General Plastics Mfg. Co.
4910 Burlington Way
Tacoma , WA 98409 US
General Plastics' Flame-Retardant Polyurethane Foam Plays Pivotal Role in Successful Ground Test of World's Largest Solid Rocket Motor for NASA Space
LAST-A-FOAM FR-4306 polyurethane foam tapped for nozzle closures in Orbital ATK's five-segment rocket boosters for NASA missions to explore deep space.
General Plastics customer Orbital ATK, in partnership with NASA, successfully completed the second of two booster qualification motor tests (QM-2) for NASA’s Space Launch System (SLS) on June 28 in Promontory, Utah. Orbital ATK designs, builds and delivers space, defense and aviation systems for customers around the world.
The 322-foot SLS, in conjunction with NASA’s Orion spacecraft, provides a flexible deep space exploration platform to transport humans and cargo to multiple destinations across our solar system. The five-segment SLS motors were developed by Orbital ATK, who utilized LAST-A-FOAM® FR-4306 polyurethane foam material as nozzle closures for its two booster rockets. These nozzle plugs securely close the rocket opening before use or ignition. It serves as a seal that controls moisture levels while ensuring nothing can get into the motor when the rocket is in storage. A unique flame-retardant structural polyurethane foam, the FR-4306 material is ideal for this critical component.
NASA’s SLS will be the most powerful rocket ever flown, as it will produce 8.8 million pounds of total thrust. The motors leverage flight-proven solid rocket boosters used on NASA’s Space Shuttle coupled with new technologies and advanced materials. A pair of the boosters, each 177 feet long, will combine with four shuttle main engines powering the rocket's core stage to blast off from Kennedy Space Center in Florida. The first SLS launch – a flight called Exploration Mission-1 that will send an unmanned Orion crew capsule around the moon – is targeted to take place in late 2018.
Assessing – and reassembling – the pieces
During analysis ATK Orbital will take apart the motor to see how it performed. An essential part of that dissection is reviewing how the nozzle closures broke apart, which was captured with cameras and mirrors. The individual pieces were collected after the test and will be evaluated for size and debris generated, to ensure that it does not damage the rocket. Orbital ATK and NASA will use test measurements to assess myriad factors and determine what modifications might be needed.
“It is very exciting to be on the forefront of deep space exploration by supplying our material and expertise to global leaders like Orbital ATK,” General Plastics Senior Account Manager, Dr. Brown stated. “We are proud to support the SLS program and contribute to these ambitious missions.”
The June 28 test was the second one aimed at qualifying the longer solid-propellant boosters for flight. It focused on testing the motor’s capabilities at lower temperatures under which the SLS may operate. Motor performance at the upper end of the expected propellant temperature range was previously validated last spring. During the next few weeks, engineers will analyze data collected from more than 500 sensors to determine if objectives were met for 82 different test objectives.
A Message from General Plastics Mfg. Co.
As Seen In CompositesWorld
Composites suppliers, fabricators respond to coronavirus
Companies across the composites industry supply chain share how the COVID-19 pandemic is affecting their businesses, and how they are available to help.
CAMX 2019 exhibit preview: General Plastics
General Plastics Manufacturing Co. is showcasing its new LAST-A-FOAM FR-4800 tooling board at its CAMX 2019 booth.
CAMX 2018 preview: General Plastics
General Plastics (Tacoma, WA, US) is featuring its new high-temperature, low-CTE LAST-A-FOAM FR-4800 tooling board.
General Plastics launches ultrahigh-temperature tooling board
General Plastics Mfg. Co. (Tacoma, WA, US) expanded its line of high-temperature tooling board materials with the introduction of LAST-A-FOAM FR-4800, an autoclave-capable, high-density epoxy-urethane foam designed for master plug manufacturing, tool proofing, vacuum form tooling, pattern making, and short-run production tooling applications.
CAMX 2017 preview: General Plastics
General Plastics Mfg. Co. (Tacoma, WA, US) is showcasing its new LAST-A-FOAM RF-2200, a lightweight material that provides an RF-transparent protective layer for radome and antenna applications.
JEC World 2017 exhibit preview
JEC World will be held March 14-16 in Paris. CW previews some of the products and technologies that will be at the show.
JEC World 2016, the full report
CompositesWorld's editors report on the technologies and products that caught our eye at JEC World 2016, in early March.
Composites 101: Tooling
Composite parts are formed in molds, also known as tools. Tools can be made from virtually any material. The material type, shape and complexity depend upon the part and length of production run. Here's a short summary of the issues involved in electing and making tools.
CFRP camera boom enables safe spill inspection
NONA Composites’ 32m REACH structure meets tight remediation schedule at DoE radioactive waste storage site.
Composite tooling without oven or autoclave
No Oven No Autoclave technology has been demonstrated in tooling for NASA, including multiple thermal cycles and use for curing epoxy infused out-of-autoclave parts.
Pierce County trains skilled workers through collaborative curriculum building
Bruce Kendall, the president and CEO of the private, nonprofit Economic Development Board (EDB) for Tacoma-Pierce County (Wash.), reports on the success of a collaborative training curriculum development program that produces skilled workersfor the aerospace industry.
Tooling boards improve processes
In the composites industry, many parts are the product of one-off or few-of-a-kind production programs. In response, tooling material suppliers today provide an increasing variety of relatively inexpensive materials grouped under the heading of tooling board.
SAMPE 2009 Product Showcase
Showgoers at the SAMPE 2009 Conference and Exhibiton in Baltimore, Md. found many suppliers undeterred by poor economic news.
Taking Up Tooling Boards
Tooling Board ManufacturersEpoxy and polyurethane tooling boards are a standby for creating models or low-run-production tooling.
SAMPE 2005 Product Showcase
SAMPE's U.S. Symposium and Exhibition highlights technological innovation and market expansion.