Radius Engineering Inc.
1042 West 2780 South
Salt Lake City , UT 84119 US
As Seen In CompositesWorld
Radius Engineering workcell enables composite flare housings for F-35
New flare housing manufacturing facility will utilize RTM workcell from Radius Engineering to manufacture composite housings for the F-35 Lightning II aircraft’s countermeasure flares.
Developing next-generation composites talent
The M.C. Gill Composites Center at the University of Southern California has steadily grown to become one of the industry’s educational and R&D stalwarts.
JEC World 2016, the full report
CompositesWorld's editors report on the technologies and products that caught our eye at JEC World 2016, in early March.
GE Aviation, Batesville, MS, US
With a supply chain busy making commercial jet engines like the GE90, GEnx, LEAP and GE9X, GE Aviation has invested heavily in its composites capabilities in Batesville.
Reducing manufacturing cost via RTM
Airbus Bremen aims to replace dozens of prepreg components and assembly operations with a unitized multispar composite flap molded in a one-shot process.
CMF project's process combines prepreg with RTM
Composite Multispar Flap (CMF) project at Airbus Bremen demonstrates SQRTM process for producing aircraft flaps
The rise of HP-RTM
Decades of development have propelled it to prominence but its future demands industrial solutions for handling cost, complexity and process control.
JEC Europe 2014 Review
The composites world met again in Paris, vibrant, stronger, and more forward-looking than ever before.
The market for OOA aerocomposites, 2013-2022
In the coming decade, out-of-autoclave technologies will increase composites penetration into primary flight structures.
HPC's 20th Anniversary: Thanks to HPC’s charter advertisers
Every trade publication lives and dies by its advertisers, and those who had the gumption to ante up for HPC’s premier issue are listed here and those who are still with us (see page numbers below) are gratefully recognized with the HPC 20th Anniversary Medallion.
SAMPE Europe 2013/JEC Europe 2013 highlights
Held concurrently, these two seminal European composites events weathered a rare Parisian snowstorm to plumb the depth and breadth of the industry.
Tooling for composites: Evolutionary trajectory
New technologies and improved methods keep up as tools get bigger and more complex and toolmaking gets ever more challenging.
SQRTM enables net-shape parts
New out-of-autoclave process combines resin transfer molding with prepregs for complex helicopter part prototype.
Automate or emigrate
Automated fiber and tape placement is not just a notion, but a real manufacturing strategy, and one being embraced by HITCO Carbon Composites.
Autoclave Quality Outside The Autoclave?
Pioneers of out-of-autoclave processing in aerospace applications answer a qualified but enthusiastic Yes!
- Pultrusion equipment, thermosets
- Resin transfer molding equipment (RTM)
- Vacuum-assisted resin transfer molding equipment (VARTM
- Other primary manufacturing equipment
- Presses, compression molding
- Presses, injection Molding
- Presses, software and controls
- Other tools/tooling materials
- RTM/resin infusion
- Resin injection
- Composite, other
- Metal, aluminum
- Metal, invar
- Metal, steel
- Mandrels, aluminum
- Mandrels, inflatable
- Mandrels, segmented
- Mandrels, steel
- Auxiliary processing equipment
- Resin injection equipment, pultrusion
- Impregnation lines
- Impregnation lines, powder
- Thermoplastic materials
- Vacuum-assisted resin transfer molding (VARTM)
- Thermoset materials
- Resin transfer molding (RTM)
- Aerospace, flight control surfaces
- Aerospace, fuselage/wing
- Aerospace, radomes
- Carbon/carbon composites
- Infrastructure, composite
- Laminate panels, with core
- Laminate sheets, solid
- Other composite structures
- CAD/CAM/CAE design
- Product design
- Consulting, materials
- Consulting, process development