AdamWorks
7367 S Revere Parkway
Bldg. 1A
Centennial
,
CO
80112
US
Connect
- Visit Company Website
- 303-200-6604
- Contact
As Seen In CompositesWorld

Portable wind turbine powers the warrior
DARPA-financed program puts wind energy to use for battery and system recharging.
- Prepregs, thermoset
- Cyanate ester
- Cyanate ester, <12K tow
- Cyanate ester, >12K tow
- Cyanate ester, 3-inch tape
- Cyanate ester, 6-inch tape
- Cyanate ester, 12-inch tape
- Cyanate ester, 60-inch tape
- Cyanate ester, Other tape
- Cyanate ester, Fabric
- Cyanate ester, Mat
- Epoxy
- Epoxy, <12K tow
- Epoxy, >12K tow
- Epoxy, 3-inch tape
- Epoxy, 6-inch tape
- Epoxy, 12-inch tape
- Epoxy, 60-inch tape
- Epoxy, 250 F cure
- Epoxy, 250 F cure, <12K tow
- Epoxy, 250 F cure, >12K tow
- Epoxy, 250 F cure, 3-inch tape
- Epoxy, 250 F cure, 6-inch tape
- Epoxy, 250 F cure, 12-inch tape
- Epoxy, 250 F cure, 60-inch tape
- Epoxy, 250 F cure, Other tape
- Epoxy, 250 F cure, Fabric
- Epoxy, 250 F cure, Mat
- Epoxy, 350 F cure
- Epoxy, 350 F cure, <12K tow
- Epoxy, 350 F cure, >12K tow
- Epoxy, 350 F cure, 3-inch tape
- Epoxy, 350 F cure, 6-inch tape
- Epoxy, 350 F cure, 12-inch tape
- Epoxy, 350 F cure, 60-inch tape
- Epoxy, 350 F cure, Other tape
- Epoxy, 350 F cure, Fabric
- Epoxy, 350 F cure, Mat
- Cyanate ester
- Other tools/tooling materials
- Tools
- Cast
- Prototype
- Prototype, plaster
- Composite
- Composite, carbon fiber/epoxy
- Composite, fiberglass
- Composite, prepreg
- Composite, other
- Mandrels
- Mandrels, aluminum
- Mandrels, inflatable
- Mandrels, segmented
- Mandrels, steel
- Mandrels, other
- Additive manufacturing/3D printing systems
- 3-D printing
- Coordinate measurement machines
- Mechanical test fixtures
- Other fabricating services
- Thermoset materials
- Cutting, finishing, and machining
- Hand layup
- Honeycomb structures
- Prototyping
- Surface treatment
- Aerospace, aircraft interior
- Aerospace, flight control surfaces
- Aerospace, fuselage/wing
- Aerospace, radomes
- Armor, composite
- Automotive, body panels & substructures
- Automotive, interior (seats, IPCs, floor panels, etc.)
- Automotive, underhood
- Carbon/carbon composites
- Infrastructure, composite
- Laminate panels, with core
- Laminate sheets, solid
- Marine, boat (hulls, decks, bulkheads, etc.)
- Marine, other
- Pressure vessels
- Rods
- Tubes
- Other composite structures
- CAD/CAM/CAE design
- Finite element modeling/analysis (FEM/FEA)
- Materials analysis
- Regulatory compliance
- Repair services, composites
- Structural strengthening / reinforcement services
- Consulting
- Consulting, materials
- Consulting, process development
- Consulting, structual design