General Plastics Mfg. Co.
4910 Burlington Way
Tacoma , WA 98409 US
General Plastics Debuts Polyurethane Dielectric Material with High Thermal Processing Properties for RF Communications and Radome Applications
LAST-A-FOAM® RF-2200 series offers high-performance, lightweight insulative material with superb dimensional stability for protecting sensitive electronics in high-reliability environments.
TACOMA, Wash. – General Plastics Manufacturing Company, a global supplier of high-performance polyurethane foam products and composite parts, today introduced its advanced dielectric foam material for use in radomes, antennas and other critical radio frequency (RF) communication systems. The new LAST-A-FOAM® RF-2200 rigid foam series addresses the need for an RF-transparent protective layer with extended thermal processing capabilities. Initially offered at 3, 4 and 6 pounds per cubic foot sheets and blocks, the foam’s density may be tailored to other values to meet user’s specific dielectric constant and loss tangent requirements. It also provides a finer cell structure compared to some thermoplastic materials, as well as high dimensional tolerances and thermal stability, which are critical when creating sandwich panels and complex shapes to tight tolerances.
“As composites have become increasingly commonplace for lightweight structures, our new RF-2200 series is another example of how General Plastics looks at a wide spectrum of solutions to solve customers’ very technical problems,” said General Plastics President Mitch Johnson, Ph.D. “These low-density, high-strength foams are a solid step forward in processing higher-temperature composite prepregs, particularly for radomes and other radio frequency panels. Now customers have a core material to match and exceed their required properties.”
Greater performance and versatility
These materials are commonly used in sandwich panel configurations, which require elevated cure temperatures to press the material into panels. “The RF-2200 series foams are formulated with a Tg exceeding 350ºF, dramatically increasing their processing capabilities,” said General Plastics Head Engineer Joel Meyer, Ph.D. This means a high-temperature prepreg can be thermally-cured to easily form a panel with better dimensional stability than previously possible.
LAST-A-FOAM® RF-2200 is available in sheets and blocks as well as machined final core configurations. General Plastics can also produce extremely large blocks, enabling customers to create very complex shapes. This represents a significant advantage over other materials which are available only in thinner sheets. Customers who rely on such products are limited to bonding sheets together, resulting in potentially problematic density gradients from sheet to sheet.
General Plastics’ newest foam series expands on the FR-3700 Performance Core and FR-7100 Multi-Use Foam series products currently used in radomes, all of which deliver proven transparency and structural durability with negligible impact on signal strength. In addition to supporting higher processing temperatures, the new RF-2200 materials provide a finer, more uniform cell shape compared to other offerings. This homogenous cell structure improves signal transmission and reception without interference from the surrounding material. These properties also enable the RF-2200 foams to protect sensitive electronics with an insulative material.
Expanding design opportunities
General Plastics has comprehensively characterized all of these polyurethane foams, giving it the ability to supply custom densities to satisfy the customer’s specific dielectric property requirements. “If a customer comes to us and requests a material with a dielectric constant of 1.15 that they can drop into their design, we can tailor a material to meet that requirement,” Dr. Meyer said.
And, by demonstrating that the material is completely non-dispersive, the company can certify the dielectric constant of its material at specified frequencies. Certifications of performance of a specific sheet of material can be supplied upon request.
Protecting communications signals
As very high-performing electronics and communications become more pervasive, it is imperative to eliminate any holes in communication regardless of environment. An insulative material that will not interfere with signal transmission or the electronics inside the devices are required for radomes and electronic devices based on land, water or air. These devices must be physically protected throughout the program’s life span from environmental elements such as rain, wind, dust, hail and other damaging impact.
Because LAST-A-FOAM® products are closed-cell polyurethanes, they do not absorb water. No matter whether these durable, low-cost materials for RF applications are exposed to rain, snow, sea spray or other moisture, their dielectric performance is undiminished.
“Whether they sit on towers or moving structures – cars, trains, buses and boats, commercial and private aircraft – we are seeing an explosion in the need for installed electronics used for wireless communications,” Dr. Johnson said. “While the vehicles and locations vary, the common thread is that all of those applications are using composites. Our new RF-2200 dielectric series foams and technical expertise equip General Plastics’ customers with the affordable, flexible solutions they need to satisfy their requirements.”
About General Plastics Manufacturing Company
Tacoma, Washington-based General Plastics Manufacturing Company has been a leading innovator in the plastics industry for 75 years. The company develops and manufactures rigid and flexible polyurethane foam products, which include its signature LAST-A-FOAM® brand series and build-to-print composite parts.
Directly or through its network of distributors, General Plastics serves the aerospace and defense, nuclear transportation packaging, composite core, prototype and modeling, construction, dimensional signage, testing, marine and the renewable energies industries. General Plastics is certified to ISO 9001:2008/AS9100C and meets the rigorous demands of numerous leading quality systems, which include NQA-1, Mil-I-45208A and Boeing Company D6-82479. Please visit www.generalplastics.com.
A Message from General Plastics Mfg. Co.
As Seen In CompositesWorld
Composites suppliers, fabricators respond to coronavirus
Companies across the composites industry supply chain share how the COVID-19 pandemic is affecting their businesses, and how they are available to help.
CAMX 2019 exhibit preview: General Plastics
General Plastics Manufacturing Co. is showcasing its new LAST-A-FOAM FR-4800 tooling board at its CAMX 2019 booth.
CAMX 2018 preview: General Plastics
General Plastics (Tacoma, WA, US) is featuring its new high-temperature, low-CTE LAST-A-FOAM FR-4800 tooling board.
General Plastics launches ultrahigh-temperature tooling board
General Plastics Mfg. Co. (Tacoma, WA, US) expanded its line of high-temperature tooling board materials with the introduction of LAST-A-FOAM FR-4800, an autoclave-capable, high-density epoxy-urethane foam designed for master plug manufacturing, tool proofing, vacuum form tooling, pattern making, and short-run production tooling applications.
CAMX 2017 preview: General Plastics
General Plastics Mfg. Co. (Tacoma, WA, US) is showcasing its new LAST-A-FOAM RF-2200, a lightweight material that provides an RF-transparent protective layer for radome and antenna applications.
JEC World 2017 exhibit preview
JEC World will be held March 14-16 in Paris. CW previews some of the products and technologies that will be at the show.
JEC World 2016, the full report
CompositesWorld's editors report on the technologies and products that caught our eye at JEC World 2016, in early March.
Composites 101: Tooling
Composite parts are formed in molds, also known as tools. Tools can be made from virtually any material. The material type, shape and complexity depend upon the part and length of production run. Here's a short summary of the issues involved in electing and making tools.
CFRP camera boom enables safe spill inspection
NONA Composites’ 32m REACH structure meets tight remediation schedule at DoE radioactive waste storage site.
Composite tooling without oven or autoclave
No Oven No Autoclave technology has been demonstrated in tooling for NASA, including multiple thermal cycles and use for curing epoxy infused out-of-autoclave parts.
Pierce County trains skilled workers through collaborative curriculum building
Bruce Kendall, the president and CEO of the private, nonprofit Economic Development Board (EDB) for Tacoma-Pierce County (Wash.), reports on the success of a collaborative training curriculum development program that produces skilled workersfor the aerospace industry.
Tooling boards improve processes
In the composites industry, many parts are the product of one-off or few-of-a-kind production programs. In response, tooling material suppliers today provide an increasing variety of relatively inexpensive materials grouped under the heading of tooling board.
SAMPE 2009 Product Showcase
Showgoers at the SAMPE 2009 Conference and Exhibiton in Baltimore, Md. found many suppliers undeterred by poor economic news.
Taking Up Tooling Boards
Tooling Board ManufacturersEpoxy and polyurethane tooling boards are a standby for creating models or low-run-production tooling.
SAMPE 2005 Product Showcase
SAMPE's U.S. Symposium and Exhibition highlights technological innovation and market expansion.