Vapormatt Ltd.

Systems that prepare composite parts for bonding, lacquering and painting. The wet blast process increases adhesion and shear strength of bonded components. By lightly removing the top layer, the surface area for bonding is increased and any waxy coats removed.

Monarch Centre, Venture Way
Priorswood Industrial Estate
Taunton, Somerset, TA2 8DE GB

Connect

As Seen In CompositesWorld

Wet-Blast Surface Prep - 4/1/2007
Vapormate 3 is a new wet-blast machine developed by Vapormatt (Guernsey, British Channel Islands, U.K. and Bath, Pa.) for surface preparation of postcured carbon fiber-reinforced (and other) composite parts prior to painting or coating. In the system’s 995-mm by 700-mm by 700-mm (about 39-inch by 27.5-inch by

Wet-blast surface prep
Vapormate 3 is a new wet-blast machine developed by Vapormatt (Guernsey, British Channel Islands, U.K. and Bath, Pa.) for surface preparation of postcured carbon fiber-reinforced (and other) composite parts prior to painting or coating. In the system’s 995-mm by 700-mm by 700-mm (about 39-inch by 27.5-inch by 27.5-

Product Categories of Vapormatt Ltd.

Tools/tooling materials
  • Tooling equipment, materials and supplies
    • Mold cleaners
Auxiliary processing equipment, repair equipment, and supplies
  • Auxiliary processing equipment
    • Abrasive tools
    • Sanders, grinders
    • Other auxiliary equipment
Design, testing, consulting, other services
  • Repair services, equipment and machines