Episode 24: Scott Lewit, Structural Composites
Scott Lewit, president of Structural Composites, discusses the company’s innovations in marine and ground transportation composites including the development of CoCure Hybrid Metal/Composite technology for Wabash trailers.
The Wabash National Cold Chain Series refrigerated truck body featuring CoCure Hybrid Metal/Composite technology.
Source | Structural Composites
The US Navy's 7m Advanced Combatant Craft (7ACC) which Structural Composites helped develop using its PRISMA composite preforming technology.
Source | Structural Composites
Source | Structural Composites
Source | Structural Composites
Structural Composites' Scott Lewit on the company’s innovations in marine and ground transportation composites. (Music: www.bensound.com)
In this episode of CWTalks, CW editor-in-chief Jeff Sloan interviews Scott Lewit, president of Structural Composites (Melbourne, Fla., U.S.).
Lewit is the creative force behind a number of innovations in marine and ground transportation composites. In this podcast he discusses work with the U.S. Navy and with tractor-trailer manufacturer Wabash National (Lafayette, Ind., U.S.), as well as Structural Composites’ stair-step innovation model, and more.
You can listen to the full CW Talks interview above or visit:
Related Content
-
Infinite Composites: Type V tanks for space, hydrogen, automotive and more
After a decade of proving its linerless, weight-saving composite tanks with NASA and more than 30 aerospace companies, this CryoSphere pioneer is scaling for growth in commercial space and sustainable transportation on Earth.
-
Recycling end-of-life composite parts: New methods, markets
From infrastructure solutions to consumer products, Polish recycler Anmet and Netherlands-based researchers are developing new methods for repurposing wind turbine blades and other composite parts.
-
Daher CARAC TP project advances thermoplastic composites certification approach
New tests, analysis enable databases, models, design guidelines and methodologies, combining materials science with production processes to predict and optimize part performance at temperatures above Tg (≈150-180°C) for wing and engine structures.
