Ready-to-Ship Composites
Published

AIMPLAS enters financial year with €13.3 million revenue and sustainability commitment

AIMPLAS closed 2019 with a 14% increase in revenue based on 226 R&D&I projects, became leading plastics technology center in Valencia, constructed new facility that promote research for circular economy.

Share

AIMPLAS facility.

Photo Credit: AIMPLAS

Back in October 2020, AIMPLAS (Valencia, Spain) Plastics Technology Centre, closed the 2019 financial year with revenue of €13.3 million ($15.66 million), which represents a 14% increase compared to the previous year. Its commitment to social and environmental sustainability was also highlighted by a report verified by the Global Reporting Initiative (GRI), an independent organization that is a pioneer in report presentation and an international benchmark in sustainability reports. AIMPLAS also notes the construction that also began in 2019 on a new 1,500-square-meter building which plays a role in environmental sustainability.

Of the €13.3 million in revenue in 2019, 73% came from a total of 226 R&D&I projects carried out, 62 of which were international in scope. In total, 493 companies (298 SMEs) participated in these projects and earned a return of €30.8 million ($36.3 million) in direct aid to finance their R&D&I activities. By sector, 34% were companies in packaging, 19% in recycling, 15% in the automotive and transport industries, 10% in construction, 8% in the health sector, 5% in the electrical-electronic sector, 4% in agriculture and 2% in aeronautics.

According to the CDTI report on Spanish participation in the Horizon 2020 program (2014-2019) — which analyzes the return on investment (ROI) of these European projects by autonomous community — AIMPLAS is the leading plastics technology center in the region of Valencia and in Spain as a whole. At a regional level, AIMPLAS has moved up to fifth place in the ranking and even surpassed some of the leading universities in this region. Meanwhile, at national level, it is ranked eleventh in the number of projects and economic return, sixth in coordinated projects and among the top four in the project-to-employee ratio. AIMPLAS says it also leads the way in the percentage of coordinated projects, given that 45% of the proposals carried out were coordinated. This highlights the technical excellence of AIMPLAS proposals with respect to the needs raised by the European Commission. During the H2020 program, AIMPLAS developed a total of 31 projects, 14 of which were coordinated.

The center’s other revenue in 2019 came from 6,094 services and assessments carried out (which accounted for 20% of this revenue) and training activities: 183 courses and workshops amounting to 3,195 hours attended by nearly 2,800 professionals from 1,226 businesses (which accounted for 5% of this revenue).

CSR and social impact

All 2019 economic, environmental and social data were collected to prepare the third sustainability report, which was verified by GRI. In 2016, AIMPLAS took the decision to join the United Nations Global Compact. Since then, it has reported on its CSR actions in line with the Compact’s ten principles on human rights, labor, the environment and anti-corruption. In 2019, the center went a step further and reportedly became the first Spanish technology center to produce reports in accordance with GRI standards.

The 2019 AIMPLAS sustainability report includes, for the first time, the results of the calculation by a specialist external consultant of the center’s social return on investment (SROI). The results of this study on the social (not financial) impact of all the center’s activities indicate that, for every euro invested in AIMPLAS activities in 2019, it achieved a return on investment of €7.22 ($8.48). The report also estimates that AIMPLAS contributed €70 million ($82.4 million) to the SDGs and its impact on the circular economy amounted to €59 million ($69.4 million).

Environmental sustainability

Throughout 2019, the circular economy was a guiding force in the activity of the technology center, AIMPLAS says, which submitted more than 80 R&D&I projects and participated in a total of 28 events on the topic. The center also taught 25 courses and organized four workshops that were attended by more than 500 people. In terms of technological services, a new diagnostics service was launched to enable companies to implement this type of strategy. Furthermore, the number of ENAC-accredited tests for recycled plastics increased and a researcher was taken on as a EuCertPlast-accredited expert auditor to carry out the audits that recycling companies must pass to obtain this certification.

Environmental sustainability has even played a key role in the center’s investments in new facilities, as exemplified by the construction of a new 1,500-square-meter laboratory, which brings the center’s total built area to 10,500 square meters (6,000 square meters of pilot plants and 4,500 square meters of laboratories). The facility will double its polymer synthesis capacity with a pilot plant maintaining a capacity of 50 liters (pre-industrial level) that includes a cleanroom to further promote research in fields such as health, plastronics and aerospace. The new laboratory received environmental certification in accordance with the BREEAM methodology, which endorses the building’s sustainability. AIMPLAS says it was the first Spanish laboratory to achieve this certification.

In terms of labor, another milestone in 2019, AIMPLAS says, was its achievement of the Great Place to Work certification for the first time, which considers the company an optimal organization for peoples’ professional development. Furthermore, the center entered the rankings of the best places to work for seniors and millennials.

The technology center celebrated its 30th anniversary in 2020 and received support from the Valencian Regional Ministry of Sustainable Economy, specifically from the Valencian Institute of Business Competitiveness (IVACE), whose collaboration not only helped fund several projects, but was also key for making progress and consolidating the innovation model implemented by both organizations. 

world leader in braiding technology
Nanosilica Filled Adhesives
3D industrial laser projection
BARRDAY PREPREG
Composites One
Harper International Carbon Fiber
Custom Quantity Composite Repair Materials
Toray public database prepreg materials
Renegade Material Composites
pro-set epoxy laminate infusion tool high temp Tg
HEATCON Composite Systems
Harper International Carbon Fiber

Related Content

Plant tour: Joby Aviation, Marina, Calif., U.S.

As the advanced air mobility market begins to take shape, market leader Joby Aviation works to industrialize composites manufacturing for its first-generation, composites-intensive, all-electric air taxi.

Read More
Electronics

PEEK vs. PEKK vs. PAEK and continuous compression molding

Suppliers of thermoplastics and carbon fiber chime in regarding PEEK vs. PEKK, and now PAEK, as well as in-situ consolidation — the supply chain for thermoplastic tape composites continues to evolve.

Read More
Biomaterials

Materials & Processes: Fibers for composites

The structural properties of composite materials are derived primarily from the fiber reinforcement. Fiber types, their manufacture, their uses and the end-market applications in which they find most use are described.

Read More
Feature

Thermoplastic composites welding advances for more sustainable airframes

Multiple demonstrators help various welding technologies approach TRL 6 in the quest for lighter weight, lower cost.

Read More

Read Next

Sustainability

AIMPLAS develops pultruded bio-based profiles for rural and urban development

European BASAJAUN project to optimize sustainable urban development and improve the rural economy via novel bio-based materials, products and building systems.

Read More
Trends

CW’s 2024 Top Shops survey offers new approach to benchmarking

Respondents that complete the survey by April 30, 2024, have the chance to be recognized as an honoree.

Read More
Thermoplastics

From the CW Archives: The tale of the thermoplastic cryotank

In 2006, guest columnist Bob Hartunian related the story of his efforts two decades prior, while at McDonnell Douglas, to develop a thermoplastic composite crytank for hydrogen storage. He learned a lot of lessons.

Read More
Composites One