Airtech International Inc.

5700 Skylab Road
Huntington Beach, CA 92647 US

Division
Airtech Advanced Materials Group

Connect

Airweave® UHT 800 Breather

Airweave® UHT 800 (Ultra High Temperature) is a non-woven, fiberglass breather. It’s designed for use with high temperature thermoset and thermoplastic resin systems. Airweave® UHT 800 is superior to woven fiberglass breather with one layer providing good breathing to 800°F (427°C) and much easier to conform to part shapes. Airweave® UHT 800 is part of a full range of Airtech products available for Ultra High Vacuum Bagging applications.

Benefits:
• Ultra high temperature resistance for continuous breather performance of high quality thermoplastic molding.
• Non-woven construction has superior elongation for better pressure application than woven fiberglass.
• Maintains vacuum levels at very high temperature for better quality parts.

A Message from Airtech International Inc.

Thermalimide RCBS

Thermalimide RCBS is a high performance release film treated on both sides for cure temperatures up to 761°F (405°C). Thermalimide RCBS is an ideal release film used during the forming process of thermoplastic materials and other high temperature applications.

A4000 LFST Heat Shrinkable Release Film Tube

A4000 LFST is a heat shrinkable lay-flat tube which has been oriented in the transverse direction.

Combo-Tech Combination Products

Combo-Tech is our expanded product line that bonds various vacuum bagging materials together to form a better overall product and reduce “touch labor”, saving companies hours of labor expense while increasing productivity.

Wide Films

Airtech bagging films are manufactured up to 16 meters (52.5 ft) wide; the largest in our industry.

AirFlow 65R

Airflow 65R can be used as an autoclave or oven hose.

Toolfusion® 3 Infusion Resin for Composite Tooling

Toolfusion® 3 is a two part low viscosity epoxy infusion resin formulated to produce pre-preg quality, composite molds.

Beta Prepreg Composite Tooling

The Beta Prepreg composite tooling prepreg has been selected as the JEC 2011 Innovation Award finalist.

MasterFlex "S" Series

The Masterflex “S“ series is a flexible spiral square tube used as a reinforcing hat section stiffener on the backside of the tool face.

As Seen In CompositesWorld

Airtech launches new carbon fiber prepregs
The company’s LTC3 prepregs are said to offer a low temperature cure and high temperature use after post cure, and allow the use of lower cost master model materials.

release film

Airtech launches high temperature vacuum bagging materials for thermoplastic molding
The company has released a new high performance release film, a new sealant tape for high temperature applications and non-woven blended, fiberglass breathers.

carbon fiber hot rod

Carbon fiber hot rod sets new record
After breaking the land speed world record in September, Team Vesco’s Turbinator II has gone on to exceed 500 mph.

Airtech's Termalimide RCBS.

CAMX 2018 preview: Airtech
Airtech International Inc. (Huntington Beach, CA, US) is introducing several new products this year in Booth V3. 

pre-cut tapes

Airtech introduces new tapes
Airtech has launched additional tapes in Pre-Cut format.

Carving a niche via the new, the different and the difficult
Van Horn Aviation seized a real opportunity in helicopter blades, with little composites acumen but big desire. The rest is history worth reading.

FBM Composite Materials

Merger of entrepreneurial metal-centric firms claims composites’ first
Tier 2 composites manufacturer FBM Composite Materials developed the right pill for a Boeing headache and became the sole supplier of 787-9 Dreamliner door surrounds.

Advances in Wind Energy Workshop

Advances in Wind Energy workshop registration opens
Two-day workshop from Composites One and the Closed Mold Alliance and IACMI explores advanced materials, manufacturing processes and repair techniques for wind energy applications.

Vitralit UV 4802

New Products: April 2018
CW’s monthly roundup of new products for the composites industry.

cut piece tapes

New cut piece tapes from Airtech
Pre-cut tapes minimize use of knives and scissors, reducing waste and labor.

Spintech Smart Cauls

Smarter molding with Smart Cauls
Spintech’s Smart Caul technology can be used to create internal mandrels, bladders for hollow parts or any irregular male layup tool shape involving a sharp angle or corner.

Airtech TMGC-TX triaxial carbon fiber fabrics

Airtech triaxial fabrics target composite molds
Airtech Advanced Materials Group (Huntington Beach, CA, US) has introduced TMGC-TX, triaxial carbon fiber fabrics developed for the manufacture of composite molds made with Airtech Toolfusion resins.

Airtech receives LM Wind Power supplier award

Airtech receives supplier award
Airtech Advanced Materials Group was awarded “Best Growth Partner 2017” by LM Wind Power at the LM Wind Power Supplier Conference in Amsterdam, Netherlands.

Airtech 45th anniversary logo

Airtech celebrates 45th anniversary in 2018
The vacuum bagging materials specialist, begun in 1973, is celebrating 45 years of serving the composites manufacturing industry.

Airtech Asia's new Tianjin facility.

Airtech Asia expands China presence
The new facility in Tianjin, China, is 300,000 ft2/27,800m2 and should meet the company’s needs in the region for the next two decades.

Airtech Combo-Tech material.

Airtech's Combo-Tech combines vacuum bagging materials
Airtech Advanced Materials Group (Huntington Beach, CA, US) has introduced Combo-Tech, an expanded product line that bonds various vacuum bagging materials together to form what is said to be a better overall product that reduces touch labor.

Airtech Airpath MD braided breather cord.

Airtech offers braided breather cord
Airtech International Inc. (Huntington Beach, CA, US) has developed Airpath MD, a tough, lightweight braided breather cord.

New discontinuous fiber prepreg from Airtech
Airtech International Inc. has introduced a new prepreg, Beta TX670 DISCO Prepreg, made with discontinuous carbon fiber and benzoxazine resin. 

Ceramic matrix composites: Hot engine solution
Disruptive designs for composites operation in 1093°C zones.

Infusion supplies
Airtech Advanced Materials Group (Huntington Beach, CA, US) has introduced Vac Valve BBV, a two-piece vacuum valve that perforates the bagging film when the top piece is inserted and threaded into the base plate.

Product Categories of Airtech International Inc.

Backup structures
Bleeder cloths
Breather cloths
Caul plates
Composite, other
Composite, prepreg
Expendable materials
Filler paste
Film and sheet
Gasket materials for vacuum bags
Hand layup tools (cutters, rollers, scissors, etc.)
Heat tapes
Hoses, vacuum
Leak detectors
Mandrels, inflatable
Master pattern material, other
Master pattern material, polymeric
Monolithic graphite
Other tools/tooling materials
Peel plies
Peel plies, nylon
Peel plies, polyester
Quick disconnects for vacuum hoses
Release agents, liquid
Release agents, sprays
Release films, for vacuum bagging
Repair kits and equipment
Sealing tapes and materials
Shrink tapes
Tooling prepreg
Vacuum bagging materials, for >600 F
Vacuum bagging materials, nylon
Vacuum bagging materials, other
Vacuum bagging materials, polymide
Vacuum bagging materials, reusable
Vacuum bagging materials, silicone
Vacuum valves and pumps