Evonik Corporation

Its products can be found in many components of fiber-reinforced composites. Supplies core materials for sandwich construction, thermoplastic and thermosetting resin matrices, and also essential components for matrices: crosslinkers, catalysts, impact strength modifiers and processing and process additives.

299 Jefferson Rd.
Parsippany, NJ 07054 US

Additional Locations:
914 E. Randolph Rd.
Hopewell, VA 23860 US
(804) 541-8658

Turner Place 2
Piscataway, NJ 08855 US
(732) 981-5015

Evonik Jayhawk Fine Chemicals, 8584 S.E. Jayhawk Dr.
Galena, KS 66739 US
(620) 783-1321

Industrial Chemicals


As Seen In CompositesWorld

Evonik launches composite polymers for enhancing performance of bone fixation devices
RESOMER composites feature precise degradation rate profiles and mechanical properties such as elastic modulus that can be tailored to match the natural bone.

Composites bucking the market trend in M&A
During 2015 and 2016, the composites industry saw such impressive activity in mergers and acquisitions, it was perhaps to be expected that, in 2017, we would see a dip in transaction levels, especially given the global regulatory uncertainty and the impact that might have on larger, more complex deals.

CFRP bests steel in precision ball joints
Near-zero backlash in bearings and automation components.  

Plant Tour: BENTELER SGL, Ort im Innkreis, Austria
High-volume CFRP structures pioneer makes industrialization and multimaterial assembly look easy.

KraussMaffei presents continuous pultrusion system
More than 200 visitors witness presentations and the live debut at the KraussMaffei Competence Day Pultrusion.

Wait, wait, there’s more: JEC 2017
There’s never enough time to see everything at the JEC World event, and this year the problem was even worse. Here’s more information on new products and companies, from Paris…

Evonik, Forward Engineering establish joint venture
The joint venture will focus on the development of composite solutions for automotive serial production. 

Evonik develops new PulPress process for mass-production of molded composite parts
The company says that molded parts made using PulPress will soon be going into mass production.

CAMX 2016 Show Report
The 3rd annual joint ACMA/SAMPE-sponsored trade event comes to Anaheim with an exhibition and conference program attractive to professionals across the composites world.

Evonik is conducting research on biodegradable composites
The research is focused on new composite materials for the fixation of fractured bones.

Day One highlights from 2016 CFK Valley Stade Conference
Automotive and aerospace developments led Day One including bio-inspired designs, BMW 7 Series firsts and amping GLARE fuselage production to meet 70 aircraft/month.

Fine-tuning fiberglass: Smart fiber sizing
Some insights into those proprietary chemistries that can customize performance at the fiber/resin interface.

EPTA’s World Pultrusion Conference spotlights innovation
The European Pultrusion Technology Assn. (EPTA) held its bi-annual World Pultrusion Conference, March 3-4, in Prague, Czech Republic.

Reducing manufacturing cost via RTM
Airbus Bremen aims to replace dozens of prepreg components and assembly operations with a unitized multispar composite flap molded in a one-shot process.

Fan cowls replace aluminum honeycomb with foam core
Bombardier is using Evonik's ROHACELL foam core to fabricate composite fan cowl doors for the Rolls-Royce BR710 and the Pratt & Whitney V2500 engines.

Evonik invests in Airborne Oil & Gas
Evonik's venture capital arm cites Airborne's strong track record producing thermoplastic composite piping for oil and gas exploration and delivery applications.

Record-breaking land speed bicycle built with composites
The use of carbon fiber with Scott Bader’s Crestapol 1250LV infusion resin inside and out of the ARION1 land speed bicycle was extensive to achieve the strength to weight ratio needed for this type of speed challenge vehicle.

CFK-Valley Stade Convention 2015 report
The composites industry in Germany is preparing for the 4th Industrial Revolution.

3D foam core for complex shapes
Evonik Industries AG (Essen, Germany) showcased at JEC Europe 2015 a new cost-effective manufacturing method for 3D shaped foam cores, intended for carbon fiber automotive parts.

BMW i8

Slideshow: Scenes from JEC Europe 2015
The entire composites value chain recently embarked onto the City of Light for JEC Europe 2015 (March 10-12). The largest trade show for the industry continues to grow in size, with exhibitors and visitors up by a reported 13%, according to the show organizer, JEC Group. As expected, there was plenty of new technology, applications and innovation proudly displayed at the show. Click through the slideshow to see some of the highlights CW found when walking the show floor.

Product Categories of Evonik Corporation

  • Matrix resins, thermoplastic
    • Methyl methacrylate
    • Nylon (polyamide)
    • Polyether ketone family (PEK, PEKK, PEEK)
  • Matrix resins, thermoset
    • Acrylic
    • Bismaleimide (BMI)
    • Urethane
    • Other thermosets
    • Epoxy
      • Epoxy, 250 F cure
      • Epoxy, 350 F cure
      • Epoxy, toughened
  • Prepregs, thermoplastic
    • Tape
  • Adhesives
    • Epoxy
      • Epoxy, Paste
      • Epoxy, Solvent-based
    • Urethane
      • Urethane, Paste
      • Urethane, Solvent-based
  • Core materials and flow media
    • Foam core
      • Foam core, polymethacrylimide (PMI)
  • Coatings and sizings
    • Decorative
    • In-mold
    • Paint
    • Powder
    • Protective
    • Sizings
  • Casting resins
    • Epoxy
  • Catalysts, promoters and curing agents
    • Curing agents, amines
    • Curing agents, others
    • Hardeners
    • Other catalysts/promoters
  • Resin additives & modifiers
    • Coupling agents
    • Nanomaterials (carbon nanotubes, fullerenes, etc.)
    • UV stabilizers
    • Other additives/modifiers
Tools/tooling materials
  • Tools
    • Composite
      • Composite, prepreg