Cannon USA Inc.

1235 Freedom Rd.
Cranberry Township , PA 16066 US

Connect

As Seen In CompositesWorld

Fast and Faster: Rapid-cure resins drive down cycle times

Fast and Faster: Rapid-cure resins drive down cycle times
New systems include sub-1-minute cures ideal for higher automotive production volumes.

The carbon fiber reclaimed from waste.

Composites recycling: Gaining traction
Recycling of carbon fiber, glass fiber and — at last — resins, is growing as new players enter the space.

Another opportunity to meet, and learn, in Paris

Another opportunity to meet, and learn, in Paris
At the JEC World 2017, improvements in materials and processes were present at nearly every stand, with the emphasis on automotive-capable production speeds.

vacuum infusion

Fabrication methods
There are numerous methods for fabricating composite components. Selection of a method for a particular part, therefore, will depend on the materials, the part design and end-use or application. Here's a guide to selection.

JEC World 2016 exhibition and product previews
JEC World 2016 will be held in Paris March 8-10. These are some of the products that will be found at the show.

Wet compression molding

Wet compression molding
Automated process cuts cycle time and cost for CFRP parts with potential for 65% fiber volume via Dynamic Fluid Compression Molding variant.

Mubea Carbo Tech: High-quality auto composites go high-volume
Known for its precision and technical acumen in CFRP motorsports structures, MCT draws from its steel auto parts parent to push high-performance and industrial production to new plateaus.

The rise of HP-RTM
Decades of development have propelled it to prominence but its future demands industrial solutions for handling cost, complexity and process control.

2014 JEC Europe Review
The composites world met again in Paris, vibrant, stronger, and more forward-looking than ever before.

JEC Europe 2013 new product showcase
The JEC Europe 2013 trade show (March 12-14, at the Paris Expo, Porte de Versailles, Paris, France) was the venue for introductions of a large number of new composite materials, technologies and manufacturing processes. Here's the CT editorial staff's compilation of what was on display.

JEC 2013 at first blush
CT Editor-in-chief Jeff Sloan risks some immediate reactions to his week in Paris at the JEC Europe 2013 composites trade show.

Auto composites quest: One-minute cycle time?
Faced with high fuel prices and ever-more stringent restrictions on tailpipe emissions, automakers are taking composites into their own hands.

JEC Europe 2012 Paris
A big, busy show and a big variety of new developments boded well for the industry’s future.

JEC Europe 2012 report
A big, busy show and a big variety of new developments boded well for the industry’s future.

Lightweighting a heavyweight
Process combination produces significantly lighter overhead storage bins for big-rig sleeper cabs.

hot_tub_1

Polyurethane long fiber technology (LFT) replaces wood in spa surround
To many consumers, the thought of a relaxing soak in a hot tub is mighty appealing — but the thought of spa maintenance, particularly replacing rotted wood in the spa's cabinet-like enclosure, probably isn't. For spa manufacturer Clearwater Spas (Woodinville, Wash.), that reality and the fact that building decorativ

Product Categories of Cannon USA Inc.

Foam application equipment
Metering/dispensing equipment
Preform manufacturing equipment
Preform manufacturing equipment
Presses, compression molding
Presses, hydraulic
Presses, low-pressure
Presses, thermoforming/pressure forming
Reaction injection molding equipment (RIM, RRIM, SRIM)
Repair services, equipment and machines
Resin transfer molding equipment (RTM)
Robotic handling equipment
RTM/resin infusion
Spray booths
Spray guns
Vacuum formers
Vacuum-assisted resin transfer molding equipment (VARTM