Wisconsin Oven Corp.
2675 Main St.
PO Box 873
East Troy , WI 53120 US
Wisconsin Oven Ships Custom Conveyor Oven For Drying Paper Pulp Material
Wisconsin Oven Corporation announced the shipment of a natural gas fired three (3) zone conveyor oven to a packaging manufacturer for drying paper pulp material. The recycled material will then be used in molded fiber packaging material for a variety of uses and industries. The environmentally friendly products are made of 100% recycled materials making them an excellent solution to companies looking to use sustainable packaging and reduce their environmental footprint.
The drying conveyor oven has a maximum temperature rating of 500°F with three (3) separate zones of control. The first two zones will have normal operating temperature of 420°F and 325°F, while the third zone is unheated for residual drying. The work chamber dimensions are 6’ W x 84’ L x 1’ H. Three (3) access doors were provided on the side of the oven body of each zone for a total of nine (9) access doors for ease of maintenance.
The conveyor oven utilizes top-down and bottom-up airflow in the first and second zone to maximize the drying rate of the paper pulp and only top-down air in the third zone. A flat wire belt was utilized for the continuous conveyor system along with a variable frequency drive that is adjustable from 0-3 FPM. Emergency stop buttons were located at the load and unload sections for operator safety.
“We work with our customers to develop the most effective design for their process needs. In this case three separate zones of control gave the customer the flexibility to adjust the temperature of the paper pulp drying process during the cycle without needing multiple units.” - Mike Grande, Sales Manager
Unique features of the drying conveyor oven include:
- Three (3) separate zones of control
- Conveyor extension load and unload ends
- Nine (9) total access doors for ease of maintenance
- Variable frequency drive for conveyor speed control
- Emergency stop buttons at the load and unload ends
- Programmable digital temperature controller
- Over temperature controller
- UL certified and labeled control panel
The conveyor oven is fully factory tested and adjusted prior to shipment to help reduce installation and start-up times. An extensive Quality Assurance check list was completed to ensure the equipment met all Wisconsin Oven quality standards. The industrial conveyor oven is backed by Wisconsin Oven’s Exclusive and Unprecedented 3-Year WOW™ warranty. This warranty covers all materials for all components (less wear items).
About Wisconsin Oven
Wisconsin Oven Corporation has been designing, engineering, and manufacturing industrial ovens and other heating equipment since 1973. Their custom and standard industrial ovens are used for a multitude of applications including heat treating, finishing, drying, and curing. Many of the industries they serve require specific temperature uniformity and equipment performance documentation. Their experienced design team is able to meet even the most stringent standards for their customers’ equipment. Wisconsin Oven realizes that the success of the company depends on their Championship team of employees, which is why they have developed a company culture that recognizes and rewards employees. The goal at Wisconsin Oven is to outperform competition and provide customers with outstanding products and service.
Wisconsin Oven is owned by Thermal Product Solutions (“TPS”), a leading American manufacturer of custom industrial ovens used for heat treating, finishing, drying, curing, manufacturing automation and process control. TPS is a global leader in thermal processing products and test solutions with brands including Baker Furnace, Blue M, Gruenberg, Lindberg/MPH, Lunaire, Tenney, and Wisconsin Oven. For more information on equipment solutions from TPS visit the website at www.thermalproductsolutions.com. #06396A
A Message from Wisconsin Oven Corp.
As Seen In CompositesWorld
Wisconsin Oven introduces performance monitoring system to optimize oven maintenance
Wisconsin Oven Corp. has introduced a novel IIoT (Industrial Internet of Things) predictive maintenance technology designed to optimize oven efficiency.
Wisconsin Oven ships multi-zone ovens for carbon fiber cure
Designed for carbon fiber cure, the ovens have been upgraded for increased energy efficiency.
Wisconsin Oven upgrades curing control system
Wisconsin Oven (East Troy, Wis., U.S.) has announced release of the latest version of its established Wisconsin Premium Control System (WPCS) for data acquisition and control of the oven-based composites curing process.
Wisconsin Oven develops control system for composite curing ovens
The Premium Control System optimizes composite curing for aerospace and other applications.
CAMX 2019 exhibit preview: Wisconsin Oven Corp.
Wisconsin Oven Corp. manufactures electrically heated, gas-fired, and indirect gas-fired composite curing batch ovens designed to meet customers’ specific process requirements.
CAMX 2018 preview: Wisconsin Oven
Wisconsin Oven Corp. (East Troy, WI, US) is featuring its electrically heated, gas-fired and indirect gas-fired composite curing batch ovens designed to meet customers’ process requirements.
Where the art and science of braiding meet
A&P has made a name for itself as a braider, but the depth and breadth of its technical aptitude comes into sharp focus with a peek behind usually closed doors.
Wisconsin Oven doubles manufacturing space
The company has added 130,000 ft2 of new space with the acquisition of a neighboring building in East Troy, WI, US.
VBO prepregs: The Vision SF50
OOA vacuum-bag-only process makes carbon fiber structures a reality for the world’s first personal jet.
CAMX offers unprecedented new product access
CAMX 2014, Oct. 13-16 in Orlando, Fla., promises to be North America's largest ever composites trade show and conference. As a result, exhibitors are coming to the event with a wide array of new and existing materials, machinery, software and technology designed to help make composites fabrication faster, easier and more adaptable. CompositesWorld has been gathering information from CAMX exhibitors about what they will be featuring and introducing in their booths. This week's CAMX newsletter offers a preview of some of what you will find on the show floor.
Albany Engineered Composites: Weaving the Future in 3-D
This 3-D weaver turned composite component supplier pursues a future in 3-D structures through continuous technology development.
ACMA COMPOSITES 2013 preview
For 2013, the American Composites Manufacturers Assn. (ACMA, Arlington, Va.) returns its annual U.S. COMPOSITES exhibition and convention to the East Coast’s sunny, fun capital, Orlando, Fla.
COMPOSITES 2012 Highlights
As ACMA’s annual conclave convened in North America’s gambling capital, show exhibitors and attendees placed their bets on better days.
SAMPE Tech 2011 in Texas
The Society’s annual fall gathering fills an exhibition hall this year nearly as big as the host state.
COMPOSITES+POLYCON 2009 Showcase
Despite the deepening recession, composites pros returned to the show in its new time slot to explore the wealth of products and services collected here.
SAMPE Europe/JEC Composites 2009 preview
SAMPE Europe’s 30th annual spring conclave and the nearby JEC Composites Show characterize the latest in material and process technologies.
JEC Composites 2009/SAMPE Europe preview
Organizers predict good turnout in poor economy for annual Paris tradeshow.
COMPOSITES & POLYCON 2009 preview
The ACMA’s annual tradeshow takes its first turn in its new January timeframe.