Composite Polymer Design/Endurance Technologies
275 Bridge Point Dr.
S. St. Paul , MN 55075 US
- Visit Company Website
- (800) 755-8568
As Seen In CompositesWorld
It’s time to plan your Wisconsin trip: Oshkosh 2018 is coming
The annual EAA AirVenture event is an air show/aircraft exhibition/trade show/learning opportunity/history lesson/concert venue/giant campout/Wisconsin bratfest and more. As in past years, composites industry expert and CW contributor Russ Emanis will spearhead a composites fabrication demonstration during the show.
People on the Move: June 2018
CW’s monthly roundup of people on the move in the composites industry.
Aviation’s big US show: Oshkosh 2017 highlights
The 2017 edition of the Experimental Aircraft Assn.’s (EAA) AirVenture airshow event, held in Oshkosh, WI, US, from July 24 – 30, was another blockbuster.
Oshkosh’s AirVenture 2016 included a big infusion event
The big annual airshow featured the on-site infusion of complete aircraft fuselages for two kit aircraft.
Oshkosh “Fly-In” preview: Multi-day infusion demo
Visitors to the Experimental Aircraft Assn.’s (EAA) AirVenture 2016 (July 25-31) will have the opportunity to attend a reprise of last year’s multi-day infusion processing demo, again sponsored by Innegra Technologies (Greenville, SC, US).
Composites in tornado shelters
A new design aims to defeat the threat from debris, both as heavy piles preventing exit and as projectiles traveling at ballistic speeds.
Infusion of aerostructures: Doubling down on the details
For this carbon-fiber composite manufacturer, little things make big differences in a not-quite-new but still novel double-bag infusion technique.
Single vs. double-bagged infusion
Russell Emanis (JB Martin, St.
Double-bag infusion: 70% fiber volume?
A double vacuum-bag system and tight process control enable repeatable fiber volumes of 60 to 70 percent and improves consistency of infused laminates.
IBEX 2010: Looking up in Louisville
A new location helps regenerate a recession-battered industry, drawing in more exhibitors and attendees than in 2009.
SAMPE ’08 technology showcase
Billed as the world’s largest advanced materials trade event, SAMPE’s 2008 Symposium and Exhibition returned to Long Beach.
Small-scale blade manufactured via bladder molding
High-compression bladder molding and modular tooling prove cost-effective for manufacture of small wind turbine rotor blades.
- Matrix resins, thermoset
- Epoxy, 250 F cure
- Epoxy, 350 F cure
- Epoxy, toughened
- Epoxy, Foam
- Epoxy, Paste
- Epoxy, Other
- Urethane, Foam
- Urethane, Paste
- Urethane, Other
- Other, Paste
- Casting resins
- Other casting resins
- Fairing compounds (formerly paste systems)
- Catalysts, promoters and curing agents
- Curing agents, amines
- Tooling equipment, materials and supplies
- Flexible mold materials
- Master pattern material, polymeric
- Master pattern material, other