Wisconsin Oven Corp.

2675 Main St.
PO Box 873
East Troy, WI 53120 US

Connect


Wisconsin Oven Ships Curing Conveyor Oven for a Leading Supplier of Flooring Products

Published Date: 
Tuesday, June 28, 2016

Wisconsin Oven Corporation announced the shipment of one (1) natural direct gas fired three (3) zone conveyor oven with cool down to a leading supplier of flooring products. The conveyor oven will be used for curing adhesive on parts at a rate of 350 parts per hour.

The curing conveyor oven was designed with three (3) heating zones and one (1) cooling zone. This design provides an optimal cure of adhesive on the parts. Each zone includes a personnel access door on the side of the oven for ease of access during maintenance and service. The curing oven has a maximum temperature rating of 600°F and total work chamber dimensions of 5’0” W x 45’0” L x 1’0” H. 

Guaranteed temperature uniformity of ±10 at 400° F was verified through a temperature profile test using measurements from 30” in from each opening, in a stabilized oven. An infrared pyrometer monitors the part temperature at the exit of both the final heating and the cooling zone. If the product temperatures exceed its setting, an alarm will sound as a result. The conveyor oven is rated for Class A use as defined by NFPA 86 with a solvent rating of 0.14 gallons per hour.

 “We strive to design our equipment to provide the best quality part results for our customers. In this case three heating zones followed by a cool down zone resulted in the highest quality cure for their product while the conveyor system maximized their production rate.” – Gene Vetter, Application Engineer

Unique features of this belt conveyor oven includes:

  • Top down airflow
  • Three (3) 15’ long direct gas heating zones
  • One (1) 15’ long ambient air cooling zone
  • Temperature uniformity of ±10 at 400° F
  • Conveyor speed range of 10 to 60 feet per minute
  • Infrared pyrometer to monitor part temperature upon exit of both the final heating and cooling zones

This conveyor oven was fully factory tested and adjusted prior to shipment to from our facility. All safety interlocks are checked for proper operation and the equipment is operated at the normal and maximum operating temperatures. A 150-point quality assurance check list was completed to ensure the equipment met all Wisconsin Oven quality standards.

#09247A

A Message from Wisconsin Oven Corp.

Wisconsin Oven Ships Two Curing Ovens to a Manufacturer of Water Filtration Products

Published Date:  Tuesday, December 27, 2016 Wisconsin Oven Corporation shipped two (2) electrically heated combination airflow ovens to a manufacturer of water filtration products.

Wisconsin Oven Ships Custom Conveyor Oven For Drying Paper Pulp Material

Published Date:  Tuesday, September 27, 2016 Wisconsin Oven Corporation announced the shipment of a natural gas fired three (3) zone conveyor oven to a packaging manufacturer for drying paper pulp material.

Wisconsin Oven Ships Composite Curing Oven For The Aerospace Industry

Published Date:  Tuesday, August 16, 2016 Wisconsin Oven Corporation announced the shipment of a composite curing oven for a leader in the aerospace industry.

As Seen In CompositesWorld

Wisconsin Oven composites curing oven

CAMX 2018 preview: Wisconsin Oven
Wisconsin Oven Corp. (East Troy, WI, US) is featuring its electrically heated, gas-fired and indirect gas-fired composite curing batch ovens designed to meet customers’ process requirements.

A&P Technology

Where the art and science of braiding meet
A&P has made a name for itself as a braider, but the depth and breadth of its technical aptitude comes into sharp focus with a peek behind usually closed doors.

CompositesWorld logo

Wisconsin Oven doubles manufacturing space
The company has added 130,000 ft2 of new space with the acquisition of a neighboring building in East Troy, WI, US.

CAMX 2016 preview: Wisconsin Oven
Wisconsin Oven Corp. (East Troy, WI, US) will emphasize its line of electrically heated, gas-fired and indirect gas-fired composite curing batch ovens.

Curing oven
Wisconsin Oven Corp. (East Troy, WI, US) has introduced the Express Batch Oven (EBO), for curing resins and adhesives, available in 26 sizes in either electric or gas models.

VBO prepregs: The Vision SF50
OOA vacuum-bag-only process makes carbon fiber structures a reality for the world’s first personal jet.

Thermal Product Solutions acquires Baker Furnace
Thermal Product Solutions, which already owns Wisconsin Oven, adds a West Coast presence with the Baker Furnace acquisition.

CAMX 2015 preview: Wisconsin Oven
Wisconsin Oven Corp. (East Troy, WI, US) will feature its line of electrically heated, gas-fired and indirect gas-fired composite curing batch ovens.

Wisconsin Oven Corp. delivers composite curing batch oven to University of South Carolina
With a maximum operating temperature of 800°F, the oven will allow students to process and develop new higher temperature materials as they hit the market.

Dave Strand named president, CEO of Thermal Product Solutions
Strand comes to Thermal Product Solutions (TPS) from Wisconsin Oven, which was recently acquired by TPS.

CAMX offers unprecedented new product access
CAMX 2014, Oct. 13-16 in Orlando, Fla., promises to be North America's largest ever composites trade show and conference. As a result, exhibitors are coming to the event with a wide array of new and existing materials, machinery, software and technology designed to help make composites fabrication faster, easier and more adaptable. CompositesWorld has been gathering information from CAMX exhibitors about what they will be featuring and introducing in their booths. This week's CAMX newsletter offers a preview of some of what you will find on the show floor.

CAMX 2014 preview: Wisconsin Oven
Wisconsin Oven Corp. (East Troy, Wis., USA) is emphasizing its line of electrically heated, gas-fired and indirect gas-fired composite curing batch ovens.

Wisconsin Oven officially opens expanded facility
The heating and oven specialist has added 30,000 sq ft to its plant following record growth in 2013.

Albany Engineered Composites: Weaving the Future in 3-D
This 3-D weaver turned composite component supplier pursues a future in 3-D structures through continuous technology development.

Wisconsin Oven breaks ground for expansion
After several years of steady growth, Wisconsin Oven Corp. has begun work on a 30,000-sq-ft/2,787-sq-m addition to its East Troy plant.

Wisconsin Oven celebrates 40 years, announces expansion
Wisconsin Oven, founded in November 1973, is celebrating 40 years in business and is expanding its East Troy, Wis., USA, plant by 29,000 sq ft.

Wisconsin Oven sites record growth in Waukesha expansion
Citing welcome growth, the East Troy, Wis.-based oven manufacturer says it will open its fifth plant there, in an existing 30,000-ft2 (about 2,790m2) facility, before the end of this month.

ACMA COMPOSITES 2013 preview
For 2013, the American Composites Manufacturers Assn. (ACMA, Arlington, Va.) returns its annual U.S. COMPOSITES exhibition and convention to the East Coast’s sunny, fun capital, Orlando, Fla.

PLC Holding acquires Wisconsin Oven Corp.
French firm PLC Holding has acquired Wisconsin Oven Corp., a manufacturer of curing systems for composites operations.

COMPOSITES 2012 Highlights
As ACMA’s annual conclave convened in North America’s gambling capital, show exhibitors and attendees placed their bets on better days.

Product Categories of Wisconsin Oven Corp.

Bonding equipment
Curing ovens/lamp arrays
Drying equipment
Furnaces
Heaters
Metal-treating and metal bonding equipment
Other auxiliary equipment
Ovens
Repair ovens