• PT Youtube
  • CW Facebook
  • CW Linkedin
  • CW Twitter
8/23/2016

Sprayup, gelcoat machinery accessories

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Fibermaq (São Paulo, Brazil), a manufacturer of equipment for composites molding, has developed three accessories for sprayup and gelcoat machines, including those made by other manufacturers.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Related Suppliers

Fibermaq Equipamentos Ltda (São Paulo, Brazil), a manufacturer of equipment for composites molding, has developed three accessories for sprayup and gelcoat machines, including those made by other manufacturers. The first is a filter installed between the outlet of the peroxide (MEKP) packaging and the pump that pushes the material up to the gun. Any impurities in the MEKP may cause problems in the sealing and, as a result, a peroxide failure, says Fibermaq. The second product is a flowmeter, which allows the molder check whether or not the peroxide is mixed with resin and gelcoat. Third, Fibermaq changed the filtering system of the tube connected to the resin and gelcoat packaging, switching to a threaded fitting rather than screw, and smaller mesh than the previously used.

RELATED CONTENT

  • Processing within the PUR cure window

    Composite Spray Molding enables volume production of fiber-reinforced polyurethane sandwich structures for auto interiors. Are Class A exterior parts next?

  • Fabrication methods

    There are numerous methods for fabricating composite components. Selection of a method for a particular part, therefore, will depend on the materials, the part design and end-use or application. Here's a guide to selection.

  • SOURCEBOOK 2015: The online edition

    Welcome to the online SOURCEBOOK, the searchable, updatable, Internet-based counterpart to CompositesWorld's annually published print SOURCEBOOK.

Related Topics

Resources