General Plastics Mfg. Co.
4910 Burlington Way
Tacoma , WA 98409 US
High-Temp Tooling Foam and Machining Services Help Aerospace Innovator Compress its Research and Development Cycle
General Plastics’ High-Temperature Tooling Foam and Machining Services Help Aerospace Innovator compress its Research and Development Cycle
Faster True-to-Life Prototyping Speeds New Products to Market Thanks to Expertly Machined High-Temp Tooling Board
Based in Everett, Wash., BLR Aerospace specializes in aerodynamic performance enhancements for helicopters and turbine-powered aircraft. These exterior modifications include proprietary winglet systems, dual tailboom strakes, vortex generators and its FastFin® tail-rotor enhancement and stability systems. They are sold to industry-leading OEMs, notably Beechcraft Corporation and Bell Helicopter, where they’ve become standard on helicopters and airplanes. BLR’s products are also sold in the aftermarket for retrofitting a range of aircraft. The 24-year-old company’s performance-enhancing technologies enable operators to fly higher, faster and farther, as well as more efficiently and safely.
A developer of patented technology, BLR is innovation-focused and market-driven. It identifies needs and niche opportunities, then designs and manufactures products to fulfill them. Currently, its emphasis is on bringing new helicopter products to market.
BLR Aerospace is continually developing new aerodynamic cowlings it can bring to market quickly and profitably. This necessitates ongoing research and development – including multiple iterations of composite parts to ensure they fit precise specifications and perform as intended. The company required a stable, easily machined tooling material for prototyping composite parts, specifically large-scale, true-to-life carbon fiber and fiberglass parts. Their design engineers sought an affordable alternative to more permanent tooling to allow for various design iterations, while factoring cost and time requirements. Previously, the company used metallic tools, which were time-consuming to produce and expensive. They wanted a material that was not so heavy and cumbersome to handle when laying up parts, and that would cost less to ship to their manufacturing facilities across Washington and Oregon.
- Temperature stability – at least 250˚F
- A lower-cost prototype tooling option
- Superior machinability
- Lighter-weight, easy-to-handle material
- Reduced prototyping time
- Expert machining services
One of the other materials BLR experimented with was medium-density fiberboard (MDF), which is relatively cheap and machinable. However, in use it fell short in one key thermal property: temperature stability at a minimum 250 degrees Fahrenheit. A wood-based product, the MDF tool had wild variances in tolerances, creating a lot of distortion. The resulting parts had unpredictable dimensions as well as waves and warping within the part.
The Solution: General Plastics’ LAST-A-FOAM ® FR-4700 High-Temperature Tooling Board and CNC Machining Services
After the MDF tool proved unacceptable, BLR zeroed in on General Plastics and our LAST-A-FOAM® FR-4700 High-Temperature Tooling series. According to lead project engineer Russell Bezzo, preference for General Plastics’ products within the aerospace industry drove them to investigate our materials. They determined that the FR-4700 met their specific needs, and primarily use the 30-pound material as tooling for prototyping parts that become their aerodynamic fairings.
“Machining tools using this foam allows us to lay up the carbon-fiber and composite parts, put them in the oven and make true-to-life prototypes using the actual materials that we’ll use in production,” Bezzo said.
He explains that the FR-4700 maintains the required properties, remaining very stable and uniform when it expands and contracts during the curing cycle. The foam provides excellent machinability and allows for tight tolerances, necessary in the world of prototyping. Moreover, the lower-weight tools are less cumbersome to handle when making prototypes and cost less to ship to their composite manufacturing facilities. As a result, BLR can make a single, life-size composite part and determine if it will fit or satisfy the specific need, at a substantially lower cost and in significantly less time. This is far more economical than machining large pieces of metal for a prototype tool that is used only once, ultimately wasting tens of thousands of dollars.
Beyond the performance and cost efficiencies of the FR-4730 foam, BLR takes advantage of General Plastics’ expertise and CNC machining capabilities to make its prototype tools.
According to Bezzo, this provides multiple benefits:
- The entire process is controlled within one facility.
- It expedites the timeline by cutting out the middleman. BLR doesn’t have to ship huge foam blocks to a separate shop to be machined and then ship the machined tools to another to build its parts.
- The experts who produce the foam know the materials and how to machine it best – what kind of bits and which feed rates to use, eliminating the guesswork.
“Working with the General Plastics team has been great. They are easy to reach and very fast. We email back and forth directly with the machining team,” said Bezzo. “We’ve had great results with them, and the speed and accuracy of the turnaround has been a huge plus for us.”
Overall, relying on General Plastics for both its high-temperature tooling foam and CNC machining capabilities has allowed BLR to maintain a short timeline and cost targets. They have been able to achieve tighter tolerances with their prototype FR-4700 tools.
Additionally, BLR can use the actual production material instead of a prototype material, resulting in highly accurate, true-to-life prototypes for testing and installation on aircraft. A shorter turnaround for tools means faster design and prototype iterations, compressing research and development time.
The upshot for this aerospace innovator? It gets new products to market faster and with greater cost efficiencies for a bigger business lift. So, with the performance enhancements provided by General Plastics, BLR Aerospace can fly higher, faster and farther.
- Withstands peak temperatures up to 400°F
- Supports continuous-use temperatures up to 350°F
- Highly machinable
- Consistently uniform
- Dimensionally stable
General Plastics’ CNC Machining Services:
- One-stop shop for foam production, bonding and machining
- Support any data file format
- Can work from dimensioned part drawing
- Extra-large routers for large projects
- CNC vertical milling machines for intricate details and production work
A Message from General Plastics Mfg. Co.
As Seen In CompositesWorld
CAMX 2020 exhibit preview: General Plastics
General Plastics Manufacturing Co. is showcasing its LAST-A-FOAM core products, custom molding capabilities and high-temperature, low-CTE tooling board.
Composites suppliers, fabricators respond to coronavirus
Companies across the composites industry supply chain share how the COVID-19 pandemic is affecting their businesses, and how they are available to help.
CAMX 2019 exhibit preview: General Plastics
General Plastics Manufacturing Co. is showcasing its new LAST-A-FOAM FR-4800 tooling board at its CAMX 2019 booth.
CAMX 2018 preview: General Plastics
General Plastics (Tacoma, WA, US) is featuring its new high-temperature, low-CTE LAST-A-FOAM FR-4800 tooling board.
General Plastics launches ultrahigh-temperature tooling board
General Plastics Mfg. Co. (Tacoma, WA, US) expanded its line of high-temperature tooling board materials with the introduction of LAST-A-FOAM FR-4800, an autoclave-capable, high-density epoxy-urethane foam designed for master plug manufacturing, tool proofing, vacuum form tooling, pattern making, and short-run production tooling applications.
CAMX 2017 preview: General Plastics
General Plastics Mfg. Co. (Tacoma, WA, US) is showcasing its new LAST-A-FOAM RF-2200, a lightweight material that provides an RF-transparent protective layer for radome and antenna applications.
JEC World 2017 exhibit preview
JEC World will be held March 14-16 in Paris. CW previews some of the products and technologies that will be at the show.
JEC World 2016, the full report
CompositesWorld's editors report on the technologies and products that caught our eye at JEC World 2016, in early March.
Composites 101: Tooling
Composite parts are formed in molds, also known as tools. Tools can be made from virtually any material. The material type, shape and complexity depend upon the part and length of production run. Here's a short summary of the issues involved in electing and making tools.
CFRP camera boom enables safe spill inspection
NONA Composites’ 32m REACH structure meets tight remediation schedule at DoE radioactive waste storage site.
Composite tooling without oven or autoclave
No Oven No Autoclave technology has been demonstrated in tooling for NASA, including multiple thermal cycles and use for curing epoxy infused out-of-autoclave parts.
Pierce County trains skilled workers through collaborative curriculum building
Bruce Kendall, the president and CEO of the private, nonprofit Economic Development Board (EDB) for Tacoma-Pierce County (Wash.), reports on the success of a collaborative training curriculum development program that produces skilled workersfor the aerospace industry.
Tooling boards improve processes
In the composites industry, many parts are the product of one-off or few-of-a-kind production programs. In response, tooling material suppliers today provide an increasing variety of relatively inexpensive materials grouped under the heading of tooling board.
SAMPE 2009 Product Showcase
Showgoers at the SAMPE 2009 Conference and Exhibiton in Baltimore, Md. found many suppliers undeterred by poor economic news.
Taking Up Tooling Boards
Tooling Board ManufacturersEpoxy and polyurethane tooling boards are a standby for creating models or low-run-production tooling.
SAMPE 2005 Product Showcase
SAMPE's U.S. Symposium and Exhibition highlights technological innovation and market expansion.
Blast protection for large structures
Hardening of public buildings against terrorist threats represents a potentially huge market for antiballistic composites.
Getting To The Core Of Composite Laminates
A wealth of low-cost core solutions are available for high-performance sandwich structures.