General Plastics Mfg. Co.
4910 Burlington Way
Tacoma , WA 98409 US
General Plastics President/CEO Mitchell Johnson, Ph.D., to Speak on Leadership Panel at the Foam Expo Conference March 26 – 28, 2019
Mitchell Johnson, Ph.D., President/CEO of General Plastics Manufacturing Company will be one of the speakers at the leadership panel, Reducing Material & Equipment Cost While Improving Foam Capabilities, on March 26, 2019, 10:00 am, Track 1, at Foam Expo North America in Novi, Michigan.
“The topic is timely given the current market pressures caused by increasing cost of raw materials while ensuring that we continue to deliver quality products,” said Dr. Johnson. “As a company, we have to look at mitigating risks brought on by these pressures so it doesn’t disrupt our customers’ manufacturing process.” General Plastics’ approach is to actively consider insourcing processes and raw materials as well as implement new technology. “These measures will help us consistently deliver quality innovative products that meet the new demands for cellular plastics. This is the key to our company’s growth,” Johnson adds.
One of these innovations will be showcased at the General Plastics’ booth #425. LAST-A-FOAM® FR-4800 was recently launched in response to the need for a tooling board that provides a high-performing and cost-effective solution for manufacturing tools and parts for prototypes, concept proofs, and short-run production parts. FR-4800 can be used in applications with peak temperatures up to 480°F (249°C) and continuous use of 400°F (240°C). Its CTE, which is similar to aluminum, is reliable and repeatable, allowing customers to produce more accurate tooling surfaces.
In addition to tooling boards, the company will showcase various rigid and flexible polyurethane foam sheet samples and market applications. These applications include dielectric material, molded foam and padded parts, and core material for use in aerospace interiors and automotive floor and wall panels. The information and samples that will be available at the General Plastics booth will demonstrate the versatility of LAST-A-FOAM® polyurethane foam products, the breadth of the company’s capabilities and its focus on innovation.
About General Plastics Manufacturing Company
Tacoma, Washington-based General Plastics Manufacturing Company has been a leading innovator in the plastics industry for 75 years. The company develops and manufactures rigid and flexible polyurethane foam products, which include its signature LAST-A-FOAM® brand series and build-to-print composite parts.
Directly or through its network of distributors, General Plastics serves the aerospace and defense, nuclear transportation packaging, composite core, prototype and modeling, construction, dimensional signage, telecommunications, marine and subsea industries. General Plastics is certified to ISO 9001:2015/AS9100D and meets the rigorous demands of numerous leading quality systems, which include NQA-1, Mil-I-45208A and Boeing Company D6-82479. Please visit www.generalplastics.com.
A Message from General Plastics Mfg. Co.
As Seen In CompositesWorld
CAMX 2020 exhibit preview: General Plastics
General Plastics Manufacturing Co. is showcasing its LAST-A-FOAM core products, custom molding capabilities and high-temperature, low-CTE tooling board.
Composites suppliers, fabricators respond to coronavirus
Companies across the composites industry supply chain share how the COVID-19 pandemic is affecting their businesses, and how they are available to help.
CAMX 2019 exhibit preview: General Plastics
General Plastics Manufacturing Co. is showcasing its new LAST-A-FOAM FR-4800 tooling board at its CAMX 2019 booth.
CAMX 2018 preview: General Plastics
General Plastics (Tacoma, WA, US) is featuring its new high-temperature, low-CTE LAST-A-FOAM FR-4800 tooling board.
General Plastics launches ultrahigh-temperature tooling board
General Plastics Mfg. Co. (Tacoma, WA, US) expanded its line of high-temperature tooling board materials with the introduction of LAST-A-FOAM FR-4800, an autoclave-capable, high-density epoxy-urethane foam designed for master plug manufacturing, tool proofing, vacuum form tooling, pattern making, and short-run production tooling applications.
CAMX 2017 preview: General Plastics
General Plastics Mfg. Co. (Tacoma, WA, US) is showcasing its new LAST-A-FOAM RF-2200, a lightweight material that provides an RF-transparent protective layer for radome and antenna applications.
JEC World 2017 exhibit preview
JEC World will be held March 14-16 in Paris. CW previews some of the products and technologies that will be at the show.
JEC World 2016, the full report
CompositesWorld's editors report on the technologies and products that caught our eye at JEC World 2016, in early March.
Composites 101: Tooling
Composite parts are formed in molds, also known as tools. Tools can be made from virtually any material. The material type, shape and complexity depend upon the part and length of production run. Here's a short summary of the issues involved in electing and making tools.
CFRP camera boom enables safe spill inspection
NONA Composites’ 32m REACH structure meets tight remediation schedule at DoE radioactive waste storage site.
Composite tooling without oven or autoclave
No Oven No Autoclave technology has been demonstrated in tooling for NASA, including multiple thermal cycles and use for curing epoxy infused out-of-autoclave parts.
Pierce County trains skilled workers through collaborative curriculum building
Bruce Kendall, the president and CEO of the private, nonprofit Economic Development Board (EDB) for Tacoma-Pierce County (Wash.), reports on the success of a collaborative training curriculum development program that produces skilled workersfor the aerospace industry.
Tooling boards improve processes
In the composites industry, many parts are the product of one-off or few-of-a-kind production programs. In response, tooling material suppliers today provide an increasing variety of relatively inexpensive materials grouped under the heading of tooling board.
SAMPE 2009 Product Showcase
Showgoers at the SAMPE 2009 Conference and Exhibiton in Baltimore, Md. found many suppliers undeterred by poor economic news.
Taking Up Tooling Boards
Tooling Board ManufacturersEpoxy and polyurethane tooling boards are a standby for creating models or low-run-production tooling.
SAMPE 2005 Product Showcase
SAMPE's U.S. Symposium and Exhibition highlights technological innovation and market expansion.
Blast protection for large structures
Hardening of public buildings against terrorist threats represents a potentially huge market for antiballistic composites.
Getting To The Core Of Composite Laminates
A wealth of low-cost core solutions are available for high-performance sandwich structures.