General Plastics Mfg. Co.
4910 Burlington Way
Tacoma , WA 98409 US
General Plastics Manufacturing Company Awarded Nadcap Accreditation
General Plastics received Nadcap accreditation for Measurement and Inspection for its Coordinate Measuring Machine (CMM)
TACOMA, Wash. – September 25, 2017 – General Plastics Manufacturing Company, global supplier of high-performance polyurethane foam products and composite parts, is proud to announce that it received the Nadcap accreditation for Measurement and Inspection (AC7130 Rev. 1), specifically for its Coordinate Measuring Machine (AC7130/1 Rev A.). The Nadcap designation allows General Plastics’ inclusion in the Performance Review Institute (PRI) Qualified Manufacturer’s List (QML), joining a group of only 61 companies in the nation to attain this standard.
Receiving Nadcap accreditation AC7130 Rev. A and AC7130/1 Rev. A further defines General Plastics’ commitment to provide quality products, parts and services to its customers. In addition to this accreditation, the company is certified to ISO 9001:2008/AS9100C, and meets quality systems NQA-1, MIL-I-45208A and Boeing Company D6-82479.
“The quality assurance team of General Plastics worked together to ensure that our quality system is up to the standards set by a worldwide cooperative of major companies in the aerospace, defense and automotive industries,” said General Plastics’ Quality Inspection Engineer Rob Ingham. “Passing the audit and receiving the Nadcap accreditation not only opens up the market to us, it also demonstrates our company’s commitment to satisfy customer requirements as well as the standards of quality and safety set by the industry.”
Nadcap is administered by Performance Review Institute (PRI) which is a not-for-profit globally-recognized organization that certifies special products and processes for aerospace, automotive and related industries. A select group of major companies work together to determine the requirements for accreditation in order to ensure the quality and safety standards within their sectors. The group includes, among others, Airbus, Boeing, Northrop Grumman, Rolls Royce, and Lockheed Martin.
“Achieving Nadcap accreditation is not easy: it is one of the ways in which the aerospace industry identifies those who excel at manufacturing quality product through superior special processes. Companies such as General Plastics Manufacturing Company work hard to obtain this status and they should be justifiably proud of it,” said Joe Pinto, Executive Vice President and Chief Operating Officer at the Performance Review Institute. “PRI is proud to support continual improvement in the aerospace industry by helping companies such as General Plastics be successful and we look forward to continuing to assist the industry moving forward.”
About General Plastics Manufacturing Company
Tacoma, Washington-based General Plastics Manufacturing Company has been a leading innovator in the plastics industry for 75 years. The company develops and manufactures rigid and flexible polyurethane foam products, which include its signature LAST-A-FOAM® brand series and build-to-print composite parts.
Directly or through its network of distributors, General Plastics serves the aerospace and defense, nuclear transportation packaging, composite core, prototype and modeling, construction, dimensional signage, testing, marine and the renewable energies industries. General Plastics is certified to ISO 9001:2008/AS9100C and meets the rigorous demands of numerous leading quality systems, which include NQA-1, Mil-I-45208A and Boeing Company D6-82479. Please v isit www.generalplastics.com .
A Message from General Plastics Mfg. Co.
As Seen In CompositesWorld
CAMX 2020 exhibit preview: General Plastics
General Plastics Manufacturing Co. is showcasing its LAST-A-FOAM core products, custom molding capabilities and high-temperature, low-CTE tooling board.
Composites suppliers, fabricators respond to coronavirus
Companies across the composites industry supply chain share how the COVID-19 pandemic is affecting their businesses, and how they are available to help.
CAMX 2019 exhibit preview: General Plastics
General Plastics Manufacturing Co. is showcasing its new LAST-A-FOAM FR-4800 tooling board at its CAMX 2019 booth.
CAMX 2018 preview: General Plastics
General Plastics (Tacoma, WA, US) is featuring its new high-temperature, low-CTE LAST-A-FOAM FR-4800 tooling board.
General Plastics launches ultrahigh-temperature tooling board
General Plastics Mfg. Co. (Tacoma, WA, US) expanded its line of high-temperature tooling board materials with the introduction of LAST-A-FOAM FR-4800, an autoclave-capable, high-density epoxy-urethane foam designed for master plug manufacturing, tool proofing, vacuum form tooling, pattern making, and short-run production tooling applications.
CAMX 2017 preview: General Plastics
General Plastics Mfg. Co. (Tacoma, WA, US) is showcasing its new LAST-A-FOAM RF-2200, a lightweight material that provides an RF-transparent protective layer for radome and antenna applications.
JEC World 2017 exhibit preview
JEC World will be held March 14-16 in Paris. CW previews some of the products and technologies that will be at the show.
JEC World 2016, the full report
CompositesWorld's editors report on the technologies and products that caught our eye at JEC World 2016, in early March.
Composites 101: Tooling
Composite parts are formed in molds, also known as tools. Tools can be made from virtually any material. The material type, shape and complexity depend upon the part and length of production run. Here's a short summary of the issues involved in electing and making tools.
CFRP camera boom enables safe spill inspection
NONA Composites’ 32m REACH structure meets tight remediation schedule at DoE radioactive waste storage site.
Composite tooling without oven or autoclave
No Oven No Autoclave technology has been demonstrated in tooling for NASA, including multiple thermal cycles and use for curing epoxy infused out-of-autoclave parts.
Pierce County trains skilled workers through collaborative curriculum building
Bruce Kendall, the president and CEO of the private, nonprofit Economic Development Board (EDB) for Tacoma-Pierce County (Wash.), reports on the success of a collaborative training curriculum development program that produces skilled workersfor the aerospace industry.
Tooling boards improve processes
In the composites industry, many parts are the product of one-off or few-of-a-kind production programs. In response, tooling material suppliers today provide an increasing variety of relatively inexpensive materials grouped under the heading of tooling board.
SAMPE 2009 Product Showcase
Showgoers at the SAMPE 2009 Conference and Exhibiton in Baltimore, Md. found many suppliers undeterred by poor economic news.
Taking Up Tooling Boards
Tooling Board ManufacturersEpoxy and polyurethane tooling boards are a standby for creating models or low-run-production tooling.
SAMPE 2005 Product Showcase
SAMPE's U.S. Symposium and Exhibition highlights technological innovation and market expansion.
Blast protection for large structures
Hardening of public buildings against terrorist threats represents a potentially huge market for antiballistic composites.
Getting To The Core Of Composite Laminates
A wealth of low-cost core solutions are available for high-performance sandwich structures.