Cotronics Corp.
High-temperature epoxy and ceramic adhesives, conductive adhesives, putties, machinable and castable ceramics, repair products and insulation.As Seen In CompositesWorld
Epoxy Adhesive - 1/1/2006
Cotronics Corp. (Brooklyn, N.Y.) recently introduced Duralco 4700HT, an advanced epoxy designed to cure without out-gassing to provide good adhesion, high electrical resistance, high temperature stability, low shrinkage and good resistance to solvents and other chemicals as well as radiation. Intended for
Ceramic adhesive
Cotronics Corp. (Brooklyn, N.Y.) is offering Resbond 940, a customizable series of fast setting, 1649°C/3000°F adhesives that offer good chemical and thermal shock resistance. Adhesives are available in metal-based and electrically or thermally conductive grades that can provide low to high thermal expansion,
Ceramic paper
Cotronics Corp. (Brooklyn, N.Y.) has introduced a high purity, 300 ceramic paper, with a continuous service temperature of 1371°C/2500°F. It offers high-temperature stability, high dielectric strength, low specific heat, low thermal conductivity and good resistance to corrosion and thermal shock. It can be cut with
High-temperature repair putty
Cotronics Corp. (Brooklyn, N.Y.) has introduced Durabond 454, a new, extreme-temperature repair putty that cures ambiently to form a machinable composite. The putty does not out-gas, contains no volatiles or solvents and requires no complicated two- or three-stage curing cycles. The product bonds to high-performance
High-temp adhesive handbook
Cotronics Corp. (Brooklyn, N.Y., U.S.A.) has released its High Temperature Adhesives Guide, written for electrical, structural and industrial applications. It is reportedly the company's most up-to-date resource for high-temperature adhesives. Features include user reports, technical data, and photographs that
- Matrix resins, thermoset
- Epoxy
- Epoxy, 250 F cure
- Epoxy, 350 F cure
- Epoxy, toughened
- Epoxy
- Matrix materials, other
- Ceramic
- Metallic
- Fabrics, unimpregnated
- Aramid
- Aramid, Plain-weave
- Aramid, Other
- Aramid/glass hybrid
- Aramid/glass hybrid, Plain-weave
- Aramid/glass hybrid, Other
- C-glass
- C-glass, Plain-weave
- C-glass, Other
- Carbon
- Carbon, Plain-weave
- Carbon, Other
- Carbon/aramid hybrid
- Carbon/aramid hybrid, Plain-weave
- Carbon/aramid hybrid, Other
- Carbon/glass hybrid
- Carbon/glass hybrid, Plain-weave
- Carbon/glass hybrid, Other
- Ceramic
- Ceramic, Plain-weave
- Ceramic, Other
- E-Glass
- E-Glass, Plain-weave
- E-Glass, Other
- Metallized
- Metallized, Plain-weave
- Metallized, Other
- Structural high-strength glass (S- and R-type)
- Structural high-strength glass (S- and R-type), Plain-weave
- Structural high-strength glass (S- and R-type), Other
- Other unimpregnated fabrics
- Other, Plain-weave
- Other, Other
- Aramid
- Adhesives
- Acrylic
- Acrylic, Paste
- Acrylic, Water-based
- Acrylic, Other
- Bismaleimide
- Bismaleimide, Paste
- Bismaleimide, Water-based
- Bismaleimide, Other
- Cyanoacrylate
- Cyanoacrylate, Paste
- Cyanoacrylate, Water-based
- Cyanoacrylate, Other
- Epoxy
- Epoxy, Paste
- Epoxy, Water-based
- Epoxy, Other
- Nylon
- Nylon, Paste
- Nylon, Water-based
- Nylon, Other
- Phenolic
- Phenolic, Paste
- Phenolic, Water-based
- Phenolic, Other
- Polyimide
- Polyimide, Paste
- Polyimide, Water-based
- Polyimide, Other
- Silicone
- Silicone, Paste
- Silicone, Water-based
- Silicone, Other
- Urethane
- Urethane, Paste
- Urethane, Water-based
- Urethane, Other
- Other
- Other, Paste
- Other, Water-based
- Other, Other
- Acrylic
- Coatings and sizings
- Protective
- Casting resins
- Epoxy
- Resin additives & modifiers
- Conductive fillers
- Other additives/modifiers
- Tooling equipment, materials and supplies
- Ceramic/ceramic powder
- Release agents
- Release agents, sprays