
Pro-Set Inc.
100 Patterson Ave.
P.O. Box 656
Bay City
,
MI
48707
US
Division
Gougeon Brothers Inc.
Connect
- Visit Company Website
- 888-377-6738

Pro-Set Tooling Epoxies
STANDARD & HIGH-TEMP TOOLING EPOXIES
PRO-SET Tooling Epoxies are 2-part products formulated for surfacing molds and plugs. The state-of-the-art chemistry behind these epoxies makes them easy to use, saving on labor and yielding high-quality results. They blend quickly, spread easily and shrink minimally.
PRO-SET High-Temperature Epoxies are a system of high-performance epoxies consisting of Surface Coat Epoxy, Laminating Epoxy, and an Infusion Epoxy. When combined to manufacture composite molds, they can be demolded after 24-48 hours at room temperature before a freestanding postcure.
The Tg of this system is as high as 300°F (149°C) with proper post cure. It has excellent temperature stability and part cosmetics.
The Infusion and Laminating Epoxies can be dyed, upon request, to provide for visual quality control. A yellow dye in the resin and a blue dye in the hardener, when properly metered and thoroughly mixed, will result in a consistent shade of green. The Surface Coat Epoxy is available only in black.
High-Temp Infusion Resin
- HTP-180 High-Temp Infusion Resin (elevated cure)
High-Temp Infusion Hardener
- HTP-280 High-Temp Infusion Hardener
High-Temp Laminating Resin
- HTP-182 High-Temp Laminating Resin
High-Temp Laminating Hardener
- HTP-284 High Temp Laminating Fast Hardener
- HTP-286 High Temp Laminating Slow Hardener
High-Temp Surface Coat Resin
- HTP-187 High-Temp Surface Coat Resin
High-Temp Surface Coat Hardener
- HTP-187 High-Temp Surface Coat Hardener
A Message from Pro-Set Inc.
As Seen In CompositesWorld

Composites suppliers, fabricators respond to coronavirus
Companies across the composites industry supply chain share how the COVID-19 pandemic is affecting their businesses, and how they are available to help.

Disruptive composite tubing manufacturing
TUBETEC delivers high-performance, hollow composites in unimaginable shapes with beautiful surface finish, fast turn-around and affordability.

New York Yacht Club American Magic names PRO-SET as official supplier
The team will use PRO-SET epoxies in the construction of the AC75, a 23-m monohull designed to sail above water on advanced hydrofoils.

IBEX 2018: Growth, 3D printing and thermoplastic composites in the marine industry
Sustainability was the fourth trend, including recycling end-of-life fiberglass boats.

A fascinating inside look at a marine design – three decades ago
Fabricated by Gougeon Manufacturing in 1990, Incognito is a composite catamaran that’s still setting speed records and besting much newer craft.

Composites Pavilion at AIA 2018
New composite products for architecture/construction and student designs innovate how composites can be used.

Advances in Wind Energy workshop registration opens
Two-day workshop from Composites One and the Closed Mold Alliance and IACMI explores advanced materials, manufacturing processes and repair techniques for wind energy applications.

Gougeon Brothers acquires Entropy Resins
California-based Entropy Resins manufactures bio-based epoxy formulations for adhesive, coating, and composites applications.

A partnership for sustainable composites
CW talks to Entropy Resins and Gougeon Brothers about their future as one company.

Gougeon funds Winona composites scholarship
A new scholarship benefiting Winona State University (Winona, MN, US) students majoring in Composites Materials Engineering has been endowed by the Gougeon Employees Foundation.

Structural adhesives, Part I: Industrial
Today’s myriad chemistry options enable formulators to tailor adhesives to customers' exact application requirements.

Pro-Set high-capacity epoxy pumps
Gougeon Brothers Inc. (Pro-Set Inc., Bay City, MI, US) has introduced new high-volume epoxy pumps that dispense epoxy faster than any pump the company has ever offered.

Structural work of art
Composites fabricator uses an innovative molding approach and digital techniques to actualize architect’s customized residential stairway.

Report from IBEX 2015
As always, IBEX supplied new products, processes and education, not only to boatbuilders, but to the composites industry overall.

Moldmaker bypasses patterns for high-tech production catamarans
Direct-to-milled-tool process simplifies large deck mold development.

IBEX 2013 Show Review
Evidence of a marine industry rebound and a trend toward supplier M&A as the world’s largest boatbuilding trade show looks ahead to smoother sailing … and Tampa.

IBEX 2012 Review
Under the banner “The Future of Marine Technology,” the 22nd International BoatBuilders’ expo confronts a brave new world.

ACMA COMPOSITES 2013 preview
For 2013, the American Composites Manufacturers Assn. (ACMA, Arlington, Va.) returns its annual U.S. COMPOSITES exhibition and convention to the East Coast’s sunny, fun capital, Orlando, Fla.

Sailing the sea with composite wings
Autonomous sailing vessel patrols with patented WingSail technology.

IBEX 2011 Review
As the International BoatBuilders’ Exhibition & Conference again docks in Louisville, the industry continues a slow and tentative rebound.

IBEX 2011 Preview
The world’s largest exhibition for the boatbuilding industry sets sail inland again, on the Ohio River. Destination: Louisville.