CompositesWorld
Published

On the road with CompositesWorld

CW Senior Editor Scott Francis offers a recap of recent composites industries events including CAMX 2019 and SPE ACCE 2019. 

Share

composites industry

Attendees enjoy a demonstration at CAMX 2019.  CW photo | Heather Francis

September and October have been a couple of travel-filled months for the CW team. The largest composites industry event, CAMX, was held in late September and we also attended the SPE ACCE automotive composites conference as well as some facility tours and site visits (which will be featured soon in upcoming issues of CompositesWorld magazine). In the meantime, here are a few trade show highlights including CW Senior Editor Scott Francis’ video recap from CAMX.

 

In early September CW attended The Society of Plastics Engineers’ (SPE, Bethel, Conn., U.S.) annual Automotive Composites Conference & Exhibition (ACCE) in Novi, Michigan, Sept. 4-6. The theme of the conference was “Composites — Forming the Future of Transportation Worldwide,” and offered a broad technology overview of evolving automotive composites industry. Much of the programming reflected a growing interest from transportation OEMs in the role composites technologies can play in next-generation mobility. If you missed the conference, here are a couple of reports that give an overview:

 

A couple of weeks later CAMX 2019, the largest composites and advanced materials expo in North America, took place Sept. 23-26 in Anaheim, Calififornia. The show gathered around 8,000 attendees and featured more than 520 exhibitors and was packed with technical presentations and networking opportunities.

The potential for thermoplastics to enable high-volume production continues to be a big topic of discussion at the show. One example (and CAMX award finalist), is a  demonstrator access panel for the Bell V-280 Valor tilt-rotor aircraft developed by the TPAC (Enschede, Netherlands) using its TPC-Cycle process, a project aimed at the re-use of production scrap from thermoplastic composites processing for aerospace and high-volume applications.

Learn more about TPAC’s demonstrator access panel in the article “The state of recycled carbon fiber” and about the TPC-Cycle process in the article  “Recycled thermoplastic composites for production.”

 
thermoplastic composites

Demonstrator access panel for rotorcraft developed using TPAC’s TPC-Cycle process.  CW photo | Scott Francis

Mallinda (Denver, Colo., U.S.), a new exbitor at CAMX, showcased a new class of polymeric materials it calls Vitrimer Matrix Composites that provide the mechanical performance of traditional thermosets along with processability and recyclability similar to that of thermoplastics.

This year’s show featured an additive manufacturing workshop for composites that delved into the scope of fiber-reinforced additive manufacturing, from the use of chopped carbon fiber in large-format systems used to build molds and tools, to the use of continuous fiber reinforcement to build discrete high-performance parts and structures. Featured presentations included speakers from Ingersoll Machine Tools (Rockford, Ill., U.S.), Fortify (Boston, Mass., U.S.), CEAD Group (Delft, Zuid-Holland), Orbital Composites (San Jose, Calif., U.S.), Arevo (Milpitas, Calif., U.S.) and Markforged (Watertown, Mass., U.S.).

 

3D printing

Orbital Composites’ composite additive manufacturing platform  CW photo | Scott Francis

Orbital Composites, a new exhibitor at CAMX this year, unveiled a new product it calls Orb-S to address the needs of Industry 4.0 factories. Orbital’s manufacturing platform is designed to aid manufacturers in their transition into the Industry 4.0 and additive manufacturing revolutions. (Learn more here.)

Airtech (Huntington Beach, Calif., U.S.) announced at the show its acquisition of a Thermwood (Dale, Ind., U.S.) LSAM machine and had a large 3D printed mold on display. The LSAM relies on thermoplastic extrusion, a core competancy of Airtech, and the company says it can take tooling from conception to the shop floor significantly faster than using conventional methods. (Learn more here.)

 

vacuum forming, infusion

Smartech showcases Steinbach’s reusable vacuum bagging materials aimed at making vacuum forming and infusion processes easier and more cost-efficient. Products include vacuum sheets, double-sided vacuum bags and its Press | Lock Seal, which eliminates the need for tacking tape.  CW photo | Scott Francis

Efficiencies for increasing productivity were also on display. Examples include Smartech’s (Charlotte, N.C., U.S.) Press | Lock Seal for making vacuum  forming and infusion processes easier and Owens Corning’s (Toledo, Ohio, U.S.) Megadoff multi-end roving designed to increase the continuous flow of robotic and automated manufacturing lines.

 

glass fiber

Owens Corning’s MEGADOFF increases the amount of glass from 40 pounds in a typical doff to 1,939 pounds. Increased doff weight eliminates doff-to-doff splices and improves the continuous flow of robotic and automated manufacturing lines. Zero doff transition also improves part quality and increases manufacturing throughput.  CW photo | Scott Francis

For more of the happenings at CAMX, you can also check out copies of the ShowDaily:

Tuesday, Sept. 24

Wednesday, Sept. 25

Thursday, Sept 26

And those are just a few quick highlights; stay tuned to CW for more insights from CAMX, site tours and much more.

U.S. Polychemical Acrastrip
Kent Pultrusion
TOPCON24
Toray Advanced Composites
Master Bond
Wabash
custom hydraulic press
Sysenqo high performance materials
Carbon Fiber 2024
CAMX 2024
A manufacturing puzzle
CompositesWorld

Related Content

Sustainability

Advanced materials for aircraft interiors

Applications aren't as demanding as airframe composites, but requirements are still exacting — passenger safety is key.

Read More
Biomaterials

Materials & Processes: Composites fibers and resins

Compared to legacy materials like steel, aluminum, iron and titanium, composites are still coming of age, and only just now are being better understood by design and manufacturing engineers. However, composites’ physical properties — combined with unbeatable light weight — make them undeniably attractive. 

Read More
Adhesives

Composite resins price change report

CW’s running summary of resin price change announcements from major material suppliers that serve the composites manufacturing industry.

Read More
Sustainability

Getting To The Core Of Composite Laminates

A wealth of low-cost core solutions are available for high-performance sandwich structures.

Read More

Read Next

Trends

CW’s 2024 Top Shops survey offers new approach to benchmarking

Respondents that complete the survey by April 30, 2024, have the chance to be recognized as an honoree.

Read More
Wind/Energy

Composites end markets: Energy (2024)

Composites are used widely in oil/gas, wind and other renewable energy applications. Despite market challenges, growth potential and innovation for composites continue.

Read More
Filament Winding

From the CW Archives: The tale of the thermoplastic cryotank

In 2006, guest columnist Bob Hartunian related the story of his efforts two decades prior, while at McDonnell Douglas, to develop a thermoplastic composite crytank for hydrogen storage. He learned a lot of lessons.

Read More
Syensqo high performance materials