Meggitt Polymers & Composites

Advanced composite materials for extreme aerospace environments. The materiaan address virtually any geometric challenge. Mastery of complex processes means the company can make parts no one else can in repeatable, high volumes, ranging from engine components to super-aerodynamic radomes.

669 Goodyear St.
Rockmart, GA 30153 US

Additional Locations:
1400 Jamike Ave.
Erlanger, KY 41018 US
(859) 525-8040

10540 Heater Ct.
San Diego, CA 92121 US
(858) 824-8976

Division
Meggitt

Connect

As Seen In CompositesWorld

Renegade receives Meggitt supplier award

Renegade recognized for supplier innovation
Renegade Materials was recognized for Supplier Innovation by Meggitt Polymers & Composites Group at Meggitt’s 2017 Global Supplier Conference.

Meggitt Polymers & Composites to supply radome for Embraer E-Jet E2
Meggitt will design, manufacture and assemble Embraer’s installation kit, comprised of a radome, skirt seal, adapter plate and fittings.

Congressman Darrell Issa visits Meggitt Polymers & Composites
The San Diego location is the composite groups Center of Excellence for complex molded structures used in extreme environments.

Composites industry is growing up—but hurdles still remain
It’s the era of when, not if, for the use of composite materials.

Meggitt expands carbon brake manufacturing capacity
With the expansion, Meggitt Aircraft Braking Systems moved its wheel-and-brake maintenance and repair operations from Akron, Ohio to Danville, Kentucky.

Meggitt completes acquisition of Cobham's composites businesses
Advanced composites businesses in the US and UK will be integrated into Meggitt's polymers and composites division.

Some thoughts on the M&A "heat wave"
CompositesWorld's editor-in-chief Jeff Sloan takes some admittedly educated guesses at the significance of the six momentous acquisitions that were announced in the short space from mid-July through early August in the composites industry.

Meggitt acquires Cobham’s composites business for $200 million
The businesses will be integrated into Meggitt Polymers & Composites (MPC), a division of Meggitt.

Cobham Composites: San Diego, CA, US
An aerocomposites force since the dawn of the 1980s, this fabricator’s Big Idea is to move from quality control to in-situ process control on the strength of metrics powered by Big Data.

Cobham celebrates 22 years of JAVELIN production
San Diego-based Cobham Composite Products has delivered more than 200,000 compression-molded composites parts on time over the last 22 years for the U.S. Army's JAVELIN Missile Program. Cobham also has received NADCAP accreditation.

Paris Air Show 2013: A century of aircraft progress
Torrential rains couldn’t dampen the spirit of innovation or stop the flood of business aerospace announcements.

Space mission maximized via minimized survivability
CFRP design and manufacturing flexibility prove key in first spacecraft fuel tank designed to disintegrate upon reentry for improved mission efficiency and debris mitigation.

Cobham wins auxiliary fuel tanks contract with Embraer
Cobham has won a contract from Embraer Defense and Security worth $30 million to develop and supply the Auxiliary Fuselage Fuel Tank for the KC-390 tanker.

Cobham to make radomes for Embraer transport
Cobham Antenna Systems will design and manufacture nose radomes for Embraer's KC-390 military transport aircraft developed for the Brazilian Air Force. First flight is scheduled for 2014.

Cobham composite casing aboard first MALD-J flight
The U.S. Air Force has completed a flight test of a MALD-J (Miniature Air-Launched Decoy) with a composite external casing produced by Cobham Composites.

Cobham Composites wins Pratt & Whitney engine contract
The $45 milliion long-term agreement involves manufacture of medium- and high-temperature composites for Pratt & Whitney's F135 and F119 engines, which power the F-35 and F-22 respectively.

Cobham wins follow-on contract for composite missile components
Cobham Analytic Solutions has received a follow-on production contract valued at $5.7 million from Raytheon/Lockheed Martin Javelin Joint Venture in support of the Javelin missile program.

Cobham's military decoy with composites fuselage approved for production
Miniature Air-Launched Decoy (MALD) is a state-of-the-art, low-cost flight vehicle that is modular, air-launched and programmable. It weighs less than 300 lb/136 kg and has a range of approximately 500 nautical miles.

Cobham Composites opens newest facility in Suffolk, Va.
Facility will manufacture bomb covers, Miniature Air-Launched Decoy fuselages, CH-53K helicopter rotor components, and internal components for F-135 and F-119 engines; plant will employ 200 by 2014, with more expected.

Aeroindustryjobs: Jobs of the week, April 13, 2010
Aerospace job opportunities from Aeroindustryjobs.com at Hexcel, Cobham Composites and GE Aviation.

Product Categories of Meggitt Polymers & Composites

Tools/tooling materials
  • Tools
    • Graphite, cast
Auxiliary processing equipment, repair equipment, and supplies
  • Supplies
    • Vacuum valves and pumps
    • Wiping cloths
Fabricating services
  • Thermoset materials
    • Adhesive bonding
    • Autoclave cure
    • Coating and painting
    • Cutting, finishing, and machining
    • Hand layup
    • Honeycomb structures
    • Moldmaking and patternmaking
    • Prototyping
    • Resin transfer molding (RTM)
    • Vacuum-assisted resin transfer molding (VARTM)
Composite Structures & Components
  • Aerospace, radomes
  • Armor, composite
  • Carbon/carbon composites
  • Ceramic matrix composites
  • Laminate panels, with core
  • Laminate sheets, solid
  • Other composite structures
Design, testing, consulting, other services
  • CAD/CAM/CAE design
  • Finite element modeling/analysis (FEM/FEA)
  • Market research
  • Materials analysis
  • Product design
  • Repair services, composites