launched ZNT-boost, an epoxy-composite toughening system based on carbon nanotubes (CNTs) for carbon and glass fiber composites.

Polymer modified carbon nanotube additive
Zyvex Technologies has launched a new product family called ZNT (Zyvex nanotube technology), a polymer modified carbon nanotube additive for a range of host matrices that includes epoxies, elastomers, thermoplastics and aqueous-based solutions.

Carbon Fiber 2013 Conference Report
Opportunities knock in Knoxville: CF 2013 featured nearly 30 speakers and almost 300 attendees, representing a wide range of participating industry, government and academic organizations.

SAMPE 2010 Seattle Showcase
SAMPE’s first-ever foray into Boeing Country wrapped up with the M&P organization’s biggest draw this decade.

SAMPE 2010 Seattle Preview
New decade, new venue, new economy, new M&P opportunities.

Composites 2010 Product Showcase
The ACMA’s Las Vegas exhibition reflected an industry in recovery.

CNTs ride a rising tide of nanotech optimism
Dr. Louis Pilato offers facts, figures and comment on the growing utility of carbon nanotechnologies in composites applications.

Anti-agglomeration (bad)

The key to CNTs: Functionalization
An emerging supply base is integrating carbon nanotubes into commercial products that enable composites manufacturers to optimize part performance.

Isotruss bicycle

SAMPE 2009 Product Showcase
Showgoers at the SAMPE 2009 Conference and Exhibiton in Baltimore, Md. found many suppliers undeterred by poor economic news. 

Nanotech 2004: Progress toward commercialization
The Nanotech 2004 conference in Boston unites many disciplines.

Product Categories of Zyvex Technologies Inc.

Materials
  • Matrix resins, thermoset
    • Bismaleimide (BMI)
    • Phenolic
    • Polyimide
    • Other thermosets
  • Prepregs, thermoset
    • Epoxy, 250 F cure
      • Epoxy, 250 F cure, <12K tow
      • Epoxy, 250 F cure, >12K tow
      • Epoxy, 250 F cure, 6-inch tape
      • Epoxy, 250 F cure, 12-inch tape
      • Epoxy, 250 F cure, Fabric
      • Epoxy, 250 F cure, Mat
      • Epoxy, 250 F cure, Other broadgoods
    • Epoxy, 350 F cure
      • Epoxy, 350 F cure, <12K tow
      • Epoxy, 350 F cure, >12K tow
      • Epoxy, 350 F cure, 12-inch tape
      • Epoxy, 350 F cure, Other tape
      • Epoxy, 350 F cure, Fabric
      • Epoxy, 350 F cure, Other broadgoods
    • Epoxy, toughened
      • Epoxy, toughened, <12K tow
      • Epoxy, toughened, >12K tow
      • Epoxy, toughened, 12-inch tape
      • Epoxy, toughened, Fabric
      • Epoxy, toughened, Other broadgoods
    • Other
      • Other, 12-inch tape
  • Adhesives
    • Epoxy
      • Epoxy, Film
      • Epoxy, Paste