Cannon USA
1235 Freedom Rd.
Cranberry Township, PA 16066 US
724-772-5600
cannonusa.com
About Cannon USA
Complete line of low- and high-pressure metering equipment and mixheads in the industry with basic or high-level controls. Also offers complete turnkey systems with robotics, clamps, turntables or carousels.
IS THIS YOUR COMPANY?
As Seen On CompositesWorld
Cannon USA Supplies the Following Products
- Foam application equipment
- Metering/dispensing equipment
- Preform manufacturing equipment
- Preform manufacturing equipment
- Presses, compression molding
- Presses, hydraulic
- Presses, low-pressure
- Presses, thermoforming/pressure forming
- Reaction injection molding equipment (RIM, RRIM, SRIM)
- Repair services, equipment and machines
- Resin transfer molding equipment (RTM)
- Robotic handling equipment
- RTM/resin infusion
- Spray booths
- Spray guns
- Vacuum formers
- Vacuum-assisted resin transfer molding equipment (VARTM
Editorial, News, and Products
-
Cannon Tipos, Coriolis Composites mold complex automotive structural part from single preform
Dosing equipment for precise injection and mold engineering enable near-net-shape dry preform for HP-RTM CFRP composite part with rapid cycle time.
-
Plant tour: Dowty Propellers, Gloucester, U.K.
Transforming decades of design and RTM production reliability into more sustainable, next-generation composite propellers.
-
Materials & Processes: Fabrication methods
There are numerous methods for fabricating composite components. Selection of a method for a particular part, therefore, will depend on the materials, the part design and end-use or application. Here's a guide to selection.
-
JEC World 2022, Part 3: Emphasizing emerging markets, thermoplastics and carbon fiber
CW editor-in-chief Jeff Sloan identifies companies exhibiting at JEC World 2022 that are advancing both materials and technologies for the growing AAM, hydrogen, automotive and sustainability markets.
-
Plant tour: Bucci Composites, Faenza, Italy
A stalwart in Italy’s “Motor Valley” opens its doors for a discussion and exploration of the company’s history in composites manufacturing for high-performance cars and other applications.
-
Fast and Faster: Rapid-cure resins drive down cycle times
New systems include sub-1-minute cures ideal for higher automotive production volumes.
-
Composites recycling: Gaining traction
Recycling of carbon fiber, glass fiber and — at last — resins, is growing as new players enter the space.
-
Another opportunity to meet, and learn, in Paris
At the JEC World 2017, improvements in materials and processes were present at nearly every stand, with the emphasis on automotive-capable production speeds.
-
JEC World 2016 exhibition and product previews
JEC World 2016 will be held in Paris March 8-10. These are some of the products that will be found at the show.
-
Wet compression molding
Automated process cuts cycle time and cost for CFRP parts with potential for 65% fiber volume via Dynamic Fluid Compression Molding variant.
-
Mubea Carbo Tech: High-quality auto composites go high-volume
Known for its precision and technical acumen in CFRP motorsports structures, MCT draws from its steel auto parts parent to push high-performance and industrial production to new plateaus.
-
Automotive composites: Thermosets for the fast zone
Epoxies continue to be developed for faster cure to meet automotive production rates.
-
The rise of HP-RTM
Decades of development have propelled it to prominence but its future demands industrial solutions for handling cost, complexity and process control.
-
2014 JEC Europe Review
The composites world met again in Paris, vibrant, stronger, and more forward-looking than ever before.
-
JEC Europe 2013 new product showcase
The JEC Europe 2013 trade show (March 12-14, at the Paris Expo, Porte de Versailles, Paris, France) was the venue for introductions of a large number of new composite materials, technologies and manufacturing processes. Here's the CT editorial staff's compilation of what was on display.
-
JEC 2013 at first blush
CT Editor-in-chief Jeff Sloan risks some immediate reactions to his week in Paris at the JEC Europe 2013 composites trade show.
-
Auto composites quest: One-minute cycle time?
Faced with high fuel prices and ever-more stringent restrictions on tailpipe emissions, automakers are taking composites into their own hands.
-
Lightweighting a heavyweight
Process combination produces significantly lighter overhead storage bins for big-rig sleeper cabs.
-
Polyurethane long fiber technology (LFT) replaces wood in spa surround
To many consumers, the thought of a relaxing soak in a hot tub is mighty appealing — but the thought of spa maintenance, particularly replacing rotted wood in the spa's cabinet-like enclosure, probably isn't. For spa manufacturer Clearwater Spas (Woodinville, Wash.), that reality and the fact that building decorativ