AdamWorks

A designer and manufacturer of composite solutions for multiple industries, including aerospace and defense, transportation, wind, infrastructure and more. Combining both engineering services and manufacturing, the company is a complete, one-stop solution for products made from composites.

7367 S Revere Parkway
Bldg. 2
Centennial, CO 80112 US

Connect

As Seen In CompositesWorld

Portable wind turbine powers the warrior
DARPA-financed program puts wind energy to use for battery and system recharging.

People Briefs: Feb. 22, 2011
Thomas Gambon is named division controller of Stahlin Non-Metallic Enclosures; AdamWorks named Dennis Olcott senior vice president of engineering and chief engineer.

AdamWorks picked by Lockheed Martin for special missions craft
AdamWorks will design and manufacture structures and subsystems to support the modification of an EADS CASA C-295 turboprop aircraft for the inclusion of an advanced surveillance system.

Product Categories of AdamWorks

Materials
  • Prepregs, thermoset
    • Cyanate ester
      • Cyanate ester, <12K tow
      • Cyanate ester, >12K tow
      • Cyanate ester, 3-inch tape
      • Cyanate ester, 6-inch tape
      • Cyanate ester, 12-inch tape
      • Cyanate ester, 60-inch tape
      • Cyanate ester, Other tape
      • Cyanate ester, Fabric
      • Cyanate ester, Mat
    • Epoxy
      • Epoxy, <12K tow
      • Epoxy, >12K tow
      • Epoxy, 3-inch tape
      • Epoxy, 6-inch tape
      • Epoxy, 12-inch tape
      • Epoxy, 60-inch tape
    • Epoxy, 250 F cure
      • Epoxy, 250 F cure, <12K tow
      • Epoxy, 250 F cure, >12K tow
      • Epoxy, 250 F cure, 3-inch tape
      • Epoxy, 250 F cure, 6-inch tape
      • Epoxy, 250 F cure, 12-inch tape
      • Epoxy, 250 F cure, 60-inch tape
      • Epoxy, 250 F cure, Other tape
      • Epoxy, 250 F cure, Fabric
      • Epoxy, 250 F cure, Mat
    • Epoxy, 350 F cure
      • Epoxy, 350 F cure, <12K tow
      • Epoxy, 350 F cure, >12K tow
      • Epoxy, 350 F cure, 3-inch tape
      • Epoxy, 350 F cure, 6-inch tape
      • Epoxy, 350 F cure, 12-inch tape
      • Epoxy, 350 F cure, 60-inch tape
      • Epoxy, 350 F cure, Other tape
      • Epoxy, 350 F cure, Fabric
      • Epoxy, 350 F cure, Mat
Tools/tooling materials
  • Other tools/tooling materials
  • Tools
    • Cast
    • Prototype
    • Prototype, plaster
    • Composite
      • Composite, carbon fiber/epoxy
      • Composite, fiberglass
      • Composite, prepreg
      • Composite, other
  • Mandrels
    • Mandrels, aluminum
    • Mandrels, inflatable
    • Mandrels, segmented
    • Mandrels, steel
    • Mandrels, other
Auxiliary processing equipment, repair equipment, and supplies
  • Additive manufacturing/3D printing systems
    • 3-D printing
Testing, gauging, monitoring, analytical equipment and software
  • Coordinate measurement machines
  • Mechanical test fixtures
Fabricating services
  • Other fabricating services
  • Thermoset materials
    • Cutting, finishing, and machining
    • Hand layup
    • Honeycomb structures
    • Prototyping
    • Surface treatment
Composite Structures & Components
  • Aerospace, aircraft interior
  • Aerospace, flight control surfaces
  • Aerospace, fuselage/wing
  • Aerospace, radomes
  • Armor, composite
  • Automotive, body panels &amp; substructures
  • Automotive, interior (seats, IPCs, floor panels, etc.)
  • Automotive, underhood
  • Carbon/carbon composites
  • Infrastructure, composite
  • Laminate panels, with core
  • Laminate sheets, solid
  • Marine, boat (hulls, decks, bulkheads, etc.)
  • Marine, other
  • Pressure vessels
  • Rods
  • Tubes
  • Other composite structures
Design, testing, consulting, other services
  • CAD/CAM/CAE design
  • Finite element modeling/analysis (FEM/FEA)
  • Materials analysis
  • Regulatory compliance
  • Repair services, composites
  • Structural strengthening / reinforcement services
  • Consulting
    • Consulting, materials
    • Consulting, process development
    • Consulting, structual design