DowAksa Ileri Kompozit Malzemeler Ltd. Sti

Miralay Sefik Bey Sk. Ak-han No. 15-17
Gumussuyu - Istanbul , 34437 TR

Connect

As Seen In CompositesWorld

IACMI Project 3.2 tools

Carbon fiber/epoxy for automotive mass reduction, mass production
IACMI precompetitive research explores carbon fiber-reinforced prepreg, SMC with novel matrix for structural passenger-car applications.

wind blade manufacturing

DowAksa joins wind blade consortium PULLWind
DowAksa has joined the group with the aim of helping clients to build and develop their businesses in relation to the use of carbon fiber for wind turbine blade manufacture.​​​​​​​

Musings on my first CAMX
Insights and inspiration from the 2018 Composites and Advanced Materials Expo which was held in Dallas, TX, US last week. 

Fast and Faster: Rapid-cure resins drive down cycle times

Fast and Faster: Rapid-cure resins drive down cycle times
New systems include sub-1-minute cures ideal for higher automotive production volumes.

The rear wall of the Audi R8 Spyder, manufactured by BENTELER-SGL.

Highlights: SPE ACCE 2017
The Society of Plastics Engineers Automotive Composites Conference and Exhibiton (SPE ACCE), held Sept. 6-8 in Novi, MI, US, remains the composites industry’s go-to event for the latest on technology and equipment for automotive composites design, tooling and fabrication.

Building retrofitted with carbon fiber can survive simulated earthquake
Turkish researchers successfully demonstrated that carbon fiber-based material could prevent the collapse of thousands of buildings during a future major quake.

carbon fiber

Supply and demand: Advanced fibers
Demand for advanced fiber, virgin and reclaimed, is on an upswing after a dip during the recent recession. Fiber suppliers are gearing up to meet an expected increase in demand as manufacturers in a number of composites end-markets scale up or start up part development and production programs

Australian carbon fiber center to partner with DowAksa
DowAksa will team with Deakin University and the Carbon Nexus facility to promote carbon for market adoption, and promote Australian expertise in materials and manufacturing.

Supply and demand: Advanced fibers (2015)
Demand for advanced fiber, virgin and reclaimed, is on an upswing after a dip during the recent recession. Fiber suppliers are gearing up to meet an expected increase in demand as manufacturers in a number of composites end-markets scale up or start up part development and production programs.

DowAksa to establish U.S. carbon fiber manufacturing presence
DowAksa, a joint venture of Dow and acrylic specialist AKSA, has established DowAksa USA and plans to build an industrial-grade carbon fiber manufacturing operation in the U.S. sometime in the next three to five years.

2014 JEC Europe Review
The composites world met again in Paris, vibrant, stronger, and more forward-looking than ever before.

The markets: Automotive (2014)
A revitalized auto industry emerged from the Great Recession in 2012 leaner and, in terms of health-related concerns, cleaner, too, but faced a one-two punch in terms of fuel economy and carbon-dioxide (CO2) emission standards that put intense focus on vehicle lightweighting.

Will carbon fiber be ready to join the 54.5-mpg battle?
Guest columnists Lindsay Brooke, senior editor of the Society of Automotive Engineers’ (SAE) Automotive Engineering International magazine, says Carbon fiber’s decades-long promise in automotive composites might, indeed, be realized.

Market Outlook: Surplus in carbon fiber's future?
Participants at CW’s Carbon Fiber 2012 Conference see one coming as early as 2016.

From dream to reality, with a good business plan
CompositesWorld's conference director Scott Stephenson comments on Istanbul, Turkey-based Akrilik Kimya Sanayii's successful quest to enter the small community of the world's carbon fiber producers.

Carbon fiber market: Cautious optimism
As the recession recedes, the demand for carbon fiber, and the supply to meet it, will exceed prerecession expectations.

Conference highlights: Carbon Fiber 2010
For the composites professionals who gathered from every link in the carbon fiber composites supply chain at CompositesWorld’s Carbon Fiber 2010 conference (Dec. 7-9 in San Diego, Calif.) one significant development in the carbon fiber landscape colored much of the discussion at this three-day event.

JEC reports that 27,000 composites industry professionals were on hand for all or part of the three-day event.
Source: JEC

JEC COMPOSITES 2008 show review
Composites professionals converged on this annual Parisian gathering in greater numbers than ever before, confident that the market’s global growth will continue.

JEC reports that 27,000 composites industry professionals were on hand for all or part of the three-day event.
Source: JEC

JEC COMPOSITES Show highlights
The annual gathering in Paris reflects the industry’s confidence that the market’s global growth will continue.

Product Categories of DowAksa Ileri Kompozit Malzemeler Ltd. Sti

Carbon, PAN-based
Precursors, for carbon fiber