PTM&W Industries Inc.

Formulator of two-part epoxy and urethane resin systems for composite fabrication, composite tooling, rapid prototyping and industrial applications. Formulated systems include surface coats, laminating, infusion and casting resins and adhesives (two-part systems).

10640 S. Painter Ave.
Santa Fe Springs, CA 90670 US

Additional Locations:

, NY US
(315) 264-1540


, KS US
(913) 381-3221


, GA US
(770) 751-1844


, MI US
(517) 543-1940

Connect

As Seen In CompositesWorld

VX Aerospace: Small company, big performance
Innovative design, OOA manufacturing and C-PLY laminate construction produce “big fabricator” aerostructures in fewer steps at low cost.

HPC's 20th Anniversary: Thanks to HPC’s charter advertisers
Every trade publication lives and dies by its advertisers, and those who had the gumption to ante up for HPC’s premier issue are listed here and those who are still with us (see page numbers below) are gratefully recognized with the HPC 20th Anniversary Medallion.

Portable wind turbine powers the warrior
DARPA-financed program puts wind energy to use for battery and system recharging.

Nida-Core prod photo

CompositesWorld Expo 2009 Product Showcase
 Despite economic gloom, CWE’s second outing attracts innovation-rich exhibitors and a very motivated group of knowledge-hungry showgoers.

Propeller Spinner 2

Cost- and time-saving preform process used for propeller spinner
Carbon fiber/epoxy spinner uses pulp slurry preforming process combined with vacuum infusion molding.

Liberty Technicians lay up carbon/epoxy prepreg for a Liberty XL-2 two-seat, piston-powered aircraft.

Flying high on composite wings
FRP wings, fuselages and other primary and secondary structures on GA prop, turboprop and jet aircraft help lift this market to unprecedented heights.

SparrowHawk load test

SparrowHawk all-carbon composite sailplane
The first-ever all-carbon composite sailplane yields unprecedented maneuverability and top performance.

Step 9: Airfoils are installed over the axles and the vehicle is painted.

Composites Refine Soap Box Derby Racers
Starting with a molded kit, Masters racers add fiberglass to stiffen and streamline their vehicles.

Product Categories of PTM&W Industries Inc.

Materials
  • Matrix resins, thermoset
    • Urethane
    • Other thermosets
    • Epoxy
      • Epoxy, 250 F cure
      • Epoxy, 350 F cure
      • Epoxy, toughened
  • Adhesives
    • Acrylic
      • Acrylic, Paste
    • Bismaleimide
      • Bismaleimide, Paste
    • Cyanoacrylate
      • Cyanoacrylate, Paste
    • Epoxy
      • Epoxy, Paste
    • Nylon
      • Nylon, Paste
    • Phenolic
      • Phenolic, Paste
    • Polyimide
      • Polyimide, Paste
    • Silicone
      • Silicone, Paste
    • Urethane
      • Urethane, Paste
    • Other
      • Other, Paste
  • Casting resins
    • Epoxy
    • Other casting resins
  • Compounds
    • Fairing compounds (formerly paste systems)
  • Catalysts, promoters and curing agents
    • Hardeners
Tools/tooling materials
  • Tooling equipment, materials and supplies
    • Master pattern material, polymeric
    • Urethane
    • Release agents
      • Mold releases, liquid external
      • Mold releases, waxes
Auxiliary processing equipment, repair equipment, and supplies
  • Supplies
    • Filler paste