Magnolia Advanced Materials Inc.

4360 Northeast Expressway
Atlanta , GA 30340 US


A Message from Magnolia Advanced Materials Inc.

About Magnolia Advanced Materials, Inc.

Since 1957, Magnolia has developed more than 2,000 products over the years and currently sells about 700 of these to a very diverse customer base including companies involved in aerospace, the manufacture and repair of fixed and rotary wing aircraft for commercial, general and military aviation, energy, automotive, missiles and launch vehicles, defense, transportation, infrastructure, electronics, marine, communications, construction, recreation, and more.

As Seen In CompositesWorld

Tech Table: Adhesives
A table of aerospace structural adhesives includes collected from data provided by suppliers. 

ACPT Inc.'s facility in Huntington Beach, CA, US

Low-profile, high-performance manufacturer
 Advanced Composite Products & Technology Inc. provides innovative and cost-efficient composite solutions to some of the most difficult and demanding real world applications.

CAMX 2018 preview: Magnolia Advanced Materials
Magnolia Advanced Materials (Atlanta, GA, US) is exhibiting Magnolia 7035, a new, ultra-low density syntactic foam for core splice applications.

Boeing aircraft

Structural adhesives, Part II: Aerospace
Tried-and-true legacy epoxies are a must for aerospace composites, but usage is increasing with improved forms.

JEC Americas 2014 Review
Composites industry exhibitors at this combined show emphasized the textile side of the fiber/resin mix and touted process automation.

HPC's 20th Anniversary: Thanks to HPC’s charter advertisers
Every trade publication lives and dies by its advertisers, and those who had the gumption to ante up for HPC’s premier issue are listed here and those who are still with us (see page numbers below) are gratefully recognized with the HPC 20th Anniversary Medallion.

lightning strike protection

After lightning strikes: Repair considerations
When lightning does strike, aircraft LSP system repairs must be done correctly to ensure restoration of protection.

SAMPE 2010 Seattle Showcase
SAMPE’s first-ever foray into Boeing Country wrapped up with the M&P organization’s biggest draw this decade.

2010 SAMPE Europe/JEC Paris Showcase
Record crowds and reignited technological development testified to the composite industry’s renewed health and the recent recession’s demise.

SAMPE Tech Wichita Exhibit Area

Wichita welcomes SAMPE Tech
 The Society’s Fall Conference flourishes in one of the epicenters of U.S. aerospace activity.

Virtek/Gerber booth

JEC COMPOSITES 2009 Product Showcase
Despite the doleful state of the global economy, the turnout in Paris — exhibitors and visitors — proved surprisingly strong.

Braided Pressure Vessel

JEC Composites 2009 showcase
 Despite the doleful state of the global economy, the turnout in Paris — exhibitors and visitors — proved surprisingly strong.

SEICO 09 at a Glance

SAMPE Europe/JEC Composites 2009 preview
SAMPE Europe’s 30th annual spring conclave and the nearby JEC Composites Show characterize the latest in material and process technologies.

Eight Mile 2

Integrated drop-in-place superstructure the solution for Eight Mile Bridge
Based on the successful performance of previous composite bridge decks installed in Hamilton County, Ohio, highway engineers recently took a bold step, specifying an integrated composite bridge superstructure — that is, deck and support beams together in one unit — to replace a deficient span known as Eight Mile Bridge.

 The ACMA’s annual tradeshow takes its first turn in its new January timeframe.

Bonding Technology: Thermosetting Structural Adhesives
A wealth of epoxies, polyurethanes and acrylics speed assembly and cut manufacturing cost in an ever-wider range of composites applications.

Replication of discontinued additive saves resin requalification costs on missile program
Niche chemical products often become too expensive to manufacture and distribute, particularly when demand is limited and environmental rules tighten. Such was the case with a specialty epoxy diluent trade named Unox 4206, developed by The Dow Chemical Co. (Midland, Mich.) and distributed by H.B. Fuller (St. Paul,

Phenolic Seats

Passenger Safety: Flame, Smoke and Toxicity Control
Tried, true -- and some new -- FST-resistant products for manufacturers of composites in rail- and road-based people movers.

Sea Wall

User-friendly resins expanding composites' reach
Novel niche formulas enable composites breakthroughs for new market applications, traditional material replacement.

Chart showing pultruded deck members

A guide to selection of methacrylate, urethane and epoxy adhesives
A practical examination of the complexities of adhesive selection.

structural paste adhesive

New film and paste adhesives for specialized applications
Customer performance demands drive thriving film and paste technology development.

Product Categories of Magnolia Advanced Materials Inc.

  • Matrix resins, thermoset
    • Other thermosets
    • Epoxy
      • Epoxy, 250 F cure
      • Epoxy, 350 F cure
      • Epoxy, toughened
  • Adhesives
    • Epoxy
      • Epoxy, Paste
      • Epoxy, Solvent-based
      • Epoxy, Water-based
      • Epoxy, Other
  • Gel coats
    • Chemical-/corrosion-resistant
    • Conductive
    • Fire-retardant
    • General-purpose
    • Marine
    • Potable-water grades
    • Other gel coats
  • Coatings and sizings
    • Conductive
    • Decorative
    • Electrostatic
    • Flame retardant
    • In-mold
    • Protective
    • Other coating materials
  • Casting resins
    • Epoxy
  • Compounds
    • Fairing compounds (formerly paste systems)
    • Solid surface
    • Other compounds
  • Catalysts, promoters and curing agents
    • Curing agents, amines
    • Curing agents, others
    • Hardeners
  • Resin additives & modifiers
    • Ablatives
    • Conductive fillers
    • Flame/smoke-suppressant additives
    • Nanomaterials (carbon nanotubes, fullerenes, etc.)
    • Thickening agents
    • Toughening agents
    • UV stabilizers
    • Viscosity control agents
    • Other additives/modifiers
Tools/tooling materials
  • Tooling equipment, materials and supplies
    • Master pattern material, polymeric
Auxiliary processing equipment, repair equipment, and supplies
  • Supplies
    • Filler paste
    • Shim materials
    • Other supplies
Design, testing, consulting, other services
  • Product design