Coriolis Composites SAS

Provides robotic cells and software for fiber placement systems used to make components for commercial aircraft, automotive systems, wind turbines and yachts components.

Z.A. du Mourillon
rue Condorcet
Queven, F-56530 FR

Additional Locations:
6100 219th St. W Suite 480
Mountlake terrace, WA 98043 US
+1 240 676 3127

1111, BD Dr. Frederik Philips 6e étage
saint Laurent, QC H4M 2X6 CA

Am Technologiezentrum 5
Augsburg, 86159 DE
+49 0821 80 90 30 90

Connect

As Seen In CompositesWorld

carbon fiber

Consortium targets solutions for carbon fiber thermoplastic composite structures
The HAICoPAS project, led by Hexcel and Arkema, aims to optimize UD tape design and manufacture for aerospace and automotive composites.

National Composites Centre purchases Coriolis C5 robotic gantry AFP
Developed for rate production of large, complex composite structures, C5 will be part of world’s most advanced, flexible dry-fiber deposition cell.

automated fiber placement (AFP) and automated tape laying (ATL) composites simulation

CGTech joins NIAR to support ATLAS research
CGTech's AFP/ATL programming and simulation software will be used to support ATLAS aerospace composites research at the National Institute of Aviation Research.

Stelia Aerospace

Plant Tour: STELIA Aerospace, Méaulte, France
Supplier of Airbus fuselage sections pushes boundaries of hybrid aerostructures production, assembly and thermoplastic composites.

Fiber Placement Center acquires new partners Cevotec and Coriolis Composites

The Fiber Placement Center of SGL Carbon and Fraunhofer IGCV add Cevotec and Coriolis Composites as partners
Cevotec and Coriolis Composites will contribute their own fiber placement and automation technologies to the FPC facility, which recently celebrated its one-year anniversary.

Coriolis/Victrex thermoplastic tap ATL/AFP, JEC World 2019

JEC World 2019 preview: Victrex and Coriolis
Victrex (Thornton Cleveleys, U.K., 5/S29) and Coriolis Composites (Queven, France, 6/A32) are announcing cooperative work they did with thermoplastic unidirectional tape (TP UDT) prepreg lay-up and consolidation to improve the manufacturing efficiency of composite parts.

filament winding

New technologies and markets at World of Filament Winding event
Nov. conference features winding developments with robots, automated fiber placement, additive manufacturing and emerging markets.

Automated Fiber Placement, AFP

NIAR selects Coriolis Composites to provide thermoplastics capable AFP system
The new system will contribute to NIAR’s technology development efforts in the area of three-dimensional thermoplastics automation.

fiber placement center

FPC to explore new production concepts for lightweight components
SGL Carbon and Fraunhofer IGCV have officially opened a new Fiber Placement Center in Meitingen, Germany.

Robotic filament winding equipment developed by MF TECH

Coriolis Group acquires filament winding specialist MF TECH
Parent company of Coriolis Composites completes first external growth operation, strengthening its industrial robotics for composites manufacturing.

Irkut

Infused wing sheds light on aerocomposites future
In the Irkut MS-21 infused and co-cured wings, the aerocomposites industry gets a glimpse of how out-of-autoclave technologies might be applied to primary aircraft structures.

Israel Aerospace Industries (IAI)

Israel’s aerodefense cornerstone poised for greater global outreach
Israel Aerospace Industries (IAI) is developing increasing expertise both in and out of the autoclave as it expands an already broad composites production portfolio.

Thermoplastic composites: Past the tipping point?
The manufacturing world watched a decade ago as automatically placed thermoset composite tapes replaced aluminum in commercial airframes and made composites a household word in markets around the world. Has the time come for thermoplastic composite tapes to make a similar impact?

automated preforming composites

Automated Preforming, Part 6: Coriolis Composites
Pioneer in automated fiber placement (AFP) advances preforms for overmolded thermoplastic composites enabling production of one automotive part every 20 seconds.

Voith Composites automated composites production for Audi A8 rear wall

Automation, automotive, recycling and more from JEC World 2018
Mass production of automotive composites, recycling and composites in shipbuilding are just some of the themes from this year’s JEC.

Consolidating thermoplastic composite aerostructures in place, Part 2
Thermoplastic composite structures could eliminate the autoclave and fasteners, but will a one- or two-step process prevail?

Consolidating thermoplastic composite aerostructures in place, Part 1
After more than 30 years of development, in-situ consolidation is nearing its promise to eliminate fasteners and the autoclave, and enable an integrated, multifunctional airframe.

Thermoplastic composite demonstrators — EU roadmap for future airframes
There is a TPC development roadmap in Europe, supported by Airbus and a variety of aerospace consortia, and involving almost every major aerostructures supplier in Europe.

Quilted Stratum Process production line at Cetim

Automated Preforming, Part 3: Quilted Stratum Process
CW’s tour of Cetim and the QSP line which preforms multi-thickness thermoplastic materials in 40-90 seconds for composite parts with cycle times of 1-2 minutes.

preforming

Automated Preforming, Part 1: Numbers and Landscape
CW’s multi-blog series on preforming begins with an overview and quick look at the numbers: 1-minute take time, 10-15 seconds per layer, 490-kg/hr and 3.5 million parts/year. Are you ready for serial CFRP production?

JEC World 2016, the full report
CompositesWorld's editors report on the technologies and products that caught our eye at JEC World 2016, in early March.

Product Categories of Coriolis Composites SAS

Primary manufacturing equipment
  • Automated fiber placement machines
Auxiliary processing equipment, repair equipment, and supplies
  • Auxiliary processing equipment
    • CAD/CAM/CAE hardware/software
    • Computer controls and software
    • Robotic handling equipment