• PT Youtube
  • CW Facebook
  • CW Linkedin
  • CW Twitter
5/28/2015 | 2 MINUTE READ

Sumitomo Bakelite: The future of composites is in cylinder housings

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The company has a goal to eventually introduce an all-composite engine.


Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Sumitomo Bakelite Co. (Tokyo, Japan) has a prediction for the year 2020. That will be the year when the first cylinder housings manufactured from polymer composite materials will be introduced into passenger car and motorcycle engines, replacing the aluminum components currently in use, says SBHPP High Performance Plastics, the business unit of Sumitomo Bakelite.

The company says its research show that glass fiber reinforced phenolic cylinder housings manufactured using the injection molding process deliver the same performance as die cast aluminum components, however, it also offers a significant reduction in weight, lower engine noise and reduced heat radiation. Weight reduction is a primary objective for automotive manufacturers under increasing pressure to improve fuel economy and reduce emissions. In addition, lifecycle assessments demonstrate that the environmental impact of phenolic composite components over their entire lifetime is lower than that of aluminum alternatives.

"In three to five years, composite cylinder housings will be a reality," said Hendrik De Keyser, marketing and technology officer at SBHPP. "We believe this composites technology will first be adopted in small engines of up to 1.6 liters. Implementation in higher performance and higher displacement engines will follow.”

Recent work by SBHPP has involved a cooperation with the Fraunhofer Project Group in Karlsruhe, Germany, during which SBHPP manufactured a proof of concept composite cylinder casing for a single-cylinder 650 cc engine. A 55% glass fiber reinforced phenolic was used in combination with integrated metal inserts and a metal cylinder liner. The injection molding process resulted in a cycle time of 90 seconds.

Compared with the aluminum part the composite casing delivers a weight reduction of up to 20%, and manufacturing costs are approximately 10% lower for a production run of up to 30,000 parts/year, the company said.

Improved noise, vibration and harshness (NVH) behavior was found to be another benefit of composites. Acoustic tests confirmed a significant noise reduction for the composite cylinder casing compared with the aluminum reference part. In addition, thermal tests verified reduced heat radiation from the composite part to the surrounding environment. Thermosensors mounted on the exhaust, drive and inlet side of the composite part all settled at a significantly lower temperature than the sensors on the aluminum component.

SBHPP is now planning to work with engine suppliers and automotive OEMs to take this concept to market. It also plans to build on the success of this research by developing a more complex multi-cylinder composite-based engine, with the ultimate goal of introducing an all-composite engine. This is envisioned in the virtual engine concept, a small, scalable engine architecture with two, three or four cylinders which uses SBHPP compounds and composite materials. This engine is designed for use as primary engine for passenger cars or motorcycles or as a range extender for electric vehicles.


  • Fabrication methods

    There are numerous methods for fabricating composite components. Selection of a method for a particular part, therefore, will depend on the materials, the part design and end-use or application. Here's a guide to selection.

  • HP-RTM on the rise

    Decades of development have propelled it to prominence but its future demands industrial solutions for handling cost, complexity and process control.

  • Composite leaf springs: Saving weight in production

    Fast-reacting resins and speedier processes are making economical volume manufacturing possible.