ROYAL Engineered Composites Inc.

Custom-fabricated composite components for the aerospace industry. Design and build-to-print. Primarily hand layup and autoclave cure. Products: secondary structure, engine components, rigid ducting, radomes and fairings. Final assembly with application of special coatings.

1046 E. Ninth St.
Minden, NE 68959 US

Connect

As Seen In CompositesWorld

Royal delivers first parts to Fokker Aerostructures
U.S.-based Royal Engineered Composites is manufacturing for Fokker the fin top fairing for the vertical tail section on a new business jet platform.

Royal Engineered Composites secures Bell helicopter work
The fabricator will make 50 parts for the new Bell 525 Relentless model, including tail boom and cockpit assemblies.

Royal to expand capability with 30-ft autoclave
Royal Engineered Composites, in anticipation of increased production, is preparing for installation of a 30-ft by 12-ft autoclave by November.

Biz Briefs
News from National Aerospace Laboratory in The Netherlands, Kaman Corp., Vermont Composites, Royal Engineered Composites and GKN Aerospace.

News Briefs: Dec. 6, 2011
Norplex-Micarta names Richard Chen project manager; Renegade names Kory Abbitt director of business development; Royal Engineered Composites expands Nebraska facility.

Biz Briefs
Business briefs from Magma Global, Web Industries, Conductive Composites, China and Royal Engineered Composites.

Royal Engineered Composites breaks ground on first phase of expansion
The phase one expansion, 30,000 sq-ft, will house a cleanroom, autoclaves, ply cutting table and a waterjet machining center.

Biz Briefs
Business briefs from Oxeon, Royal Engineered Composites, Goodrich, SAERTEX, Toho Tenax and Quickstep.

News Briefs: Feb. 1, 2011
Ceramaterials moves headquarters to Port Jervis, N.Y.; Delta Composites wins small business award; Barry Ashton joins HK Research sales team; PPG glass qualified for aerodyn wind blades; Royal Engineered Composites completes fifth Nadcap audit; Seco Tools offers Feb. 8 machining seminar.

EOS laser sintering machine

Direct manufacturing of military aircraft parts
 Laser sintering process shortens lead time, simplifies production of complex, high-performance parts.

CW2008 booth

COMPOSITESWORLD Expo 2008 Showcase
The inaugural COMPOSITESWORLD Expo Conference and Exhibition draws participants from all segmentsof the industry, including many new faces.

Product Categories of ROYAL Engineered Composites Inc.

Tools/tooling materials
  • Tools
    • Cast
    • Composite
      • Composite, fiberglass
      • Composite, other
    • Metal
      • Metal, aluminum
      • Metal, steel
      • Metal, other
Testing, gauging, monitoring, analytical equipment and software
  • Coordinate measurement machines
  • Cure-monitoring equipment
  • Environmental testing equipment
  • Fatigue-testing equipment
  • Flexural testers
  • Flow meters
  • Gel timers
  • Hardness testers
  • Hardness testers, Barcol
  • Leak-testing equipment
  • Mechanical test fixtures
  • Modulus testers
  • Pressure monitoring equipment
  • Resin content analyzers
  • Rheological testing equipment
  • Surface analyzers
  • Temperature monitoring equipment
  • Tensile testers
  • Thermal analysis instruments
  • Thickness measuring equipment
  • Universal test frames
  • Viscosity measurement equipment
  • Volatile monitoring equipment
  • NDI equipment
    • NDI equipment, ultrasonic
Fabricating services
  • Thermoset materials
    • Adhesive bonding
    • Autoclave cure
    • Coating and painting
    • Compression molding
    • Cutting, finishing, and machining
    • Filament winding
    • Hand layup
    • Honeycomb structures
    • Metal bonding
    • Moldmaking and patternmaking
    • Prototyping
    • Resin transfer molding (RTM)
    • Vacuum-assisted resin transfer molding (VARTM)
Composite Structures & Components
  • Aerospace, aircraft interior
  • Aerospace, radomes
  • Armor, composite
  • Infrastructure, composite
  • Laminate panels, with core
  • Laminate sheets, solid
Design, testing, consulting, other services
  • CAD/CAM/CAE design
  • Finite element modeling/analysis (FEM/FEA)
  • Product design