Cannon USA Inc.

Complete line of low- and high-pressure metering equipment and mixheads in the industry with basic or high-level controls. Also offers complete turnkey systems with robotics, clamps, turntables or carousels.

1235 Freedom Rd.
Cranberry Township, PA 16066-4949 US

Connect

As Seen In CompositesWorld

Fast and Faster: Rapid-cure resins drive down cycle times
New systems include sub-1-minute cures ideal for higher automotive production volumes.

Composites 2018: A multitude of markets
The composites industry, in general, continued to show health and growth, powered particularly by its aerospace, automotive and wind energy sectors.

The carbon fiber reclaimed from waste.

Composites recycling: Gaining traction
Recycling of carbon fiber, glass fiber and — at last — resins, is growing as new players enter the space.

Another opportunity to meet, and learn, in Paris
At the JEC World 2017, improvements in materials and processes were present at nearly every stand, with the emphasis on automotive-capable production speeds.

Fabrication methods (2017)
There are numerous methods for fabricating composite components. Selection of a method for a particular part, therefore, will depend on the materials, the part design and end-use or application. Here's a guide to selection.

JEC World 2016 exhibition and product previews
JEC World 2016 will be held in Paris March 8-10. These are some of the products that will be found at the show.

Cannon to supply composite equipment for Chinese electric cars
The project is for the production of lightweight composite parts for new electric cars to be made in China.

Wet compression molding
Old process updated and automated to offer lower cycle time and cost in BMW 7 Series plus potential for void-free, 65% fiber volume composite parts.

Cannon gives update on recycled carbon fiber project
CRESIM is a pilot project to develop carbon fiber composite structures manufactured from recycled carbon fiber.

Mubea Carbo Tech: High-quality auto composites go high-volume
Known for its precision and technical acumen in CFRP motorsports structures, MCT draws from its steel auto parts parent to push high-performance and industrial production to new plateaus.

The rise of HP-RTM
Decades of development have propelled it to prominence but its future demands industrial solutions for handling cost, complexity and process control.

2014 JEC Europe Review
The composites world met again in Paris, vibrant, stronger, and more forward-looking than ever before.

Cannon supplies composite processing equipment to Benteler
Benteler SGL has selected Cannon as an equipment partner, for production of carbon fiber composites for BMW.

High-speed compression molding for automotive
Cannon SpA introduced at JEC Europe 2013 its new Liquid Lay-down process, a high-speed compression molding technology marketed as an alternative to resin transfer molding (RTM) for the manufacture of automotive parts and structures.

JEC Europe 2013 new product showcase
The JEC Europe 2013 trade show (March 12-14, at the Paris Expo, Porte de Versailles, Paris, France) was the venue for introductions of a large number of new composite materials, technologies and manufacturing processes. Here's the CT editorial staff's compilation of what was on display.

Production auto composites: Progress on body panels and passenger cells
Acceptance and incorporation of composite materials into production automobiles and trucks is growing.

JEC 2013 at first blush
CT Editor-in-chief Jeff Sloan risks some immediate reactions to his week in Paris at the JEC Europe 2013 composites trade show.

Cannon launches high-speed composites injection manufacturing pilot project
Cannon Afros has launched CRESIM, a pilot project to develop carbon fiber composite structures manufactured from recycled carbon fiber using a new high-speed injection process for automotive, transportation and other end markets.

Cannon Group launches high-speed process for automotive composites
Carbon fiber/epoxy work cell in Europe is producing parts for a passenger cell on a 2013 passenger vehicle.

Product Categories of Cannon USA Inc.

Primary manufacturing equipment
  • Foam application equipment
  • Preform manufacturing equipment
  • Reaction injection molding equipment (RIM, RRIM, SRIM)
  • Resin transfer molding equipment (RTM)
  • Spray booths
  • Spray guns
  • Vacuum formers
  • Vacuum-assisted resin transfer molding equipment (VARTM
  • Presses
    • Presses, compression molding
    • Presses, hydraulic
    • Presses, low-pressure
    • Presses, thermoforming/pressure forming
Tools/tooling materials
  • Tools
    • RTM/resin infusion
Auxiliary processing equipment, repair equipment, and supplies
  • Auxiliary processing equipment
    • Metering/dispensing equipment
    • Robotic handling equipment
Fiber converting/prepreg manufacturing equipment
  • Preform manufacturing equipment
Design, testing, consulting, other services
  • Repair services, equipment and machines