Wisconsin Oven Corp.

2675 Main St.
PO Box 873
East Troy , WI 53120 US

Connect


Wisconsin Oven Ships Two Curing Ovens to a Manufacturer of Water Filtration Products

Published Date: 
Tuesday, December 27, 2016

Wisconsin Oven Corporation shipped two (2) electrically heated combination airflow ovens to a manufacturer of water filtration products. The industrial ovens will be a mirror of each other, and be used to cure epoxy on water element (filters). The curing ovens will utilize a conveyor system to move the product through the ovens.

The conveyor ovens have maximum temperature ratings of 200°F and heating chamber dimensions of 6’ W x 20’ L x 8’ H. The customer required guaranteed temperature uniformity of ±10°F at 120°F & 140°F, which was documented in a standard nine (9) point profile test. There are three (3) 46” wide x 20” high profile openings provided at each end of the oven. The equipment also features six (6) 23” wide x 10” high viewing windows (3 per side and staggered) and two (2) interior lights.

The recirculation system utilizes combination airflow with two (2) 6,000 CFM @ 7.5 HP direct driven blowers. The combination airflow provides both horizontal and vertical upward airflow, maximizing the heating rates and temperature uniformity of the product. The curing oven is constructed with tongue and groove panel assemblies featuring Wisconsin Oven’s patented high efficiency panel seams that provide 25% better insulating efficiency.

 “In addition to the low maintenance direct drive blower that have no drive belts to maintain, this equipment was designed with several access points. Both of these design features allow for ease of maintenance for our customer.”- Tom Trueman, Senior Application Engineer

Unique features of these industrial ovens include:

  • Guaranteed temperature uniformity of ±10°F at 120°F & 140°F
  • Tongue and groove panel assemblies featuring Wisconsin Oven’s patented high efficiency panel seams
  • UL certified and labeled NEMA 12 enclosure
  • SSR power control
  • Programmable temperature controller and high limit controller

The curing ovens were fully factory tested and adjusted prior to shipment from our facility. All safety interlocks are checked for proper operation and the equipment is operated at the normal and maximum operating temperatures. An extensive quality assurance check list was completed to ensure the equipment met all Wisconsin Oven quality standards. #09959AB

 
 

A Message from Wisconsin Oven Corp.

Wisconsin Oven Ships Custom Conveyor Oven For Drying Paper Pulp Material

Published Date:  Tuesday, September 27, 2016 Wisconsin Oven Corporation announced the shipment of a natural gas fired three (3) zone conveyor oven to a packaging manufacturer for drying paper pulp material.

Wisconsin Oven Ships Composite Curing Oven For The Aerospace Industry

Published Date:  Tuesday, August 16, 2016 Wisconsin Oven Corporation announced the shipment of a composite curing oven for a leader in the aerospace industry.

Wisconsin Oven Ships Curing Conveyor Oven for a Leading Supplier of Flooring Products

Published Date:  Tuesday, June 28, 2016 Wisconsin Oven Corporation announced the shipment of one (1) natural direct gas fired three (3) zone conveyor oven with cool down to a leading supplier of flooring products.

As Seen In CompositesWorld

Wisconsin Oven introduces performance monitoring system to optimize oven maintenance
Wisconsin Oven Corp. has introduced a novel IIoT (Industrial Internet of Things) predictive maintenance technology designed to optimize oven efficiency.

CAMX 2020 exhibit preview: Wisconsin Oven
Wisconsin Oven Corp. is featuring its electrically heated, gas-fired and indirect gas-fired composite curing batch ovens.

Wisconsin Oven ships multi-zone ovens for carbon fiber cure
Designed for carbon fiber cure, the ovens have been upgraded for increased energy efficiency.

Wisconsin Oven upgrades curing control system
Wisconsin Oven (East Troy, Wis., U.S.) has announced release of the latest version of its established Wisconsin Premium Control System (WPCS) for data acquisition and control of the oven-based composites curing process.

Wisconsin Oven develops control system for composite curing ovens
The Premium Control System optimizes composite curing for aerospace and other applications.

CAMX 2019 exhibit preview: Wisconsin Oven Corp.
Wisconsin Oven Corp. manufactures electrically heated, gas-fired, and indirect gas-fired composite curing batch ovens designed to meet customers’ specific process requirements.

Wisconsin Oven composites curing oven

CAMX 2018 preview: Wisconsin Oven
Wisconsin Oven Corp. (East Troy, WI, US) is featuring its electrically heated, gas-fired and indirect gas-fired composite curing batch ovens designed to meet customers’ process requirements.

A&P Technology

Where the art and science of braiding meet
A&P has made a name for itself as a braider, but the depth and breadth of its technical aptitude comes into sharp focus with a peek behind usually closed doors.

CompositesWorld logo

Wisconsin Oven doubles manufacturing space
The company has added 130,000 ft2 of new space with the acquisition of a neighboring building in East Troy, WI, US.

VBO prepreg

VBO prepregs: The Vision SF50
OOA vacuum-bag-only process makes carbon fiber structures a reality for the world’s first personal jet.

CAMX offers unprecedented new product access
CAMX 2014, Oct. 13-16 in Orlando, Fla., promises to be North America's largest ever composites trade show and conference. As a result, exhibitors are coming to the event with a wide array of new and existing materials, machinery, software and technology designed to help make composites fabrication faster, easier and more adaptable. CompositesWorld has been gathering information from CAMX exhibitors about what they will be featuring and introducing in their booths. This week's CAMX newsletter offers a preview of some of what you will find on the show floor.

Albany Engineered Composites: Weaving the Future in 3-D
This 3-D weaver turned composite component supplier pursues a future in 3-D structures through continuous technology development.

ACMA COMPOSITES 2013 preview
For 2013, the American Composites Manufacturers Assn. (ACMA, Arlington, Va.) returns its annual U.S. COMPOSITES exhibition and convention to the East Coast’s sunny, fun capital, Orlando, Fla.

COMPOSITES 2012 Highlights
As ACMA’s annual conclave convened in North America’s gambling capital, show exhibitors and attendees placed their bets on better days.

SAMPE Tech 2011 in Texas
The Society’s annual fall gathering fills an exhibition hall this year nearly as big as the host state.

Berry Plastics ACE award

COMPOSITES+POLYCON 2009 Showcase
Despite the deepening recession, composites pros returned to the show in its new time slot to explore the wealth of products and services collected here.

SEICO 09 at a Glance

SAMPE Europe/JEC Composites 2009 preview
SAMPE Europe’s 30th annual spring conclave and the nearby JEC Composites Show characterize the latest in material and process technologies.

JEC 2009 floor map

JEC Composites 2009/SAMPE Europe preview
 Organizers predict good turnout in poor economy for annual Paris tradeshow.

COMPOSITES & POLYCON 2009 preview
 The ACMA’s annual tradeshow takes its first turn in its new January timeframe.

Out-of-autoclave tooling gets out of the blocks
General aviation aircraft manufacturer adopts new oven-cure tooling.

F-16 tail fin repair

The craft of aircraft repair
As the use of composites on commercial and military aircraft grows, repair facilities seek more science in what remains a primarily manual art.

Product Categories of Wisconsin Oven Corp.

Bonding equipment
Curing ovens/lamp arrays
Drying equipment
Furnaces
Heaters
Metal-treating and metal bonding equipment
Other auxiliary equipment
Ovens
Repair ovens